STC6075Q NPN Silicon Transistor Descriptions PIN Connection • General purpose amplifier • High voltage application Features • High collector breakdown voltage : VCEO = 90V • Low collector saturation voltage : VCE(sat)=0.5V(MAX.) SOT-223 Ordering Information Type No. Marking STC6075Q STC6075□ Package Code SOT-223 □ : Year & Week Code Absolute maximum ratings (Ta=25°C) Characteristic Symbol Ratings Unit Collector-Base voltage VCBO 120 V Collector-Emitter voltage VCEO 90 V Emitter-Base voltage VEBO 6 V IC 1.5 A(DC) ICP* 3.0 A(Pulse) PC 1.1 Collector current Collector power dissipation ** PC W 1.5 Junction temperature TJ 150 °C Storage temperature Tstg -55~150 °C * : Single pulse, tp= 300 ㎲ ** : When mounted on ceramic substrate(250 ㎟×0.8t) KSD-T5A006-000 1 STC6075Q Electrical Characteristics (Ta=25°C) Characteristic Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=100μA, IE=0 120 - - V Collector-Emitter breakdown voltage BVCEO IC=1mA, IB=0 90 - - V Emitter-Base breakdown voltage BVEBO IE=100μA, IC=0 6 - - V Collector cut-off current ICBO VCB=90V, IE=0 - - 0.1 ㎂ Emitter cut-off current IEBO VEB=4V, IC=0 - - 0.1 ㎂ DC current gain hFE 1) VCE=5V, IC= 30 ㎃ 200 - 400 - Collector-Emitter saturation voltage VCE(sat)2) IC=500 ㎃, IB=50 ㎃ 0.5 V Base-Emitter saturation voltage VBE(sat) 2) IC=500 ㎃, IB=50 ㎃ - - 1.5 V Transition frequency fT VCE=5V, IC= 50 ㎃ - 170 - ㎒ Collector output capacitance Cob VCB=10V, IE=0, f=1 ㎒ - 10 - ㎊ * Note 1) hFE Rank : 200~400 only * Note 2) Pulse Tester : Pulse Width ≤300μs, Duty Cycle ≤2.0% KSD-T5A006-000 2 STC6075Q Electrical Characteristic Curves Fig. 1 PC - Ta Fig. 2 IC - VBE Fig. 3 VCE(sat) - IC Fig. 4 IC - VCE Fig. 5 IC - VCE Fig. 6 hFE-IC KSD-T5A006-000 3 STC6075Q Electrical Characteristic Curves Fig. 7 hFE-IC Fig. 8 hFE-IC Fig. 9 Cob - VCB Fig. 10 fT - IC ℃ Fig. 11 Safe Operating Area KSD-T5A006-000 4 STC6075Q Outline Dimension ※ Recommend PCB solder land KSD-T5A006-000 [Unit: mm] 5 STC6075Q The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T5A006-000 6