ZCOMM PSA3330A

PSA3330A
PHASE LOCKED LOOP
9939 Via Pasar • San Diego, CA 92126
TEL (858) 621-2700 FAX (858) 621-2722
Rev A1
PHASE NOISE (1 Hz BW, typical)
-50
-60
-70
-80
-90
-100
FEATURES
• Frequency Range: 3305 - 3335 MHz
• Step Size:
125 KHz
• PLL-24 - Style Package
-110
APPLICATIONS
• Telecommunications
• Satellite
• Telemetry
-140
-120
-130
-150
1000
10000
VALUE
3305 - 3335
PERFORMANCE SPECIFICATIONS
Frequency Range
100000
1000000
UNITS
MHz
dBc/Hz
Phase Noise @ 10 kHz offset (1 Hz BW, typ.)
-95
Harmonic Suppression (2nd, typ.)
dBc
Sideband Spurs (typ.)
-15
-70
Power Output
-1±3
dBm
50
Ω
125
KHz
5000
µΑ
1
mSec
1
-40 to 85
mSec
Load Impedance
Step Size
Charge Pump Output Current
Switching Speed (typ., adjacent channel)
Startup Lock Time (typ.)
Operating Temperature Range
dBc
°C
PLL-24
Package Style
POWER SUPPLY REQUIREMENTS
Supply Voltage (Vcc, nom.)
Supply Current (Icc, typ.)
5
Vdc
50
mA
All specifications are typical unless otherwise noted and subject to change without notice.
APPLICATION NOTES
• AN-107
• AN-200
• AN-201
: How to Solder Z-COMM VCOs / PLLs
: Mounting and Grounding of Z-COMM PLLs
: PLL Fundamentals
AN-202 : PLL Functional Description
NOTES:
Reference Oscillator Signal: 5 MHz<f o s c <100 MHz
Frequency Synthesizer: Analog Devices - ADF4106
© Z-Communications, Inc.
Prescaler: 32
Page 1
All rights reserved
LOW COST - HIGH PERFORMANCE
PHASE LOCKED LOOP
PSA3330A
PAGE 2
FREQUENCY (MHz)
VCO TUNING CURVE, typ.
70
25
0
°c
°c
°c
TUNING VOLTAGE (Vdc)
OUTPUT POWER (dBm)
VCO POWER CURVE, typ.
25
°c
FREQUENCY (MHz)
1.
SIDE VIEW
.032
0.140
.580
.605
.455
.370
.285
.200
.115
-.026
.000
PHYSICAL DIMENSIONS
-.025
24 23 22 21 20
2.
.000
PIN 1
.153
.238
.323
.408
.493
1
19
2
18
3
.578
17
TOP
5
SEE DETAIL A
.663
4.
5.
16
4
BOTTOM
3.
15
6
14
7
13
.816
.841
8
9 10 11 12
SEE DETAIL B
.055
.015
.030
DETAIL B (TYP)
DETAIL A
© Z-Communications, Inc.
TABS RANGE:
SEE NOTE 5
(8 PLACES)
Page 2
The inside radius of all 24 half holes at the perimeter of
the board are plated to provide a surface for the
attachment of the PLL Module to the PCB. 16 pads are
for grounding, 8 pads are for signal interface.
The surface of the shield is tin-plated and may be
soldered to. The shield’s base metal is cold-rolled steel.
The ground plane on the bottom side is ground and
attaches to a ground track on the top side of the board
as well as to the shield.
Unless otherwise noted all dimensions are in inches.
Unless otherwise noted all tolerances are as follows:
.xxx = ± .010.
P1
P2-4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
P16
P17
P18-24
RF OUTPUT
GROUND
REFERENCE OSCILLATOR INPUT
GROUND
CLOCK
DATA
GROUND
LOAD ENABLE
GROUND
LOCK DETECT
VCC
GROUND
GROUND
GROUND
NO CONNECTION
GROUND
Printed in the U.S.A.