EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet TOP Views LEDs 67-21/S2C-FQ2R2B/2T Features ․P-LCC-2 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free Descriptions ․The 67-21 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes it ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․Light pipe application. ․General use. Device Selection Guide Chip Lens Color Material Emitted Color AlGaInP Brilliant Orange Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-244 prepared date:12-17-2004 Water Clear Rev. 1 Page: 1 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 67-21/S2C-FQ2R2B/2T Package Dimensions Note: The tolerances unless mentioned is ±0.1mm Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-244 prepared date:12-17-2004 Rev. 1 Page: 2 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 67-21/S2C-FQ2R2B/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 50 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +100 ℃ Soldering Temperature Tsol 260 (for 5 second) ℃ Electrostatic Discharge ESD 2000 V Power Dissipation Pd 120 mW Peak Forward Current(Duty 1/10 @ 1KHz) IFP 100 mA Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity IV 90 ----- 180 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Peak Wavelength λp ----- 611 ----- nm IF=20mA Dominant Wavelength λd 603 ----- 609 nm IF=20mA △λ ----- 17 ----- nm IF=20mA Spectrum Radiation Bandwidth Forward Voltage VF 1.75 2.0 2.35 V IF=20mA Reverse Current IR ----- ----- 10 μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-244 prepared date:12-17-2004 Rev. 1 Page: 3 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 67-21/S2C-FQ2R2B/2T Bin Range Of Dominant Wavelength Group F Unit Condition nm IF=20mA Max Unit Condition 112 140 180 mcd IF=20mA Unit Condition V IF=20mA Bin Code Min. Max. EE1 603 606 EE2 606 609 Bin Rang Of Luminous Intensity Bin Min Q2 R1 R2 90 112 140 Bin Rang Of Forward Voltage Group Bin 0 1 B 2 Notes: Min 1.75 1.95 2.15 Max 1.95 2.15 2.35 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-244 prepared date:12-17-2004 Rev. 1 Page: 4 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 67-21/S2C-FQ2R2B/2T Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-244 prepared date:12-17-2004 Rev. 1 Page: 5 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 67-21/S2C-FQ2R2B/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-244 prepared date:12-17-2004 Rev. 1 Page: 6 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 67-21/S2C-FQ2R2B/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: The tolerances unless mentioned is ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moistue-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-244 prepared date:12-17-2004 Desiccant Rev. 1 Label Page: 7 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 67-21/S2C-FQ2R2B/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-244 prepared date:12-17-2004 Rev. 1 Page: 8 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 67-21/S2C-FQ2R2B/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-244 prepared date:12-17-2004 Rev. 1 Page: 9 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 67-21/S2C-FQ2R2B/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-244 prepared date:12-17-2004 Rev. 1 Page: 10 of 10 Prepared by: Bennett