EVERLIGHT 67-31A/SAC

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet (Preliminary)
Power Top View LED
67-31A/SAC-AW1X2B9Z5/2T
Features
․PLCC-3 package.
․High flux output.
․High current capability.
․White package.
․Optical indicator.
․Colorless clear window.
․Ideal for backlight and light pipe application.
․Inter reflector.
․Wide viewing angle.
․Suitable for automatic placement equipment.
․Suitable for reflow and wave solder processes.
․Available on tape and reel (8mm Tape).
․Pb-free.
․The product itself will remain within RoHS compliant version.
Descriptions
The 67-31A series is available in soft orange, red
and yellow. Due to the package design, the LED has
wide viewing angle and optimized light coupling by
inter reflector.
This feature makes the ideal for light pipe
application. The low current requirement makes this
device ideal for portable equipment or any other
application where power is at a premium.
Applications
․Indicator and backlight for audio and video equipment.
․Indicator and backlight in office and family equipment.
․Flat backlight for LCD’s, switches and symbols.
․Light pipe application.
․General use.
Device Selection Guide
Chip
Material
Emitted Color
AlGaInP
Reddish Orange
Everlight Electronics Co., Ltd.
Device No. :
Lens Color
Water Clear
http://www.everlight.com
prepared date:23-Aug-2006
Rev. 1
Page: 1 of 10
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
67-31A/SAC-AW1X2B9Z5/2T
Package Dimensions
Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
prepared date:23-Aug-2006
Rev. 1
Page: 2 of 10
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
67-31A/SAC-AW1X2B9Z5/2T
Absolute Maximum Ratings (TA=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
70
mA
Peak Forward Current (Duty 1/10 @1KHz)
IFP
100
mA
Power Dissipation
Pd
120
mW
Electrostatic Discharge(HBM)
ESD
2000
V
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +90
℃
Soldering Temperature
Tsol
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Electronic Optical Characteristics :
Parameter
Symbol
Min.
Typ.
Max.
Unit Condition
Luminous Intensity
Iv
1120
-----
2850
mcd
IF=50mA
Viewing Angle
2θ1/2
-----
120
-----
deg
IF=50mA
Peak Wavelength
λP
-----
611
-----
nm
IF=50mA
Dominant Wavelength
λd
605.5
-----
625.5
nm
IF=50mA
Spectrum Radiation
Bandwidth
△λ
-----
18
-----
nm
IF=50mA
Forward Voltage
VF
2.15
-----
2.75
V
IF=50mA
Reverse Current
IR
-----
-----
10
μA
VR=5V
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.1V
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
prepared date:23-Aug-2006
Rev. 1
Page: 3 of 10
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
67-31A/SAC-AW1X2B9Z5/2T
Bin Range Of Dominant Wavelength
Bin Code
Min.
Max.
Unit
Condition
E1
E2
E3
E4
E5
605.5
609.5
613.5
617.5
621.5
609.5
613.5
617.5
621.5
625.5
nm
IF=50mA
Bin Range Of Luminous Intensity
Bin
Min
Max
Unit
Condition
W1
W2
X1
X2
1120
1420
1800
2250
1420
1800
2250
2850
mcd
IF=50mA
Bin Range Of Forward Voltage
Group
Bin
Min
Max
Unit
Condition
B9
2
3
4
2.15
2.35
2.55
2.35
2.55
2.75
V
IF=50mA
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.1V
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
prepared date:23-Aug-2006
Rev. 1
Page: 4 of 10
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
67-31A/SAC-AW1X2B9Z5/2T
Typical Electro-Optical Characteristic Curves
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
prepared date:23-Aug-2006
Rev. 1
Page: 5 of 10
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
67-31A/SAC-AW1X2B9Z5/2T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm,Unit = mm
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
prepared date:23-Aug-2006
Rev. 1
Page: 6 of 10
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
67-31A/SAC-AW1X2B9Z5/2T
Carrier Tape Dimensions; Loaded quantity per reel 2000 PCS/reel
Note: Tolerances Unless Dimension ±0.1mm Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Everlight Electronics Co., Ltd.
Device No. :
Desiccant
http://www.everlight.com
prepared date:23-Aug-2006
Label
Rev. 1
Page: 7 of 10
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
67-31A/SAC-AW1X2B9Z5/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
No.
Items
Test Condition
1
Reflow Soldering
Temp. : 260℃±5℃
Min. 5 sec.
Test
Sample
Ac/Re
Hours/Cycles Size
22 PCS
0/1
Temperature Cycle
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
300 Cycles 22 PCS.
0/1
3
Thermal Shock
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles 22 PCS.
0/1
4
High Temperature
Storage
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
5
Low Temperature
Storage
Temp. : -40℃
1000 Hrs.
22 PCS.
0/1
6
DC Operating Life
IF = 20 mA / 25℃
1000 Hrs.
22 PCS.
0/1
7
High Temperature /
High Humidity
85℃/85%RH
1000 Hrs.
22 PCS.
0/1
2
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
prepared date:23-Aug-2006
6 Min.
Rev. 1
Page: 8 of 10
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
67-31A/SAC-AW1X2B9Z5/2T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
1~5 °C / Sec.
260 °C Max
10 Sec. Max.
1~5 °C / Sec.
Pre-heating
180~200°C
60 Sec. Max.
Above 220°C
120 Sec. Max.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
prepared date:23-Aug-2006
Rev. 1
Page: 9 of 10
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
67-31A/SAC-AW1X2B9Z5/2T
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Everlight Electronics Co., Ltd.
Device No. :
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
http://www.everlight.com
prepared date:23-Aug-2006
Rev. 1
Page: 10 of 10
Prepared by: Ya_Hui Fang