STD1664 NPN Silicon Transistor PIN Connection Description • Medium power amplifier application Features • PC(Collector power dissipation)=1W (Ceramic substate of 250 ㎟×0.8t used) • Low collector saturation voltage : VCE(sat)=0.15V(Typ.) • Complementary pair with STB1132 SOT-89 Ordering Information Type NO. Marking STD1664 A2 □YWW A2: DEVICE CODE, Package Code SOT-89 □ : hFE rank, YWW(Y : Year code, WW : Weekly code) Absolute maximum ratings (Ta=25°C) Characteristic Symbol Ratings Unit Collector-Base voltage VCBO 40 V Collector-Emitter voltage VCEO 32 V Emitter-Base voltage VEBO 5 V IC 1 A(DC) ICP* 2 A(Pulse) PC 0.5 PC* 1 Junction temperature TJ 150 °C Storage temperature Tstg -55~150 °C Collector current Collector power dissipation W * : Single pulse, tp= 300 ㎲ ** : When mounted on ceramic substrate(250 ㎟×0.8t) KSD-T5B009-001 1 STD1664 Electrical Characteristics Characteristic (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=50 ㎂, IE=0 40 - - V Collector-Emitter breakdown voltage BVCEO IC=1 ㎃, IB=0 32 - - V Emitter-Base breakdown voltage BVEBO IE=50 ㎂, IC=0 5 - - V Collector cut-off current ICBO VCB=20V, IE=0 - - 0.5 ㎂ Emitter cut-off current IEBO VEB=4V, IC=0 - - 0.5 ㎂ DC current gain hFE* VCE=3V, IC=0.1A 100 - 320 - IC=500 ㎃, IB=50 ㎃ - 0.15 0.4 V VCE=5V, IC=50 ㎃ - 150 - ㎒ VCB=10V, IE=0, f=1 ㎒ - 15 - ㎊ Collector-Emitter saturation voltage Transition frequency Collector output capacitance VCE(sat) fT Cob * : hFE rank / O : 100 ~ 200, Y : 160 ~ 320 KSD-T5B009-001 2 STD1664 Electrical Characteristic Curves Fig. 1 PC - Ta ㎃ ㎽ Fig. 2 IC - VBE Fig. 4 VCE(sat) - IC ㎃ Fig. 3 IC - VCE ㎃ ㎃ ㎃ ㎃ ㎃ ㎃ ㎃ ㎃ ㎃ ㎃ Fig. 5 hFE - IC ㎃ KSD-T5B009-001 3 STD1664 Outline Dimension(mm) ※Recommend PCB solder land [Unit: mm] KSD-T5B009-001 4 STD1664 The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T5B009-001 5