PC 2004-M OUTLINE DIMENSION & BLOCK DIAGRAM 146.0 0.5 3.5 139.0 H1 H2 5.0 55.5 55.0 43.0 38.47 K 29.0 A 62.5 0.5 18 32.25 1 P2.54 x 17=43.18 18- 1.0 PAD 18- 1.8 2.5 4.75 18.0 1.6 3.5 118.84 123.5 134.0 4- 2.5 73.0 Vdd Vo RS R/W E DB0 LCD CONTROLLER LS1 COM 16 LCD PANEL 6.0 SEG 40 SEG 160 4.84 0.92 0.06 A K 9.75 9.22 1.1 0.06 SEG DRIVER DB7 Vss BACKLIGHT The tolerance unless classified 0.3mm MECHANICAL SPECIFICATION Overall Size View Area Dot Size Dot Pitch 146.0 x 62.5 123.5 x 43.0 0.92 x 1.10 0.98 x 1.16 Module W /O B/L EL B/L LED B/L ABSOLUTE MAXIMUM RATING PIN ASSIGNMENT Pin no. Symbol Function Power supply(GND) Vss 1 2 Power supply(+) Vdd 3 Contrast Adjust Vo 4 Register select signal RS 5 Data read / write R/W Enable signal E 6 Data bus line DB0 7 8 Data bus line DB1 9 Data bus line DB2 Data bus line DB3 10 11 Data bus line DB4 DB5 Data bus line 12 Data bus line DB6 13 Data bus line 14 DB7 15 A Power supply for LED B/L (+) Power supply for LED B/L ( ) K 16 NC/Vee Negative voltage 17 No connection 18 NC H2 / H1 5.5 / 9.6 5.5 / 9.6 9.0 / 13.1 Symbol Condition Vdd-Vss 25oC 25oC LCD driving supply voltage Vdd-Vee Input voltage 25oC Vin Item Supply for logic voltage Min. -0.3 -0.3 -0.3 Max. Units V 7 13 V Vdd+0.3 V ELECTRICAL CHARACTERISTICS Item Symbol Condition Min. Typical Max. Units 2.7 Power supply voltage Vdd-Vss 25oC 5.5 V Top N W N W N W V -20oC 7.1 7.5 7.9 V LCD operation voltage Vop 0oC Backlight current consumption Idd V V 4.4 V 6.3 V 4 mA mA mA 5.1 4.8 4.1 6.1 4.4 6.4 4.7 6.7 50oC 3.8 70oC LCM current consumption (No B/L) 4.5 25oC 4.1 5.7 Vdd=5V 6 2.5 LED/edge VB/L=4.2V LED/array VB/L=4.2V LCD option: STN, TN, FSTN Backlight Option: LED,EL Backlight feature, other Specs not available on catalog is under request. 770