The VTX-5686C pulsed-coupled cavity TWT covers 9.5 GHz to 10.5 GHz with 120 kW peak output power, 30 % duty cycle. This device has a Mode-Anode pulsed and single stage depressed collector to achieve 48 dB gain. Custom configurations are also available. These variations in the performance and configuration include: cooling method (affects average power level), mechanical configuration, electrical and RF connections. Typical Operating Parameters PARAMETER MIN MAX -44 --9 --38 -1100 -42 12 11 8 40 -900 200 40 10 300 30 --60 350 Features • • • • • • • • • 9.5 GHz to 10.5 GHz 120 kW PEAK OUTPUT POWER 30% DUTY CYCLE MODE-ANODE PULSED 48 dB GAIN SINGLE STAGE DEPRESSED COLLECTOR FORCED LIQUID COOLED SOLENOID FOCUSED WR 90 WAVEGUIDE, INPUT AND OUTPUT Cathode Voltage Cathode Current Heater Voltage Heater Current Collector Voltage Mod-Anode Bias Voltage Solenoid Voltage Solenoid Current RF Drive Power Pulse Width Duty Cycle Cooling Flow Rate Pressure Drop Weight Dimensions --------60 ------- 24 dia X 40 lg The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For additional information on CPI MPP products contact: CPI MPP, Coupled Cavity TWT Operation - 3120 Hansen Way, Palo Alto, CA 94303-0750 Phone: 650-846-3073, Fax: 650-857-1708, Email: [email protected], www.cpii.com/mpp UNIT S kV a V A kV V V A W µsec % gpm psi lbs inches