MBRF1020CT THRU MBRF10100CT SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 20 to 100 Volts Forward Current - 10.0 Ampere FEATURES ● ● ● ● ● ● ITO-220AB Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Dual rectifier construction, positive center tap Metal silicon junction, majority carrier conduction Low power loss, high efficiency Guardring for overvoltage protection For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications .406(10.3) .386(9.8) ● ● ● ● ● Case: JEDEC ITO-220AB molded plastic body Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 High temperature soldering guaranteed: 250oC/10 seconds, 0.25" (6.35mm) from case Polarity: As marked Mounting Position: Any Mounting Torque: 10 in-lbs maximum Weight: 0.08 ounce, 2.24 grams .189(4.8) .173(4.4) .118(3.0) .106(2.7) .610(15.5) .571(14.5) .157(4.0) .142(3.6) MECHANICAL DATA ● ● .138(3.5) .122(3.1) .118(3.0) .102(2.6) .071(1.8) .055(1.4) .571(14.5) .531(13.5) .059(1.5) .043(1.1) .030(0.76) .020(0.51) .112(2.84) .088(2.24) .114(2.9) .098(2.5) .030(0.76) .020(0.51) Dim ensions in inches and (m illim eters) PIN 1 - + PIN 3 - PIN 2 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TC = 95°C Symbol MBRF 1020CT MBRF 1030CT MBRF 1040CT VRRM VRWM VR 20 30 40 45 50 60 80 100 V VR(RMS) 14 21 28 32 35 42 56 70 V MBRF MBRF 1045CT 1050CT MBRF MBRF MBRF 1060CT 1080CT 10100CT Unit IO 10 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 150 A Forward Voltage @IF = 5.0A VFM Peak Reverse Current @TA = 25°C At Rated DC Blocking Voltage @TA = 100°C IRM 0.5 50 mA Cj 700 pF Tj, TSTG -65 to +150 °C Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 0.55 0.75 0.85 V MBRF1020CT THRU MBRF10100CT RATINGS AND CHARACTERISTIC CURVES 40 8 6 4 2 Single Pulse Half-Wave 60 Hz Resistive or Inductive Load 0 10 40 60 80 100 120 140150 IF, NSTA NTA NEOUS FORWA RD CURRENT (A ) I(AV), AVERAGE OUTPUT CURRENT (A ) 10 1050CT - 1060CT 1080CT - 10100CT 10 Tj = 25ºC Pulse Width = 300 µs 2% Duty Cycle 1 0.5 0 TC, CASE TEM PERATURE (º C) Fig. 1 Forward Current Derating Curve 1.0 1.5 2.0 2.5 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 2000 150 Tj = 25ºC f = 1MHz 120 Cj, CA PACITA NCE (p F) IFSM , PEA K FORWA RD SURGE CURRENT (A) 1020CT - 1045CT 20 90 60 1000 30 8.3ms Single Half Sine-Wave JEDEC Method 0 1 10 100 100 NUMBER OF CYCLES AT 60 Hz Fig. 3 Maximum Non-Repetitive Peak Fwd Surge Current 0.1 1.0 10 VR, REVERSE VOLTAGE (V) Fig. 4 Ty p ical Ju nct io n Cap acit ance 100