SR120 RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION SR160 SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 20 to 60 Volts CURRENT 1.0 Ampere FEATURES * * * * * * Low switching noise Low forward voltage drop High current capability High switching capability High surge capabitity High reliability DO-41 MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.33 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At TA = 25 oC unless otherwise noted) SYMBOL SR120 SR130 SR140 SR150 SR160 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 50 60 Volts Maximum RMS Voltage V RMS 14 21 28 35 42 Volts VDC 20 30 40 50 60 Volts RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375” (9.5mm) lead length Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) IO 1.0 Amps I FSM 40 Amps 0 Typical Thermal Resistance (Note 1) R θJA 50 Typical Junction Capacitance (Note 2) CJ 110 Operating Temperature Range TJ Storage Temperature Range -65 to + 125 T STG C/ W pF -65 to + 150 -65 to + 150 0 C 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 1.0A DC Maximum Average Reverse Current @T A = 25 oC at Rated DC Blocking Voltage @T A = 100 oC VF SR120 SR130 SR140 .55 IR NOTES : 1. Thermal Resistance (Junction to Ambient): Vertical PC Board Mounting, 0.5” (12.7mm) Lead Length. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. SR150 SR160 .70 UNITS Volts 1.0 mAmps 10 mAmps 1998-8 Back RECTRON