SHANGHAI SUNRISE ELECTRONICS CO., LTD. KBU6A THRU KBU6M SINGLE PHASE SILICON BRIDGE RECTIFIER TECHNICAL SPECIFICATION VOLTAGE: 50 TO 1000V CURRENT: 6.0A FEATURES KBU • Ideal for printed circuit board • Surge overload rating: 250 A peak • High case dielectric strength • High temperature soldering guaranteed: 250oC/10sec/0.375"(9.5mm) lead length at 5 lbs tension MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: UL-94 Class V-O recognized flame retardant epoxy • Polarity: Polarity symbol marked on body • Mounting position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS SYMBOL Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (Tc=50oC) Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage (at forward current 6.0A DC) Maximum DC Reverse Current Ta=25oC (at rated DC blocking voltage) Ta=100oC Storage and Operating Junction Temperature VRRM VRMS VDC KBU KBU KBU KBU KBU KBU KBU UNITS 6A 6B 6D 6G 6J 6K 6M 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V 50 100 200 400 600 800 1000 V IF(AV) 6.0 A IFSM 250 A VF 1.1 V 10.0 500 -55 to + 150 µA µA IR TSTG,TJ o C http://www.sse-diode.com