CHV2243 Fully Integrated Q-band VCO based on Ku-band Oscillator and Q-band Multiplier GaAs Monolithic Microwave IC Description +V The CHV2243 is a monolithic multifunction for frequency generation. It integrates a Ku-band oscillator with frequency control (VCO), a Q-band frequency multiplier and buffer amplifiers. The VCO is fully integrated. On chip P-HEMT based Schottky diode is used as varactor. All the active devices are internally self biased. The circuit is manufactured with the PHEMT process : 0.25µm gate length, via holes through the substrate, air bridges and electron beam gate lithography. It is available in chip form. n n n n n n n n n F_VCO = F_out/3 RF_out x3 (F_out) V_tune Ku-band VCO + Q-band multiplier Fully integrated VCO Wide frequency tuning range PLL oriented Auxiliary output at VCO frequency High temperature range On-chip self biasing Automatic assembly oriented Chip size 2.41 x 1.18 x 0.1 mm VCO_out_aux Multifunction block diagram 40 39,5 Output frequency (GHz) Main Features -V 39 38,5 38 37,5 37 36,5 0 0,5 1 1,5 2 Tuning voltage (V) Typical tuning characteristic Main Characteristics Tamb = +25°C Symbol Parameter F_out Output centre frequency F_vco Oscillator frequency F_tune1 Pout Min Typ Max Unit 38 38.25 38.5 GHz F_out/3 Output frequency tuning range Output power 1.5 3 GHz 5 7 dBm ESD Protections : Electrostatic discharge sensitive device observe handling precautions ! Ref. : DSCHV22431074 -15-Mar.-01 1/6 Specifications subject to change without notice united monolithic semiconductors S.A.S. Route Départementale 128 - B.P.46 - 91401 Orsay Cedex France Tel. : +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09 Q-band VCO CHV2243 Electrical Characteristics Full temperature range, used according to section “Typical assembly and bias configuration” Symbol F_out F_vco F_tune1 F_tune2 ∆F_tune2(T) P_out H1 H2 P_VCO V_tune F_slope ∆F_slope(T) P_V+ P_VPN +V +I -V -I Top Parameter Output centre frequency VCO frequency Maximum frequency tuning range (@ F_out) Specified frequency tuning range (@ F_out) (1) Maximum variation of Frequency over temperature (2) Output power on RF_out port Sub-harmonics rejection (Fout/3) (2) Sub-harmonics rejection (2*Fout/3) (2) VCO output power on VCO_out_aux port (4) Control voltage range Frequency tuning slope (2) Maximum variation of Frequency tuning slope over temperature (2) Frequency pushing vs positive supply voltage (2) Frequency pushing vs negative supply voltage (2) Phase noise (given at F_out) (2) @ 1kHz @ 10kHz @ 100kHz @ 200kHz @ 1MHz Positive supply voltage (3) Positive supply current Negative supply voltage (3) Negative supply current Operating temperature range Min 38 1.5 200 Typ 38.25 F_out/3 3 300 Max 38.5 Unit GHz 4 500 GHz MHz +300 MHz 12 -11 -12 dBm dBc dBc 0-2 4500 +34 V MHz/v % 150 450 MHz/v 80 250 MHz/v -5 -35 -65 -73 -92 4.5 130 -4.5 4 +5 -25 -55 -63 -82 4.6 180 -4.4 8 +100 dBc/Hz -300 5 1000 -26 4.4 -4.6 -40 7 -16 -17 tbd 0.5-1 2800 V mA V mA °C (1) F_tune2 is the frequency tuning range relative to the specified parameters, this frequency tuning range has to be inside 38 to 38.5GHz. (2) Specified within F_tune2 (3) Negative supply voltage must be applied at least 1µs before positive supply voltage (4) This output is optional, it can be not connected Ref. : DSCHV22431074 -15-Mar.-01 2/6 Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09 Specifications subject to change without notice Q-band VCO CHV2243 Absolute Maximum Ratings (1) Symbol V_tune +V -V +I -I Tstg (1) Parameter Tuning voltage Positive supply voltage Negative supply voltage Positive supply current Negative supply current Storage temperature range Values 2.5 5 -5 250 15 -55 to +155 Unit V V V mA mA °C Operation of this device above anyone of these parameters may cause permanent damage. Ref. : DSCHV22431074 -15-Mar.-01 3/6 Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09 Specifications subject to change without notice Q-band VCO CHV2243 Chip Mechanical Data and Pin References 1040 200 350 1 500 2 650 3 800 4 950 5 1100 6 1250 7 1550 8 1850 9 2150 10 2355 11 12 615 13 14 70 15 1440 Origin 0,0 Layout 2410X1110 Unit = µm External chip size (including saw streets) = 2480 x 1180 +/- 35 Chip thickness = 100 +/- 10 HF Pads (13) = 68 x 118 VCO_out_aux Pad = 100 x 100 DC/IF Pads = 100 x 100 Pin number Pin name 12, 14 3 13 RF_out 8, 10 +V 5, 9 -V 4, 6, 7, 11 1, 2 15 V-tune Description Ground: should not be bonded. If required, please ask for more information. Ground (optional) RF output port @38GHz Positive supply voltage Negative supply voltage NC Tuning voltage input ports (should be connected together, see typical assembly and bias configuration) VCO_out_aux Auxiliary VCO output at 12.7GHz (F_out / 3) (optional) Ref. : DSCHV22431074 -15-Mar.-01 4/6 Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09 Specifications subject to change without notice Q-band VCO CHV2243 Typical Assembly and Bias Configuration DC and control lines -V +V >= 120pF V-tune 1 2 3 4 5 6 7 8 9 10 11 12 µ-strip line 13 14 L_out 15 L_aux µ-strip line This drawing shows an example of assembly and bias configuration. All the transistors are internally self biased. The positive and negative voltages can be respectively connected together (see drawing) according to the recommended values given in the electrical characteristics table. For the RF pads the equivalent wire bonding inductance (diameter=25µm) has to be according to the following recommendation. Port Equivalent inductance (nH) RF_out (13) L_out = 0.28 VCO_out_aux (15) L_aux = 0.4 Approximated wire length (mm) 0.35 0.5 For a micro-strip configuration a hole in the substrate is recommended for chip assembly. Ref. : DSCHV22431074 -15-Mar.-01 5/6 Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09 Specifications subject to change without notice Q-band VCO CHV2243 Ordering Information Chip form : CHV2243-99F/00 Information furnished is believed to be accurate and reliable. However united monolithic semiconductors S.A.S. assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of united monolithic semiconductors S.A.S.. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. United monolithic semiconductors S.A.S. products are not authorised for use as critical components in life support devices or systems without express written approval from united monolithic semiconductors S.A.S. Ref. : DSCHV22431074 -15-Mar.-01 6/6 Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09 Specifications subject to change without notice