KINGBRIGHT APKA2810ZGC-F01

2.8X1.0mm RIGHT ANGLE SMD CHIP
LED LAMP
Part Number: APKA2810ZGC-F01
PRELIMINARY SPEC
Green
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Description
Features
z 2.8mmX1.0mm RIGHT ANGLE SMT LED, 1.2mm
THICKNESS.
z LOW POWER CONSUMPTION.
z IDEAL FOR BACKLIGHT AND INDICATOR.
z VARIOUS COLORS AND LENS TYPES AVAILABLE.
The Green source color devices are made with AlInGaN
on Sapphire Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
z PACKAGE : 2000PCS / REEL.
z MOISTURE SENSITIVITY LEVEL : LEVEL 4.
z RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(±0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH3768
REV NO: V.1
DATE: APR/27/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 1 OF 5
ERP: 1204000789
Selection Guide
Part No.
Dice
APKA2810ZGC-F01
Iv (mcd) [2]
@ 20mA
Lens Type
Green (AlInGaN)
Viewing
Angle [1]
Min.
Typ.
2θ1/2
110
300
90°
WATER CLEAR
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Green
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
515
nm
IF=20mA
Green
525
nm
IF=20mA
Spectral Line Half-width
Green
30
nm
IF=20mA
C
Capacitance
Green
45
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Green
3.3
4.1
V
IF=20mA
IR
Reverse Current
Green
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Green
Units
Power dissipation
102.5
mW
DC Forward Current
25
mA
Peak Forward Current [1]
150
mA
5
V
Reverse Voltage
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAH3768
REV NO: V.1
DATE: APR/27/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 2 OF 5
ERP: 1204000789
Green
APKA2810ZGC-F01
SPEC NO: DSAH3768
REV NO: V.1
DATE: APR/27/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 3 OF 5
ERP: 1204000789
APKA2810ZGC-F01
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAH3768
REV NO: V.1
DATE: APR/27/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 4 OF 5
ERP: 1204000789
PACKING & LABEL SPECIFICATIONS
APKA2810ZGC-F01
SPEC NO: DSAH3768
REV NO: V.1
DATE: APR/27/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 5 OF 5
ERP: 1204000789