The VTX-5682A pulsed-coupled cavity TWT covers 9.0 GHz to 9.5 GHz with 30 kW peak output power, 1.0 % duty cycle. This device is Cathode pulsed with a isolated collector to achieve 48 dB gain. Custom configurations are also available. These variations in the performance and configuration include: grid modulation, cooling method (affects average power level), mechanical configuration, electrical and RF connections. Typical Operating Parameters Features • • • • • • • • • 9.0 GHz to 9.5 GHz 30 kW PEAK OUTPUT POWER 1.0% DUTY CYCLE CATHODE PULSED 48 dB GAIN ISOLATED COLLECTOR FORCED AIR COOLED PPM FOCUSED WR 90 WAVEGUIDE, INPUT AND OUTPUT PARAMETER Cathode Voltage Cathode Current Heater Voltage Heater Current RF Drive Power Pulse Width Duty Cycle Cooling Flow Rate Pressure Drop Weight Dimensions MIN -27 --9 --------2.0 ------- MAX -25 7.0 11 4 0.25 50 1.0 --2.5 16 4 X4X18 The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For additional information on CPI MPP products contact: CPI MPP, Coupled Cavity TWT Operation - 3120 Hansen Way, Palo Alto, CA 94303-0750 Phone: 650-846-3073, Fax: 650-857-1708, Email: [email protected], www.cpii.com/mpp UNITS kV a V A W µsec % lbm/min In H2O lbs inches