TI TLC227XA

TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
D
D
D
D
D
D
D
Output Swing Includes Both Supply Rails
Low Noise . . . 9 nV/√Hz Typ at f = 1 kHz
Low Input Bias Current . . . 1 pA Typ
Fully Specified for Both Single-Supply and
Split-Supply Operation
Common-Mode Input Voltage Range
Includes Negative Rail
High-Gain Bandwidth . . . 2.2 MHz Typ
High Slew Rate . . . 3.6 V/µs Typ
D
D
D
D
Low Input Offset Voltage
950 µV Max at TA = 25°C
Macromodel Included
Performance Upgrades for the TS272,
TS274, TLC272, and TLC274
Available in Q-Temp Automotive
HighRel Automotive Applications
Configuration Control / Print Support
Qualification to Automotive Standards
MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE
vs
SUPPLY VOLTAGE
The TLC2272 and TLC2274 are dual and
quadruple operational amplifiers from Texas
Instruments. Both devices exhibit rail-to-rail
output performance for increased dynamic range
in single- or split-supply applications. The
TLC227x family offers 2 MHz of bandwidth and
3 V/µs of slew rate for higher speed applications.
These devices offer comparable ac performance
while having better noise, input offset voltage, and
power dissipation than existing CMOS
operational amplifiers. The TLC227x has a noise
voltage of 9 nV/√Hz, two times lower than
competitive solutions.
V
V(OPP)
O(PP) – Maximum Peak-to-Peak Output Voltage – V
description
16
TA = 25°C
14
12
IO = ± 50 µA
10
8
IO = ± 500 µA
The TLC227x, exhibiting high input impedance
6
and low noise, is excellent for small-signal
conditioning for high-impedance sources, such as
4
piezoelectric transducers. Because of the micro16
10
12
14
4
6
8
power dissipation levels, these devices work well
|VDD ±| – Supply Voltage – V
in hand-held monitoring and remote-sensing
applications. In addition, the rail-to-rail output
feature, with single- or split-supplies, makes this
family a great choice when interfacing with
analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available and has a
maximum input offset voltage of 950 µV. This family is fully characterized at 5 V and ± 5 V.
The TLC2272/4 also makes great upgrades to the TLC272/4 or TS272/4 in standard designs. They offer
increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set
allows them to be used in a wider range of applications. For applications that require higher output drive and
wider input voltage range, see the TLV2432 and TLV2442 devices.
If the design requires single amplifiers, please see the TLV2211/21/31 family. These devices are single
rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption, make
them ideal for high density, battery-powered equipment.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Advanced LinCMOS is a trademark of Texas Instruments Incorporated.
Copyright  1999, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2272 AVAILABLE OPTIONS
PACKAGED DEVICES
TA
VIOmax At
25°C
0°C to 70°C
950 µV
µ
2.5 mV
TLC2272ACD
TLC2272CD
TLC2272ACP
TLC2272CP
TLC2272CPW
– 40°C to 85°C
950 µ
µV
2.5 mV
TLC2272AID
TLC2272ID
TLC2272AIP
TLC2272IP
—
– 40°C to 125°C
950 µ
µV
2.5 mV
TLC2272AQD
TLC2272QD
– 55°C to 125°C
950 µV
µ
2.5 mV
TLC2272AMD
TLC2272MD
SMALL
OUTLINE†
(D)
TSSOP‡
(PW)
PLASTIC DIP
(P)
TLC2272AQPW
TLC2272QPW
—
TLC2272AMP
TLC2272MP
—
† The D packages are available taped and reeled. Add R suffix to the device type (e.g., TLC2272CDR).
‡ The PW package is available taped and reeled. Add R suffix to the device type (e.g., TLC2272PWR).
§ Chips are tested at 25°C.
TLC2274 AVAILABLE OPTIONS
PACKAGED DEVICES
TA
VIOmax AT
25°C
0°C to
70°C
950 µ
µV
2.5 mV
TLC2274ACD
TLC2274CD
—
—
TLC2274ACN
TLC2274CN
—
TLC2274CPW
– 40°C to
85°C
950 µ
µV
2.5 mV
TLC2274AID
TLC2274ID
—
—
TLC2274AIN
TLC2274IN
—
TLC2274IPW
– 40°C to
125°C
950 µ
µV
2.5 mV
TLC2274AQD
TLC2274QD
—
—
– 55°C to
125°C
950 µV
µ
2.5 mV
TLC2274AMD
TLC2274MD
TLC2274AMFK
TLC2274MFK
SMALL
OUTLINE†
(D)
CHIP
CARRIER
(FK)
CERAMIC
DIP
(J)
TLC2274AMJ
TLC2274MJ
PLASTIC
DIP
(N)
TSSOP‡
(PW)
—
—
TLC2274AMN
TLC2274MN
—
† The D packages are available taped and reeled. Add R suffix to device type (e.g., TLC2274CDR).
‡ The PW package is available taped and reeled.
§ Chips are tested at 25°C.
1
8
2
7
3
6
4
5
VDD +
2OUT
2IN –
2IN +
1OUT
1IN –
1IN +
VDD +
2IN +
2IN –
2OUT
1
14
2
13
3
12
4
11
5
10
6
9
7
8
4OUT
4IN –
4IN +
VDD –
3IN +
3IN –
3OUT
1IN +
NC
VDD +
NC
2IN +
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
2IN –
2OUT
NC
3OUT
3IN –
1OUT
1IN –
1IN +
VDD – /GND
TLC2274
FK PACKAGE
(TOP VIEW)
TLC2274
D, J, N, OR PW PACKAGE
(TOP VIEW)
1IN –
1OUT
NC
4OUT
4IN –
TLC2272
D, P, OR PW PACKAGE
(TOP VIEW)
NC – No internal connection
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
4IN +
NC
VDD –
NC
3IN +
equivalent schematic (each amplifier)
VDD +
Q3
Q6
Q9
Q12
Q14
Q16
IN +
OUT
C1
IN –
Q1
Q4
Q13
Q15
Q17
D1
Q2
Q5
R3
R4
Q7
Q8
Q10
Q11
R1
ACTUAL DEVICE COMPONENT COUNT†
TLC2272
TLC2274
Transistors
COMPONENT
38
76
Resistors
26
52
Diodes
9
18
Capacitors
3
6
† Includes both amplifiers and all ESD, bias, and trim circuitry
3
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
VDD –
R2
TLC227x, TLC227xA
Advanced LinCMOS  RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
R5
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VDD + (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 V
Supply voltage, VDD – (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 8 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 16 V
Input voltage, VI (any input, see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDD– – 0.3 V to VDD+
Input current, II (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 5 mA
Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 50 mA
Total current into VDD + . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 50 mA
Total current out of VDD – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 50 mA
Duration of short-circuit current at (or below) 25°C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited
Continuous total dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 85°C
Q suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 125°C
M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, N, P or PW package . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J package . . . . . . . . . . . . . . . . . . . . . 300°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VDD+ and VDD –.
2. Differential voltages are at IN+ with respect to IN –. Excessive current will flow if input is brought below VDD – – 0.3 V.
3. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum
dissipation rating is not exceeded.
DISSIPATION RATING TABLE
PACKAGE
TA ≤ 25°C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
TA = 85°C
POWER RATING
TA = 125°C
POWER RATING
D–8
725 mW
5.8 mW/°C
464 mW
337 mW
145 mW
D–14
950 mW
7.6 mW/°C
608 mW
494 mW
190 mW
FK
1375 mW
11.0 mW/°C
880 mW
715 mW
275 mW
J
1375 mW
11.0 mW/°C
880 mW
715 mW
275 mW
N
1150 mW
9.2 mW/°C
736 mW
598 mW
230 mW
P
1000 mW
8.0 mW/°C
640 mW
520 mW
200 mW
PW–8
525 mW
4.2 mW/°C
336 mW
273 mW
105 mW
PW–14
700 mW
5.6 mW/°C
448 mW
364 mW
—
recommended operating conditions
C SUFFIX
MIN
Supply voltage, VDD ±
± 2.2
Input voltage range, VI
Common-mode input voltage, VIC
VDD –
VDD –
Operating free-air temperature, TA
0
4
MAX
±8
VDD + – 1.5
VDD + – 1.5
70
I SUFFIX
MIN
± 2.2
VDD –
VDD –
– 40
POST OFFICE BOX 655303
Q SUFFIX
MAX
±8
VDD + – 1.5
VDD + – 1.5
85
MIN
± 2.2
VDD –
VDD –
– 40
• DALLAS, TEXAS 75265
MAX
±8
VDD + – 1.5
VDD + – 1.5
125
M SUFFIX
MIN
± 2.2
VDD –
VDD –
– 55
MAX
±8
UNIT
V
VDD + – 1.5
VDD + – 1.5
V
125
°C
V
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2272C electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise
noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
Input offset voltage
long-term drift
(see Note 4)
IIO
Input offset current
IIB
Input bias current
VICR
Common-mode input
voltage range
TEST CONDITIONS
High
level output
High-level
voltage
25°C
2.5 V,
VDD ± = ± 2
V
RS = 50 Ω
VIC = 0,
0
VO = 0,
Large signal differential
Large-signal
lification
voltage am
amplification
2500
VIC = 2
2.5
5V
V,
IOL = 500 µA
IOL = 5
mA
RL = 10 kΩ‡
VIC = 2.5
25V
V,
VO = 1 V to 4 V
RL = 1 mΩ‡
300
MAX
950
1500
UNIT
µV
µV/°C
25°C
0.002
0.002
µV/mo
25°C
0.5
0.5
100
100
1
1
100
25°C
0
to
4
Full range
g
0
to
3.5
25°C
IOL = 50 µA
TYP
2
|VIO | ≤ 5 mV
IOH = – 200 µA
MIN
2
25°C
5V
VIC = 2
2.5
V,
AVD
300
Full range
VIC = 2.5 V,
Low-level
Low
level output
voltage
MAX
Full range
RS = 50 Ω,
Ω
TLC2272AC
TYP
3000
25°C
to 70°C
IOH = – 1 mA
VOL
TLC2272C
MIN
Full range
IOH = – 20 µA
VOH
TA†
– 0.3
to
4.2
100
0
to
4
4.85
Full range
4.85
25°C
4.25
Full range
4.25
V
4.99
4.93
4.85
4.93
V
4.85
4.65
4.25
4.65
4.25
25°C
0.01
25°C
0.09
Full range
0.01
0.15
0.09
0.15
25°C
0.9
Full range
15
Full range
15
35
0.15
0.15
1.5
0.9
1.5
25°C
pA
– 0.3
to
4.2
0
to
3.5
4.99
25°C
pA
V
1.5
1.5
15
35
15
V/mV
25°C
175
175
rid
Differential input
resistance
25°C
1012
1012
Ω
ri
Common-mode input
resistance
25°C
1012
1012
Ω
ci
Common-mode input
capacitance
f = 10 kHz,
P package
25°C
8
8
pF
zo
Closed-loop output
impedance
f = 1 MHz,
AV = 10
25°C
140
140
Ω
CMRR
Common-mode
rejection ratio
VIC = 0 to 2.7 V,,
VO = 2.5 V,
RS = 50 Ω
25°C
70
Full range
70
kSVR
Supply-voltage
y
g rejection
j
ratio (∆VDD /∆VIO)
VDD = 4.4 V to 16 V,
VIC = VDD /2, No load
25°C
80
Full range
80
IDD
Supply current
2 5 V,
V
VO = 2.5
No load
25°C
Full range
75
70
75
dB
70
95
80
95
dB
80
2.2
3
3
2.2
3
3
mA
† Full range is 0°C to 70°C.
‡ Referenced to 2.5 V
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2272C operating characteristics at specified free-air temperature, VDD = 5 V
PARAMETER
SR
Slew rate at unity
gain
g
TEST CONDITIONS
VO = 0.5 V to 2.5 V,
RL = 10 kΩ‡,
CL = 100 pF‡
TA†
TLC2272C
MIN
TYP
25°C
2.3
3.6
Full
range
17
1.7
TLC2272AC
MAX
MIN
TYP
2.3
3.6
V/µs
Equivalent
q
input
noise voltage
f = 10 Hz
25°C
50
50
f = 1 kHz
25°C
9
9
Peak-to-peak
equivalent input
noise voltage
f = 0.1 Hz to 1 Hz
25°C
1
1
VNPP
f = 0.1 Hz to 10 Hz
25°C
1.4
1.4
In
Equivalent input
noise current
25°C
0.6
0.6
THD + N
Total
T
t lh
harmonic
i
distortion plus
lus noise
VO = 0.5 V to 2.5 V,
f = 20 kHz,
RL = 10 kΩ‡,
Gain-bandwidth
product
f = 10 kHz,
CL = 100 pF‡
RL = 10 kΩ‡,
Maximum
output-swing
bandwidth
VO(PP) = 2 V,
RL = 10 kΩ‡,
AV = 1,
CL = 100 pF‡
Settling time
AV = – 1,
Step = 0.5 V to 2.5 V,,
RL = 10 kΩ‡,
CL = 100 pF‡
BOM
ts
φm
Phase margin at
unity gain
RL = 10 kΩ‡,
6
fA/√Hz
0.0013%
0.004%
0.03%
0.03%
25°C
2.18
2.18
MHz
25°C
1
1
MHz
15
1.5
15
1.5
26
2.6
26
2.6
25°C
50°
50°
25°C
10
10
µs
25°C
To 0.01%
0 01%
POST OFFICE BOX 655303
µV
0.004%
To 0.1%
0 1%
Gain margin
† Full range is 0°C to 70°C.
‡ Referenced to 2.5 V
nV/√Hz
0.0013%
25°C
AV = 100
CL = 100 pF‡
UNIT
17
1.7
Vn
AV = 1
AV = 10
MAX
• DALLAS, TEXAS 75265
dB
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2272C electrical characteristics at specified free-air temperature, VDD± = ±5 V (unless
otherwise specified)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient of
input offset voltage
Input offset voltage
long-term drift
(see Note 4)
IIO
Input offset current
IIB
Input bias current
VICR
Common-mode input
voltage range
TA†
TEST CONDITIONS
25°C
VO = 0,
0
RS = 50 Ω
Ω,
Large-signal
Large
signal differential
voltage am
lification
amplification
IO = 5
VO = ± 4 V
mA
RL = 10 kΩ
µV
0.002
0.002
µV/mo
25°C
0.5
0.5
100
100
1
1
100
–5
to
4
Full range
g
–5
to
3.5
– 5.3
to
4.2
100
–5
to
4
4.85
Full range
4.85
25°C
4.25
Full range
4.25
25°C
– 4.85
Full range
– 4.85
25°C
– 3.5
Full range
– 3.5
25°C
25
Full range
25
pA
V
4.99
4.93
4.85
4.93
V
4.85
4.65
4.25
4.65
4.25
– 4.99
25°C
pA
– 5.3
to
4.2
–5
to
3.5
4.99
25°C
RL = 1 mΩ
950
1500
UNIT
25°C
25°C
IO = 500 µA
VIC = 0
0,
300
MAX
µV/°C
25°C
IO = 50 µA
TYP
2
|VIO | ≤ 5 mV
IO = – 200 µA
MIN
2
25°C
VIC = 0
0,
AVD
2500
Full range
VIC = 0,
Maximum negative peak
out
ut voltage
output
300
Full range
IO = – 1 mA
VOM –
MAX
3000
25°C
to 70°C
VIC = 0,
0
RS = 50 Ω
TLC2272AC
TYP
Full range
IO = – 20 µA
Maximum positive peak
VOM +
out
ut voltage
output
TLC2272C
MIN
– 4.99
– 4.91
– 4.85
– 4.91
V
– 4.85
– 4.1
– 3.5
– 4.1
– 3.5
50
25
50
V/mV
25
25°C
300
300
rid
Differential input
resistance
25°C
1012
1012
Ω
ri
Common-mode input
resistance
25°C
1012
1012
Ω
ci
Common-mode input
capacitance
f = 10 kHz,
P package
25°C
8
8
pF
zo
Closed-loop output
impedance
f = 1 MHz,
AV = 10
25°C
130
130
Ω
CMRR
Common-mode rejection
j
ratio
VIC = – 5 to 2.7 V,,
VO = 0 V,
RS = 50 Ω
25°C
75
Full range
75
kSVR
Supply-voltage
y
g rejection
j
ratio (∆VDD ± /∆VIO)
VDD ± = 2.2 V to ± 8 V,
VIC = 0,
No load
25°C
80
Full range
80
IDD
Supply current
VO = 0 V
No load
25°C
Full range
80
75
80
dB
75
95
80
95
dB
80
2.4
3
3
2.4
3
3
mA
† Full range is 0°C to 70°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2272C operating characteristics at specified free-air temperature, VDD± = ±5 V
PARAMETER
TEST CONDITIONS
TA†
TLC2272C
MIN
TYP
25°C
2.3
3.6
Full
range
17
1.7
TLC2272AC
MAX
MIN
TYP
2.3
3.6
SR
Slew rate at
unity gain
VO = ± 2.3
23V
V,
CL = 100 pF
F
Vn
Equivalent
input
q
noise voltage
f = 10 Hz
25°C
50
50
f = 1 kHz
25°C
9
9
Peak-to-peak
equivalent input
noise voltage
f = 0.1 Hz to 1 Hz
25°C
1
1
VNPP
f = 0.1 Hz to 10 Hz
25°C
1.4
1.4
In
Equivalent input
noise current
25°C
0.6
0.6
THD + N
Total harmonic
distortion pulse
duration
VO = ± 2.3 V,
f = 20 kHz,
RL = 10 kΩ
AV = 1
AV = 10
Gain-bandwidth
product
f = 10 kHz,,
CL = 100 pF
RL = 10 kΩ,,
Maximum outputswing bandwidth
VO(PP) = 4.6 V,,
RL = 10 kΩ,
AV = 1,,
CL = 100 pF
Settling time
AV = – 1,
Step = – 2.3 V to 2.3 V,,
RL = 10 kΩ,
CL = 100 pF
BOM
ts
φm
Phase margin at
unity gain
RL = 10 kΩ,
RL = 10 kΩ,
kΩ
8
µV
fA/√Hz
0.0011%
0.004%
0.004%
0.03%
0.03%
25°C
2 25
2.25
2 25
2.25
MHz
25°C
0 54
0.54
0 54
0.54
MHz
15
1.5
15
1.5
32
3.2
32
3.2
25°C
52°
52°
25°C
10
10
µs
25°C
01%
To 0
0.01%
POST OFFICE BOX 655303
nV/√Hz
0.0011%
25°C
To 0.1%
0 1%
Gain margin
† Full range is 0°C to 70°C.
UNIT
V/µs
17
1.7
AV = 100
CL = 100 pF
MAX
• DALLAS, TEXAS 75265
dB
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2274C electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise
noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
Input offset voltage
long-term drift
(see Note 4)
IIO
Input offset current
IIB
Input bias current
VICR
Common-mode input
voltage range
TA†
TEST CONDITIONS
25°C
High-level
High
level output
voltage
VIC = 0,
RS = 50 Ω
Low-level
Low
level output
voltage
Large-signal
Large
signal differential
amplification
voltage am
lification
2500
VIC = 2.5 V,
VIC = 2.5 V,
IOL = 500 µA
VIC = 2
2.5
5V
V,
VO = 1 V to 4 V
mA
µV
0.002
0.002
µV/mo
25°C
0.5
0.5
100
100
1
1
100
25°C
0
to
4
Full range
0
to
3.5
– 0.3
to
4.2
100
0
to
4
4.99
25°C
4.85
Full range
4.85
25°C
4.25
Full range
4.25
– 0.3
to
4.2
pA
4.99
4.93
4.85
4.93
V
4.85
4.65
4.25
4.65
4.25
25°C
0.01
25°C
0.09
0.01
0.15
0.09
0.15
25°C
pA
V
0
to
3.5
Full range
IOL = 5
950
1500
UNIT
25°C
25°C
IOL = 50 µA
300
MAX
µV/°C
VIO ≤ 5 m V
V,
IOH = – 200 µA
TYP
2
25°C
RS = 50Ω
50Ω,
MIN
2
Full range
VIC = 2
2.5
5V
V,
AVD
300
Full range
IOH = – 1 mA
VOL
MAX
3000
25°C
to 70°C
VDD ± = ± 2.5 V,
VO = 0,
TLC2274AC
TYP
Full range
IOH = – 20 µA
VOH
TLC2274C
MIN
0.9
Full range
0.15
1.5
0.9
1.5
35
0.15
V
1.5
1.5
RL = 10 kΩ‡
25°C
15
15
35
Full range
15
RL = 1 mΩ‡
25°C
175
175
15
V/mV
rid
Differential input
resistance
25°C
1012
1012
Ω
ri
Common-mode input
resistance
25°C
1012
1012
Ω
ci
Common-mode input
capacitance
f = 10 kHz,
N package
25°C
8
8
pF
zo
Closed-loop output
impedance
f = 1 MHz,
AV = 10
25°C
140
140
Ω
CMRR
Common-mode
rejection ratio
VIC = 0 to 2.7 V,
VO = 2.5 V,
RS = 50Ω
25°C
70
Full range
70
kSVR
Supply-voltage
y
g rejection
j
ratio (∆VDD /∆VIO)
VDD = 4.4 V to 16 V,
VIC = VDD /2,
No load
25°C
80
Full range
80
IDD
Supply current
VO = 2.5
25V
V,
No load
25°C
Full range
75
70
75
dB
70
95
80
95
dB
80
4.4
6
6
4.4
6
6
mA
† Full range is 0°C to 70°C.
‡ Referenced to 2.5 V
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2274C operating characteristics at specified free-air temperature, VDD = 5 V
PARAMETER
TEST CONDITIONS
TA†
TLC2274C
MIN
TYP
25°C
2.3
3.6
Full
range
17
1.7
TLC2274AC
MAX
MIN
TYP
2.3
3.6
SR
Slew rate at
unity gain
VO = 0
0.5
5 V to 2
2.5
5V
V,
RL = 10 kΩ‡,
Vn
Equivalent
input
q
noise voltage
f = 10 Hz
25°C
50
50
f = 1 kHz
25°C
9
9
Peak-to-peak
equivalent input
noise voltage
f = 0.1 to 1 Hz
25°C
1
1
VN(PP)
f = 0.1 to 10 Hz
25°C
1.4
1.4
In
Equivalent input
noise current
25°C
0.6
0.6
THD + N
Total harmonic
distortion plus
noise
VO = 0.5 V to 2.5 V,
f = 20 kHz,
RL = 10 kΩ‡
AV = 1
AV = 10
Gain-bandwidth
product
f = 10 kHz,
CL = 100 pF‡
RL = 10 kΩ‡,
Maximum
output-swing
bandwidth
VO(PP) = 2 V,
RL = 10 kΩ‡,
AV = 1,
CL = 100 pF‡
1%
To 0
0.1%
Settling time
AV = – 1,
Step = 0.5 V to 2.5 V,,
RL = 10 kΩ‡,
CL = 100 pF‡
RL = 10 kΩ‡,
CL = 100 pF‡
BOM
ts
φm
Phase margin at
unity gain
CL = 100 pF
F‡
10
nV/√Hz
µV
fA /√Hz
0.0013%
0.0013%
0.004%
0.004%
0.03%
0.03%
25°C
2.18
2.18
MHz
25°C
1
1
MHz
15
1.5
15
1.5
26
2.6
26
2.6
25°C
50°
50°
25°C
10
10
25°C
µs
25°C
To 0
0.01%
01%
POST OFFICE BOX 655303
UNIT
V/µs
17
1.7
AV = 100
Gain margin
† Full range is 0°C to 70°C.
‡ Referenced to 2.5 V
MAX
• DALLAS, TEXAS 75265
dB
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2274C electrical characteristics at specified free-air temperature, VDD± = ±5 V (unless
otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient of input
offset voltage
Input offset voltage long-term
drift (see Note 4)
IIO
Input offset current
IIB
Input bias current
VICR
Common-mode input
voltage range
TEST CONDITIONS
300
2500
VO = 0,
VIC = 0
0,
VIC = 0
0,
25°C
0.5
0.5
100
Full range
–5
to
3.5
25°C
4.85
4.85
25°C
4.25
Full range
4.25
25°C
– 4.8
5
Full range
– 4.8
5
25°C
– 3.5
Full range
– 3.5
25°C
25
Full range
25
ri
Common-mode input resistance
ci
Common-mode input
capacitance
f = 10 kHz,
zo
Closed-loop output impedance
f = 1 MHz,
–5
to
4
25°C
– 5.3
to
4.2
pA
pA
V
–5
to
3.5
4.99
4.93
4.85
4.93
4.85
4.65
4.25
V
4.65
4.25
– 4.9
9
25°C
25°C
– 5.3
to
4.2
100
4.99
Full range
Differential input resistance
1
100
–5
to
4
rid
100
1
25°C
Large-signal
Large
signal differential voltage
am
lification
amplification
RL = 1 MΩ
µV
µV/mo
IO = 500 µA
RL = 10 kΩ
1500
0.002
AVD
VO = ± 4 V
950
0.002
25°C
IO = – 5 mA
300
UNIT
25°C
|VIO | ≤ 5 mV
IO = 50 µA
MAX
µV/°C
25°C
IO = – 200 µA
TYP
2
Full range
RS = 50 Ω
Ω,
MIN
2
Full range
VIC = 0,
Maximum negative peak
eak out
output
ut
voltage
MAX
3000
25°C
to 70°C
VIC = 0,
RS = 50 Ω
TLC2274AC
TYP
Full range
IO = – 1 mA
VOM –
TLC2274C
MIN
25°C
IO = – 20 µA
Maximum positive peak output
VOM +
voltage
TA†
– 4.9
9
– 4.9
1
– 4.8
5
– 4.9
1
V
– 4.8
5
– 4.1
– 3.5
– 4.1
– 3.5
50
25
50
25
V/mV
300
1012
1012
Ω
25°C
300
1012
1012
N package
25°C
8
8
pF
AV = 10
25°C
130
Ω
130
CMRR Common-mode
Common mode rejection ratio
VIC = – 5 V to 2.7 V,
VO = 0,
RS = 50 Ω
25°C
75
Full range
75
kSVR
Supply-voltage
y
g rejection
j
ratio
(∆VDD ± /∆VIO)
VDD ± = ± 2.2 V to ± 8 V,
VIC = 0,
No load
25°C
80
Full range
80
IDD
Supply current
VO = 0
0,
No load
25°C
Full range
80
75
Ω
80
dB
75
95
80
95
dB
80
4.8
6
6
4.8
6
6
mA
† Full range is 0°C to 70°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
11
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2274C operating characteristics at specified free-air temperature, VDD± = ±5 V
PARAMETER
TEST CONDITIONS
TLC2274C
TA†
MIN
TYP
25°C
2.3
3.6
Full
range
17
1.7
TLC2274AC
MAX
MIN
TYP
2.3
3.6
SR
Slew rate at unity
gain
VO = ± 2
2.3
3V
V,
CL = 100 pF
F
Vn
Equivalent
input
q
noise voltage
f = 10 Hz
25°C
50
50
f = 1 Hz
25°C
9
9
Peak-to-peak
equivalent input
noise voltage
f = 0.1 Hz to 1 Hz
25°C
1
1
VN(PP)
f = 0.1 Hz to 10 Hz
25°C
1.4
1.4
In
Equivalent input
noise current
25°C
0.6
0.6
THD + N
Total harmonic
distortion plus
noise
VO = ± 2.3 V,
f = 20 kHz,
RL = 10 kΩ
Gain-bandwidth
product
f = 10 kHz,,
CL = 100 pF
RL= 10 kΩ,,
Maximum
output swing
output-swing
bandwidth
VO(PP) = 4.6 V,
RL = 10 kΩ,
AV = 1,
CL = 100 pF
Settling time
AV = – 1,
Step = – 2.3 V to 2.3 V,,
RL = 10 kΩ,
CL = 100 pF
BOM
ts
φm
Phase margin at
unity gain
RL = 10 kΩ,
RL = 10 kΩ,
kΩ
AV = 1
AV = 10
12
µV
fA /√Hz
0.0011%
0.004%
0.004%
0.03%
0.03%
25°C
2 25
2.25
2 25
2.25
MHz
25°C
0 54
0.54
0 54
0.54
MHz
15
1.5
15
1.5
32
3.2
32
3.2
25°C
52°
52°
25°C
10
10
µs
25°C
To 0.01%
0 01%
POST OFFICE BOX 655303
nV/√Hz
0.0011%
25°C
0 1%
To 0.1%
Gain margin
† Full range is 0°C to 70°C.
UNIT
V/µs
17
1.7
AV = 100
CL = 100 pF
MAX
• DALLAS, TEXAS 75265
dB
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2272I electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise
noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
Input offset voltage
long-term drift
(see Note 4)
IIO
Input offset current
IIB
Input bias current
VICR
Common-mode input
voltage range
TA†
TEST CONDITIONS
25°C
VDD ± = ± 2.5V
2 5V
V
RS = 50 Ω
VIC = 0
0,
VO = 0,
High
level output
High-level
voltage
Large-signal
Large
signal differential
voltage am
lification
amplification
25°C
to 85°C
VIC = 2
2.5
5V
V,
IOL = 500 µA
IOL = 5
mA
RL = 10 kΩ‡
VIC = 2
2.5
5V
V,
VO = 1 V to 4 V
RL = 1 mΩ‡
300
MAX
950
1500
UNIT
µV
2
µV/°C
25°C
0.002
0.002
µV/mo
25°C
0.5
0.5
150
150
1
1
150
25°C
0
to
4
Full range
g
0
to
3.5
25°C
IOL = 50 µA
TYP
2
|VIO | ≤ 5 mV
IOH = – 200 µA
5V
VIC = 2
2.5
V,
AVD
2500
MIN
3000
25°C
VIC = 2.5 V,
Low-level
Low
level output
voltage
300
Full range
IOH = – 1 mA
VOL
MAX
Full range
RS = 50 Ω,
TLC2272AI
TYP
Full range
IOH = – 20 µA
VOH
TLC2272I
MIN
– 0.3
to
4.2
150
0
to
4
4.85
Full range
4.85
25°C
4.25
Full range
4.25
V
4.99
4.93
4.85
4.93
V
4.85
4.65
4.25
4.65
4.25
25°C
0.01
25°C
0.09
Full range
0.01
0.15
0.09
0.15
25°C
0.9
Full range
15
Full range
15
35
0.15
0.15
1.5
0.9
1.5
25°C
pA
– 0.3
to
4.2
0
to
3.5
4.99
25°C
pA
V
1.5
1.5
15
35
15
V/mV
25°C
175
175
rid
Differential input
resistance
25°C
1012
1012
Ω
ri
Common-mode input
resistance
25°C
1012
1012
Ω
ci
Common-mode input
capacitance
f = 10 kHz,
P package
25°C
8
8
pF
zo
Closed-loop output
impedance
f = 1 MHz,
AV = 10
25°C
140
140
Ω
CMRR
Common-mode
rejection ratio
VIC = 0 to 2.7 V,
VO = 2.5 V,
RS = 50 Ω
25°C
70
Full range
70
kSVR
Supply-voltage
y
g rejection
j
ratio (∆VDD /∆VIO)
VDD = 4.4 V to 16 V,
VIC = VDD /2,
No load
25°C
80
Full range
80
IDD
Supply current
2 5 V,
V
VO = 2.5
No load
25°C
Full range
75
70
75
dB
70
95
80
95
dB
80
2.2
3
3
2.2
3
3
mA
† Full range is – 40°C to 85°C.
‡ Referenced to 2.5 V
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
13
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2272I operating characteristics at specified free-air temperature, VDD = 5 V
PARAMETER
TEST CONDITIONS
TA†
TLC2272I
MIN
TYP
25°C
2.3
3.6
Full
range
17
1.7
TLC2272AI
MAX
MIN
TYP
2.3
3.6
MAX
UNIT
SR
Slew rate at
unity gain
VO = 0
0.5
5 V to 2
2.5
5V
V,
RL = 10 kΩ‡,
Vn
Equivalent
input
q
noise voltage
f = 10 Hz
25°C
50
50
f = 1 kHz
25°C
9
9
Peak-to-peak
equivalent input
noise voltage
f = 0.1 Hz to 1 Hz
25°C
1
1
VNPP
f = 0.1 Hz to 10 Hz
25°C
1.4
1.4
In
Equivalent input
noise current
25°C
0.6
0.6
Total harmonic
distortion plus
noise
VO = 0.5 V to 2.5 V,
f = 20 kHz,
RL = 10 kΩ‡
0.0013%
0.0013%
THD + N
0.004%
0.004%
0.03%
0.03%
Gain-bandwidth
product
f = 10 kHz,,
CL = 100 pF‡
25°C
2 18
2.18
2 18
2.18
MHz
BOM
Maximum outputswing bandwidth
VO(PP) = 2 V,,
RL = 10 kΩ‡,
25°C
1
1
MHz
15
1.5
Settling time
AV = – 1
1,
Step = 0.5 V to 2.5 V,
Ste
RL = 10 kΩ‡,
CL = 100 pF‡
15
1.5
ts
26
2.6
26
2.6
25°C
50°
50°
25°C
10
10
φm
Phase margin at
unity gain
RL = 10 kΩ‡,
CL = 100 pF
F‡
AV = 1
AV = 10
AV = 100
RL = 10 kΩ‡,
AV = 1,,
CL = 100 pF‡
To 0.1%
0 1%
To
0.01%
CL = 100 pF‡
Gain margin
† Full range is – 40°C to 85°C.
‡ Referenced to 2.5 V
14
25°C
POST OFFICE BOX 655303
V/µs
17
1.7
µV
fA√Hz
µss
25°C
• DALLAS, TEXAS 75265
nV√Hz
dB
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2272I electrical characteristics at specified free-air temperature, VDD± = ±5 V (unless otherwise
noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
Input offset voltage
long-term drift
(see Note 4)
IIO
Input offset current
IIB
Input bias current
VICR
Common-mode input
voltage range
TA†
TEST CONDITIONS
25°C
VO = 0,
0
2500
VIC = 0,
0
VIC = 0,
0
IO = 5
mA
µV
0.002
0.002
µV/mo
25°C
0.5
0.5
150
150
1
1
150
–5
to
4
Full range
–5
to
3.5
– 5.3
to
4.2
150
–5
to
4
4.99
25°C
4.85
Full range
4.85
25°C
4.25
Full range
4.25
25°C
– 4.85
Full range
– 4.85
25°C
– 3.5
Full range
– 3.5
25°C
25
Full range
25
pA
pA
V
4.99
4.93
4.85
4.93
V
4.85
4.65
4.25
4.65
4.25
– 4.99
25°C
– 5.3
to
4.2
–5
to
3.5
25°C
IO = 500 µA
950
1500
UNIT
25°C
25°C
IO = 50 µA
300
MAX
µV/°C
|VIO | ≤ 5 mV
IO = – 200 µA
TYP
2
25°C
RS = 50 Ω,
Ω
MIN
2
Full range
VIC = 0,
Maximum negative
peak
eak out
output
ut voltage
300
Full range
IO = – 1 mA
VOM –
MAX
3000
25°C
to 85°C
VIC = 0,
0
RS = 50 Ω
TLC2272AI
TYP
Full range
IO = – 20 µA
Maximum positive peak
VOM +
out
ut voltage
output
TLC2272I
MIN
– 4.99
– 4.91
– 4.85
– 4.91
V
– 4.85
– 4.1
– 3.5
– 4.1
– 3.5
50
25
50
AVD
Large signal
Large-signal
differential voltage
amplification
25°C
300
300
rid
Differential input
resistance
25°C
1012
1012
Ω
ri
Common-mode input
resistance
25°C
1012
1012
Ω
ci
Common-mode input
capacitance
f = 10 kHz,
P package
25°C
8
8
pF
zo
Closed-loop output
impedance
f = 1 MHz,
AV = 10
25°C
130
130
Ω
CMRR
Common-mode
rejection ratio
VIC = 0 to 2.7 V,,
VO = 2.5 V,
RS = 50 Ω
kSVR
Supply-voltage
rejection ratio
(∆VDD ± /∆VIO)
VDD = 4.4 V to 16 V,,
VIC = VDD /2,
No load
IDD
Supply current
VO = 2.5
2 5 V,
V
VO = ± 4 V
RL = 10 kΩ
RL = 1 mΩ
No load
25°C
75
Full range
75
25°C
80
Full range
80
V/mV
25
80
75
80
dB
75
95
80
95
dB
25°C
Full range
80
2.4
3
3
2.4
3
3
mA
† Full range is – 40°C to 85°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
15
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2272I operating characteristics at specified free-air temperature, VDD ± = ±5 V
PARAMETER
TEST CONDITIONS
TA†
TLC2272I
MIN
TYP
25°C
2.3
3.6
Full
range
17
1.7
TLC2272AI
MAX
MIN
TYP
2.3
3.6
Slew rate at
unityy g
gain
VO = ± 2.3
23V
V,
CL = 100 pF
F
Vn
Equivalent
q
input
noise voltage
f = 10 Hz
25°C
50
50
f = 1 kHz
25°C
9
9
Peak-to-peak
equivalent input
noise voltage
f = 0.1 Hz to 1 Hz
25°C
1
1
VNPP
f = 0.1 Hz to 10 Hz
25°C
1.4
1.4
In
Equivalent input
noise current
25°C
0.6
0.6
THD + N
Total harmonic
distortion plus
noise
VO = ± 2.3 V
RL = 10 kΩ,
f = 20 kHz
AV = 1
AV = 10
Gain-bandwidth
product
f =10 kHz,,
CL = 100 pF
RL = 10 kΩ,,
Maximum
output swing
output-swing
bandwidth
VO(PP) = 4.6 V,,
RL = 10 kΩ,
AV = 1,,
CL = 100 pF
Settling time
AV = – 1,
Step = – 2.3 V to 2.3 V,,
RL = 10 kΩ,
CL = 100 pF
SR
BOM
ts
φm
Phase margin at
unity gain
RL = 10 kΩ,
RL = 10 kΩ,
kΩ
16
V/µs
µV
fA√Hz
0.0011%
0.004%
0.004%
0.03%
0.03%
25°C
2 25
2.25
2 25
2.25
MHz
25°C
0 54
0.54
0 54
0.54
MHz
15
1.5
15
1.5
32
3.2
32
3.2
25°C
52°
52°
25°C
10
10
µs
25°C
To 0
0.01%
01%
POST OFFICE BOX 655303
nV√Hz
0.0011%
25°C
To 0.1%
0 1%
Gain margin
† Full range is – 40°C to 85°C.
UNIT
17
1.7
AV = 100
CL = 100 pF
MAX
• DALLAS, TEXAS 75265
dB
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2274I electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise
noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient of
input offset voltage
Input offset voltage
long-term drift (see Note 4)
IIO
Input offset current
IIB
Input bias current
VICR
Common-mode input
voltage range
TA†
TEST CONDITIONS
25°C
High-level output voltage
VIC = 0,
RS = 50 Ω
Low-level output voltage
L
i
l diff
ti l
Large-signal
differential
voltage am
lification
amplification
2500
IOL = 50 µA
VIC = 2
2.5
5V
V,
IOL = 500 µA
2 5 V,
V
VIC = 2.5
VO = 1 V to 4 V
IOL = 5
mA
RL = 10 kΩ‡
RL = 1 MΩ‡
300
950
1500
UNIT
µV
25°C
0.002
0.002
µV/mo
25°C
0.5
0.5
150
150
1
1
150
25°C
0
to
4
Full range
0
to
3.5
25°C
VIC = 2.5 V,
MAX
µV/°C
|VIO | ≤ 5 mV
IOH = – 200 µA
TYP
2
25°C
RS = 50 Ω
Ω,
MIN
2
Full range
VIC = 2
2.5
5V
V,
AVD
300
Full range
IOH = – 1 mA
VOL
MAX
3000
25°C
to 85°C
VDD ± = ± 2.5 V,
VO = 0,
TLC2274AI
TYP
Full range
IOH = – 20 µA
VOH
TLC2274I
MIN
– 0.3
to
4.2
150
0
to
4
25°C
4.85
4.85
25°C
4.25
Full range
4.25
4.99
4.93
4.85
4.93
4.85
4.65
4.25
V
4.65
4.25
25°C
0.01
25°C
0.09
Full range
0.01
0.15
0.09
0.15
25°C
0.9
Full range
15
Full range
15
0.9
V
1.5
1.5
15
35
15
V/mV
rid
Differential input resistance
25°C
175
1012
175
1012
Ω
ri
Common-mode input
resistance
25°C
1012
1012
Ω
ci
Common-mode input
capacitance
f = 10 kHz,
N package
25°C
8
8
pF
zo
Closed-loop output
impedance
f = 1 MHz,
AV = 10
25°C
140
140
Ω
CMRR
Common-mode rejection
j
ratio
VIC = 0 to 2.7 V,
VO = 2.5 V,
RS = 50 Ω
25°C
70
Full range
70
kSVR
Supply-voltage
y
g rejection
j
ratio (∆VDD /∆VIO)
VDD = 4.4 V to 16 V,
VIC = VDD /2,
No load
25°C
80
Full range
80
IDD
Supply current
VO = 2.5
2 5 V,
V
No load
25°C
35
0.15
0.15
1.5
1.5
25°C
pA
V
0
to
3.5
4.99
Full range
– 0.3
to
4.2
pA
25°C
Full range
75
70
75
dB
70
95
80
95
dB
80
4.4
6
6
4.4
6
6
mA
† Full range is – 40°C to 85°C.
‡ Referenced to 2.5 V
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
17
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2274I operating characteristics at specified free-air temperature, VDD = 5 V
PARAMETER
TEST CONDITIONS
TLC2274I
TA†
MIN
TYP
25°C
2.3
3.6
Full
range
17
1.7
TLC2274AI
MAX
MIN
TYP
2.3
3.6
Slew rate at unity
gain
VO = 0
0.5
5 V to 2
2.5
5V
V,
RL = 10 kΩ‡,
CL = 100 pF
F‡
Vn
Equivalent
q
input
noise voltage
f = 10 Hz
25°C
50
50
f = 1 kHz
25°C
9
9
Peak-to-peak
equivalent input
noise voltage
f = 0.1 Hz to 1 Hz
25°C
1
1
VN(PP)
f = 0.1 Hz to 10 Hz
25°C
1.4
1.4
In
Equivalent input
noise current
25°C
0.6
0.6
THD + N
Total
T
t lh
harmonic
i
distortion plus
lus noise
SR
BOM
ts
φm
VO = 0.5 V to 2.5 V,
f = 20 kHz,
RL = 10 kΩ‡
AV = 100
RL = 10 kΩ‡,
Gain-bandwidth
product
f = 10 kHz,,
CL = 100 pF‡
Maximum
output swing
output-swing
bandwidth
VO(PP) = 2 V,
RL = 10 kΩ‡,
Settling time
AV = – 1,
Step = 0.5 V to 2.5 V,,
RL = 10 kΩ‡,
CL = 100 pF‡
Phase margin at
unity gain
RL = 10 kΩ‡,
AV = 1
AV = 10
AV = 1,
CL = 100 pF‡
18
V/µs
µV
fA /√Hz
0.0013%
0.004%
0.004%
0.03%
0.03%
25°C
2 18
2.18
2 18
2.18
MHz
25°C
1
1
MHz
15
1.5
15
1.5
26
2.6
26
2.6
25°C
50°
50°
25°C
10
10
25°C
To 0
0.01%
01%
POST OFFICE BOX 655303
nV/√Hz
0.0013%
µs
25°C
Gain margin
† Full range is – 40°C to 85°C.
‡ Referenced to 2.5 V
UNIT
17
1.7
To 0.1%
0 1%
CL = 100 pF‡
MAX
• DALLAS, TEXAS 75265
dB
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2274I electrical characteristics at specified free-air temperature, VDD± = ±5 V (unless otherwise
noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient of
input offset voltage
Input offset voltage
long-term drift (see Note 4)
IIO
Input offset current
IIB
Input bias current
VICR
Common-mode input
voltage range
TA†
TEST CONDITIONS
25°C
VO = 0,
Maximum negative peak
out
ut voltage
output
300
2500
VIC = 0
0,
IO = 500 µA
VIC = 0
0,
IO = 5
mA
RL = 10 kΩ
950
1500
µV
0.002
0.002
µV/mo
25°C
0.5
0.5
150
150
1
1
150
25°C
–5
to
4
Full range
–5
to
3.5
– 5.3
to
4.2
150
–5
to
4
4.99
25°C
4.85
Full range
4.85
25°C
4.25
Full range
4.25
25°C
25°C
– 4.85
– 4.85
25°C
– 3.5
Full range
– 3.5
25°C
25
Full range
25
pA
pA
V
4.99
4.93
4.85
4.93
4.85
4.65
4.25
V
4.65
4.25
– 4.99
Full range
– 5.3
to
4.2
–5
to
3.5
25°C
IO = 50 µA
300
UNIT
25°C
VIO | ≤ 5 mV
VIC = 0,
MAX
µV/°C
25°C
IO = – 200 µA
TYP
2
Full range
RS = 50 Ω
Ω,
MIN
2
Full range
IO = – 1 mA
VOM –
MAX
3000
25°C
to 85°C
VIC = 0,
RS = 50 Ω
TLC2274AI
TYP
Full range
IO = – 20 µA
Maximum positive peak
VOM +
out
ut voltage
output
TLC2274I
MIN
– 4.99
– 4.91
– 4.85
– 4.91
– 4.85
– 4.1
– 3.5
V
– 4.1
– 3.5
50
25
50
AVD
Large signal differential
Large-signal
voltage am
lification
amplification
rid
Differential input resistance
25°C
300
1012
300
1012
Ω
ri
Common-mode input
resistance
25°C
1012
1012
Ω
ci
Common-mode input
capacitance
f = 10 kHz,
N package
25°C
8
8
pF
zo
Closed-loop output
impedance
f = 1 MHz,
AV = 10
25°C
130
130
Ω
CMRR
Common-mode rejection
j
ratio
VIC = – 5 to 2.7 V,
VO = 0,
RS = 50 Ω
25°C
75
Full range
75
kSVR
Supply-voltage
y
g rejection
j
ratio (∆VDD ± /∆VIO)
VDD ± = ± 2.2 V to ± 8 V,
VIC = 0,
No load
25°C
80
Full range
80
IDD
Supply current
VO = 0
0,
VO = ± 4 V
RL = 1 MΩ
No load
25°C
25
25°C
Full range
80
75
V/mV
80
dB
75
95
80
95
dB
80
4.8
6
6
4.8
6
6
mA
† Full range is – 40°C to 85°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
19
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2274I operating characteristics at specified free-air temperature, VDD ± = ±5 V
PARAMETER
TEST CONDITIONS
TLC2274I
TA†
MIN
TYP
25°C
2.3
3.6
Full
range
17
1.7
TLC2274AI
MAX
MIN
TYP
2.3
3.6
SR
Slew rate at unity
gain
VO = ± 2
2.3
3V
V,
CL = 100 pF
F
Vn
Equivalent
input
q
noise voltage
f = 10 Hz
25°C
50
50
f = 1 kHz
25°C
9
9
Peak-to-peak
equivalent input
noise voltage
f = 0.1 Hz to 1 Hz
25°C
1
1
VN(PP)
f = 0.1 Hz to 10 Hz
25°C
1.4
1.4
In
Equivalent input
noise current
25°C
0.6
0.6
THD + N
Total harmonic
distortion plus
noise
VO = ± 2.3 V,
RL = 10 kΩ,
f = 20 kHz
AV = 1
AV = 10
Gain-bandwidth
product
f = 10 kHz,,
CL = 100 pF
RL = 10 kΩ,,
BOM
Maximum outputswing bandwidth
VO(PP) = 4.6 V,
RL = 10 kΩ,
AV = 1,
CL = 100 pF
ts
Settling time
AV = – 1,
Step = – 2.3 V to 2.3 V,,
RL = 10 kΩ,
CL = 100 pF
φm
Phase margin at
unity gain
RL = 10 kΩ,
RL = 10 kΩ,
kΩ
20
µV
fA/√Hz
0.0011%
0.004%
0.004%
0.03%
0.03%
25°C
2 25
2.25
2 25
2.25
MHz
25°C
0 54
0.54
0 54
0.54
MHz
15
1.5
15
1.5
32
3.2
32
3.2
25°C
52°
52°
25°C
10
10
µs
25°C
01%
To 0
0.01%
POST OFFICE BOX 655303
nV/√Hz
0.0011%
25°C
To 0.1%
0 1%
Gain margin
† Full range is – 40°C to 85°C.
UNIT
V/µs
17
1.7
AV = 100
CL = 100 pF
MAX
• DALLAS, TEXAS 75265
dB
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2272Q and TLC2272M electrical characteristics at specified free-air temperature, VDD = 5 V
(unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLC2272Q,
TLC2272M
MIN
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
Input offset voltage longterm drift (see Note 4)
IIO
Input offset current
IIB
Input bias current
VICR
Common-mode input
voltage range
25°C
High-level
High
level output
voltage
VDD ± = ± 2.5 V,
RS = 50 Ω
Low-level output voltage
Large-signal
Large
signal
differential voltage
amplification
2500
IOL = 50 µA
VIC = 2
2.5
5V
V,
IOL = 500 µA
IOL = 5
mA
RL = 10 kΩ‡
VIC = 2
2.5
5V
V,
VO = 1 V to 4 V
RL = 1 mΩ‡
950
1500
µV
25°C
0.002
0.002
µV/mo
25°C
0.5
0.5
500
500
1
1
500
25°C
0
to
4
Full range
0
to
3.5
25°C
VIC = 2.5 V,
300
UNIT
MAX
µV/°C
|VIO | ≤ 5 mV
IOH = – 200 µA
TYP
2
25°C
RS = 50 Ω
Ω,
MIN
2
Full range
5V
VIC = 2
2.5
V,
AVD
300
Full range
IOH = – 1 mA
VOL
MAX
3000
25°C
to 125°C
IOH = – 20 µA
VOH
TYP
Full range
VIC = 0,
VO = 0,
TLC2272AQ,
TLC2272AM
– 0.3
to
4.2
500
0
to
4
4.85
Full range
4.85
25°C
4.25
Full range
4.25
4.99
4.93
4.85
4.93
V
4.85
4.65
4.25
4.65
4.25
25°C
0.01
25°C
0.09
Full range
0.01
0.15
0.09
0.15
25°C
0.9
Full range
10
Full range
10
35
0.15
0.15
1.5
0.9
1.5
25°C
pA
V
0
to
3.5
4.99
25°C
– 0.3
to
4.2
pA
V
1.5
1.5
10
35
10
V/mV
25°C
175
175
rid
Differential input
resistance
25°C
1012
1012
Ω
ri
Common-mode input
resistance
25°C
1012
1012
Ω
ci
Common-mode input
capacitance
f = 10 kHz,
P package
25°C
8
8
pF
zo
Closed-loop output
impedance
f = 1 MHz,
AV = 10
25°C
140
140
Ω
CMRR
Common-mode rejection
j
ratio
VIC = 0 to 2.7 V,
VO = 2.5 V,
RS = 50 Ω
kSVR
Supply-voltage
y
g rejection
j
ratio (∆VDD /∆VIO)
VDD = 4.4 V to 16 V,
VIC = VDD /2,
No load
IDD
Supply current
VO = 2
2.5
5V
V,
No load
25°C
70
Full range
70
25°C
80
Full range
80
25°C
Full range
75
70
75
dB
70
95
80
95
dB
80
2.2
3
3
2.2
3
3
mA
† Full range is – 40°C to 125°C for Q level part, – 55°C to 125°C for M level part.
‡ Referenced to 2.5 V
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
21
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2272Q and TLC2272M operating characteristics at specified free-air temperature, VDD = 5 V
PARAMETER
TEST CONDITIONS
TLC2272Q,
TLC2272M
TA†
MIN
TYP
25°C
2.3
3.6
Full
range
17
1.7
TLC2272AQ,
TLC2272AM
MAX
MIN
TYP
2.3
3.6
SR
Slew rate at
unity gain
VO = 1
1.25
25 V to 2
2.75
75 V
V,
RL = 10 kΩ‡,
CL = 100 pF
F‡
Vn
Equivalent
q
input
noise voltage
f = 10 Hz
25°C
50
50
f = 1 kHz
25°C
9
9
Peak-to-peak
equivalent input
noise voltage
f = 0.1 Hz to 1 Hz
25°C
1
1
VNPP
f = 0.1 Hz to 10 Hz
25°C
1.4
1.4
In
Equivalent input
noise current
25°C
0.6
0.6
THD + N
Total harmonic
distortion plus
noise
VO = 0.5 V to 2.5 V,
f = 20 kHz,
RL = 10 kΩ‡,
Gain-bandwidth
product
f =10 kHz,,
CL = 100 pF‡
Maximum outputswing bandwidth
VO(PP) = 2 V,,
RL = 10 kΩ‡,
Settling time
AV = – 1,
Step = 0.5 V to 2.5 V,,
RL = 10 kΩ‡,
CL = 100 pF‡
BOM
ts
φm
Phase margin at
unity gain
RL = 10 kΩ‡,
AV = 1
AV = 10
AV = 100
RL = 10 kΩ‡,
AV = 1,,
CL = 100 pF‡
µV
fA/√Hz
0.0013%
0.004%
0.004%
0.03%
0.03%
25°C
2 18
2.18
2 18
2.18
MHz
25°C
1
1
MHz
15
1.5
15
1.5
26
2.6
26
2.6
50°
50°
10
10
µs
25°C
To 0.01%
0 01%
POST OFFICE BOX 655303
nV/√Hz
0.0013%
25°C
25°C
Gain margin
25°C
† Full range is – 40°C to 125°C for Q level part, – 55°C to 125°C for M level part.
‡ Referenced to 2.5 V
22
V/µs
17
1.7
To 0.1%
0 1%
CL = 100 pF‡
UNIT
MAX
• DALLAS, TEXAS 75265
dB
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2272Q and TLC2272M electrical characteristics at specified free-air temperature, VDD± = ±5 V
(unless otherwise noted)
PARAMETER
TA†
TEST CONDITIONS
TLC2272Q,
TLC2272M
MIN
VIO
Input offset voltage
αVIO
Temperature coefficient of
input offset voltage
Input offset voltage
long-term drift
(see Note 4)
IIO
Input offset current
IIB
Input bias current
VICR
Common-mode input
voltage range
25°C
VO = 0,
2500
VIC = 0
0,
IO = 5
mA
RL = 10 kΩ
µV
0.002
0.002
µV/mo
25°C
0.5
0.5
500
500
1
1
500
–5
to
4
Full range
g
–5
to
3.5
– 5.3
to
4.2
500
–5
to
4
4.99
25°C
4.85
Full range
4.85
25°C
4.25
Full range
4.25
25°C
– 4.85
Full range
– 4.85
25°C
– 3.5
Full range
– 3.5
25°C
20
Full range
20
pA
V
4.99
4.93
4.85
4.93
V
4.85
4.65
4.25
4.65
4.25
– 4.99
25°C
pA
– 5.3
to
4.2
–5
to
3.5
25°C
IO = 500 µA
VIC = 0
0,
950
1500
25°C
25°C
IO = 50 µA
300
UNIT
MAX
µV/°C
|VIO | ≤ 5 mV
IO = – 200 µA
TYP
2
25°C
RS = 50 Ω
Ω,
MIN
2
Full range
VIC = 0,
Maximum negative peak
output
out
ut voltage
300
Full range
IO = – 1 mA
VOM –
MAX
3000
25°C
to 125°C
IO = – 20 µA
Maximum positive peak
VOM +
out
ut voltage
output
TYP
Full range
VIC = 0,
RS = 50 Ω
TLC2272AQ,
TLC2272AM
– 4.99
– 4.91
– 4.85
– 4.91
V
– 4.85
– 4.1
– 3.5
– 4.1
– 3.5
50
20
50
AVD
Large-signal
Large
signal differential
amplification
voltage am
lification
rid
Differential input resistance
25°C
300
1012
300
1012
Ω
ri
Common-mode input
resistance
25°C
1012
1012
Ω
ci
Common-mode input
capacitance
f = 10 kHz,
P package
25°C
8
8
pF
zo
Closed-loop output
impedance
f = 1 MHz,
AV = 10
25°C
130
130
Ω
CMRR
Common-mode rejection
j
ratio
VIC = – 5 to 2.7 V,
VO = 0 V,
RS = 50 Ω
25°C
75
Full range
75
kSVR
Supply-voltage
y
g rejection
j
ratio (∆VDD ± /∆VIO)
VDD = ± 2.2 V to ± 8 V,
VIC = 0,
No load
25°C
80
Full range
80
IDD
Supply current
5V
VO = 2
2.5
V,
VO = ± 4 V
RL = 1 mΩ
No load
25°C
25°C
Full range
V/mV
20
80
75
80
dB
75
95
80
95
dB
80
2.4
3
3
2.4
3
3
mA
† Full range is – 40°C to 125°C for Q level part, – 55°C to 125°C for M level part.
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
23
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2272Q and TLC2272M operating characteristics at specified free-air temperature,
VDD± = ±5 V
PARAMETER
TEST CONDITIONS
TLC2272Q,
TLC2272M
TA†
MIN
TYP
25°C
2.3
3.6
Full
range
17
1.7
TLC2272AQ,
TLC2272AM
MAX
MIN
TYP
2.3
3.6
SR
Slew rate at
unity gain
VO = ± 1 V
V,
CL = 100 pF
F
Vn
Equivalent
q
input
noise voltage
f = 10 Hz
25°C
50
50
f = 1 kHz
25°C
9
9
Peak-to-peak
equivalent input
noise voltage
f = 0.1 Hz to 1 Hz
25°C
1
1
VNPP
f = 0.1 Hz to 10 Hz
25°C
1.4
1.4
In
Equivalent input
noise current
25°C
0.6
0.6
THD + N
Total harmonic
distortion plus
noise
VO = ± 2.3 V
RL = 10 kΩ,
f = 20 kHz
AV = 1
AV = 10
Gain-bandwidth
product
f =10 kHz,,
CL = 100 pF
RL = 10 kΩ,,
BOM
Maximum
output swing
output-swing
bandwidth
VO(PP) = 4.6 V,,
RL = 10 kΩ,
AV = 1,,
CL = 100 pF
Settling time
AV = – 1,
Step = – 2.3 V to 2.3 V,,
RL = 10 kΩ,
CL = 100 pF
To 0.1%
0 1%
ts
RL = 10 kΩ,
CL = 100 pF
φm
Phase margin at
unity gain
RL = 10 kΩ,
kΩ
V/µs
17
1.7
µV
fA/√Hz
0.0011%
0.004%
0.004%
0.03%
0.03%
25°C
2 25
2.25
2 25
2.25
MHz
25°C
0 54
0.54
0 54
0.54
MHz
15
1.5
15
1.5
32
3.2
32
3.2
52°
52°
10
10
25°C
AV = 100
µs
25°C
To 0.01%
0 01%
POST OFFICE BOX 655303
nV/√Hz
0.0011%
25°C
Gain margin
25°C
† Full range is – 40°C to 125°C for Q level part, – 55°C to 125°C for M level part.
24
UNIT
MAX
• DALLAS, TEXAS 75265
dB
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2274Q and TLC2274M electrical characteristics at specified free-air temperature, VDD = 5 V
(unless otherwise noted)
PARAMETER
TA†
TEST CONDITIONS
TLC2274Q,
TLC2274M
MIN
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
Input offset voltage
long-term drift
(see Note 4)
IIO
Input offset current
IIB
Input bias current
VICR
Common-mode input
voltage range
25°C
High-level
High
level output
voltage
VIC = 0,
RS = 50 Ω
Low-level
Low
level output
voltage
Large-signal
Large
signal differential
amplification
voltage am
lification
2500
VIC = 2.5 V,
VIC = 2.5 V,
IOL = 500 µA
0.002
µV/mo
25°C
0.5
0.5
500
VIC = 2
2.5
5V
V,
VO = 1 V to 4 V
500
1
1
500
0
to
4
Full range
g
0
to
3.5
– 0.3
to
4.2
500
0
to
4
4.99
25°C
4.85
Full range
4.85
25°C
4.25
Full range
4.25
pA
V
4.99
4.93
4.85
4.93
V
4.85
4.65
4.25
4.65
4.25
25°C
0.01
25°C
0.09
0.01
0.15
0.09
0.15
25°C
pA
– 0.3
to
4.2
0
to
3.5
Full range
mA
µV
0.002
25°C
IOL = 5
950
1500
25°C
25°C
IOL = 50 µA
300
UNIT
MAX
µV/°C
|VIO | ≤ 5 mV
IOH = – 200 µA
TYP
2
25°C
RS = 50 Ω
Ω,
MIN
2
Full range
VIC = 2
2.5
5V
V,
AVD
300
Full range
IOH = – 1 mA
VOL
MAX
3000
25°C
to 125°C
IOH = – 20 µA
VOH
TYP
Full range
VDD ± = ± 2.5 V,
VO = 0,
TLC2274AQ,
TLC2274AM
0.9
Full range
0.15
1.5
0.9
1.5
35
0.15
V
1.5
1.5
RL = 10 kΩ‡
25°C
10
10
35
Full range
10
RL = 1 MΩ‡
25°C
175
175
10
V/mV
rid
Differential input
resistance
25°C
1012
1012
Ω
ri
Common-mode input
resistance
25°C
1012
1012
Ω
ci
Common-mode input
capacitance
f = 10 kHz,
N package
25°C
8
8
pF
zo
Closed-loop output
impedance
f = 1 MHz,
AV = 10
25°C
140
140
Ω
CMRR
Common-mode
rejection ratio
VIC = 0 to 2.7 V,
VO = 2.5 V,
RS = 50 Ω
25°C
70
Full range
70
75
70
70
75
dB
25°C
80
95
80
95
Supply-voltage
y
g rejection
j
VDD = 4.4 V to 16,
dB
ratio (∆VDD /∆VIO)
VIC = VDD /2,
No load
Full range
80
80
† Full range is – 40°C to 125°C for Q level part, – 55°C to 125°C for M level part.
‡ Referenced to 2.5 V
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
kSVR
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
25
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2274Q and TLC2274M electrical characteristics at specified free-air temperature, VDD = 5 V
(unless otherwise noted) (continued)
PARAMETER
TEST CONDITIONS
TLC2274Q,
TLC2274M
TA†
MIN
IDD
Supply current
5V
VO = 2
2.5
V,
No load
25°C
TLC2274AQ,
TLC2274AM
TYP
MAX
4.4
6
Full range
MIN
UNIT
TYP
MAX
4.4
6
6
6
mA
† Full range is – 40°C to 125°C for Q level part, – 55°C to 125°C for M level part.
TLC2274Q and TLC2274M operating characteristics at specified free-air temperature, VDD = 5 V
PARAMETER
TEST CONDITIONS
TLC2274Q,
TLC2274M
TA†
MIN
TYP
25°C
2.3
3.6
Full
range
17
1.7
TLC2274AQ,
TLC2274AM
MAX
MIN
TYP
2.3
3.6
Slew rate at unity
gain
VO = 0
0.5
5 V to 2
2.5
5V
V,
RL = 10 kΩ‡,
Vn
Equivalent
q
input
noise voltage
f = 10 Hz
25°C
50
50
f = 1 kHz
25°C
9
9
Peak-to-peak
equivalent input
noise voltage
f = 0.1 Hz to 1 Hz
25°C
1
1
VN(PP)
f = 0.1 Hz to 10 Hz
25°C
1.4
1.4
In
Equivalent input
noise current
25°C
0.6
0.6
THD + N
Total harmonic
distortion plus
noise
VO = 0.5 V to 2.5 V,
f = 20 kHz,
RL = 10 kΩ‡
Gain-bandwidth
product
f = 10 kHz,,
CL = 100 pF‡
BOM
Maximum outputswing bandwidth
VO(PP) = 2 V,,
RL = 10 kΩ‡,
ts
Settling time
AV = – 1,
Step = 0.5 V to 2.5 V,,
RL = 10 kΩ‡,
CL = 100 pF‡
SR
φm
Phase margin at
unity gain
RL = 10 kΩ‡,
CL = 100 pF
F‡
AV = 1
AV = 10
AV = 100
RL = 10 kΩ‡,
AV = 1,,
CL = 100 pF‡
V/µs
17
1.7
fA /√Hz
0.004%
0.004%
0.03%
0.03%
25°C
2 18
2.18
2 18
2.18
MHz
25°C
1
1
MHz
15
1.5
15
1.5
26
2.6
26
2.6
50°
50°
10
10
25°C
µs
25°C
To 0.01%
0 01%
POST OFFICE BOX 655303
µV
0.0013%
25°C
Gain margin
25°C
† Full range is – 40°C to 125°C for Q level part, – 55°C to 125°C for M level part.
‡ Referenced to 2.5 V
26
nV/√Hz
0.0013%
To 0.1%
0 1%
CL = 100 pF‡
UNIT
MAX
• DALLAS, TEXAS 75265
dB
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2274Q and TLC2274M electrical characteristics at specified free-air temperature, VDD± = ±5 V
(unless otherwise noted)
PARAMETER
TA†
TEST CONDITIONS
TLC2274Q,
TLC2274M
MIN
VIO
Input offset voltage
αVIO
Temperature coefficient of
input offset voltage
Input offset voltage longterm drift (see Note 4)
IIO
Input offset current
IIB
Input bias current
VICR
Common-mode input
voltage range
25°C
VO = 0,
AVD
Maximum
M
i
negative
ti peak
k
out
ut voltage
output
Large-signal
L
i
l diff
differential
ti l
voltage am
lification
amplification
300
2500
VIC = 0
0,
IO = 500 µA
VIC = 0
0,
IO = 5
VO = ± 4 V
mA
RL = 10 kΩ
0.002
µV/mo
25°C
0.5
0.5
500
500
1
1
500
25°C
–5
to
4
Full range
g
–5
to
3.5
– 5.3
to
4.2
500
–5
to
4
4.85
Full range
4.85
25°C
4.25
Full range
4.25
25°C
4.93
25°C
– 4.85
– 4.85
25°C
– 3.5
Full range
– 3.5
25°C
20
Full range
20
25°C
pA
V
4.99
4.85
4.93
V
4.85
4.65
4.25
4.65
4.25
– 4.99
Full range
– 5.3
to
4.2
pA
–5
to
3.5
4.99
25°C
RL = 1 MΩ
µV
0.002
25°C
IO = 50 µA
950
1500
25°C
|VIO | ≤ 5 mV
VIC = 0,
300
UNIT
MAX
µV/°C
25°C
IO = – 200 µA
TYP
2
Full range
RS = 50 Ω
Ω,
MIN
2
Full range
IO = – 1 mA
VOM –
MAX
3000
25°C
to 125°C
IO = – 20 µA
M i
Maximum
positive
iti peak
k
VOM +
out ut voltage
output
TYP
Full range
VIC = 0,
RS = 50 Ω
TLC2274AQ,
TLC2274AM
– 4.91
– 4.99
– 4.85
– 4.91
V
– 4.85
– 4.1
– 3.5
– 4.1
– 3.5
50
20
50
V/mV
20
rid
Differential input resistance
25°C
300
1012
ri
Common-mode input
resistance
25°C
1012
1012
Ω
ci
Common-mode input
capacitance
f = 10 kHz,
N package
25°C
8
8
pF
zo
Closed-loop output
impedance
f = 1 MHz,
AV = 10
25°C
130
130
Ω
CMRR
Common-mode rejection
j
ratio
VIC = – 5 V to 2.7 V
VO = 0,
RS = 50 Ω
25°C
75
Full range
75
kSVR
Supply-voltage
y
g rejection
j
ratio (∆VDD ± /∆VIO)
VDD ± = ± 2.2 V to ± 8 V,,
VIC = 0,
No load
25°C
80
Full range
80
80
75
300
1012
Ω
80
75
95
80
80
95
dB
dB
† Full range is – 40°C to 125°C for Q level part, – 55°C to 125°C for M level part.
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
27
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TLC2274Q and TLC2274M electrical characteristics at specified free-air temperature, VDD ± = ±5 V
(unless otherwise noted) (continued)
PARAMETER
TLC2274Q,
TLC2274M
TA†
TEST CONDITIONS
MIN
IDD
Supply current
VO = 0
0,
No load
25°C
TLC2274AQ,
TLC2274AM
TYP
MAX
4.8
6
Full range
MIN
UNIT
TYP
MAX
4.8
6
6
6
mA
† Full range is – 40°C to 125°C for Q level part, – 55°C to 125°C for M level part.
TLC2274Q and TLC2274M operating characteristics at specified free-air temperature,
VDD± = ±5 V
PARAMETER
TEST CONDITIONS
TLC2274Q,
TLC2274M
TA†
MIN
TYP
25°C
2.3
3.6
Full
range
17
1.7
TLC2274AQ,
TLC2274AM
MAX
MIN
TYP
2.3
3.6
SR
Slew rate at unity
gain
VO = ± 2
2.3
3V
V,
CL = 100 pF
F
Vn
Equivalent
input
q
noise voltage
f = 10 Hz
25°C
50
50
f = 1 kHz
25°C
9
9
Peak-to-peak
equivalent input
noise voltage
f = 0.1 Hz to 1 Hz
25°C
1
1
VN(PP)
f = 0.1 Hz to 10 Hz
25°C
1.4
1.4
In
Equivalent input
noise current
25°C
0.6
0.6
THD + N
Total harmonic
distortion plus
noise
VO = ± 2.3 V,
RL = 10 kΩ,
f = 20 kHz
Gain-bandwidth
product
f = 10 kHz,,
CL = 100 pF
RL = 10 kΩ,,
BOM
Maximum
output swing
output-swing
bandwidth
VO(PP) = 4.6 V,,
RL = 10 kΩ,
AV = 1,,
CL = 100 pF
ts
Settling time
AV = – 1,
To 0.1%
0 1%
Step = – 2.3 V to 2.3 V,,
RL = 10 kΩ,
To 0
0.01%
01%
CL = 100 pF
φm
Phase margin at
unit gain
RL = 10 kΩ,
RL = 10 kΩ,
kΩ
AV = 1
AV = 10
POST OFFICE BOX 655303
nV/√Hz
µV
fA /√Hz
0.0011%
0.0011%
0.004%
0.004%
0.03%
0.03%
25°C
2 25
2.25
2 25
2.25
MHz
25°C
0 54
0.54
0 54
0.54
MHz
15
1.5
15
1.5
32
3.2
32
3.2
52°
52°
10
10
25°C
µs
25°C
25°C
Gain margin
25°C
† Full range is – 40°C to 125°C for Q level part, – 55°C to 125°C for M level part.
28
V/µs
17
1.7
AV = 100
CL = 100 pF
UNIT
MAX
• DALLAS, TEXAS 75265
dB
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
VIO
Input offset voltage
Distribution
vs Common-mode voltage
αVIO
IIB /IIO
Input offset voltage temperature coefficient
Distribution
Input bias and input offset current
vs Free-air temperature
11
VI
Input voltage range
vs Supply
y voltage
g
vs Free-air temperature
12
13
VOH
VOL
High-level output voltage
vs High-level output current
14
Low-level output voltage
vs Low-level output current
15, 16
VOM +
VOM –
Maximum positive peak output voltage
vs Output current
17
Maximum negative peak output voltage
vs Output current
18
VO(PP)
Maximum peak-to-peak output voltage
vs Frequency
19
IOS
Short circuit output current
Short-circuit
vs Supply
y voltage
g
vs Free-air temperature
20
21
VO
Output voltage
vs Differential input voltage
22, 23
AVD
Large-signal
differential voltage
g
g
g amplification
vs Load resistance
vs Frequency
q
y
vs Free-air temperature
24
25, 26
27, 28
zo
Output impedance
vs Frequency
29, 30
CMRR
Common mode rejection ratio
Common-mode
vs Frequency
q
y
vs Free-air temperature
31
32
kSVR
Supply voltage rejection ratio
Supply-voltage
vs Frequency
q
y
vs Free-air temperature
33,, 34
35
IDD
Supply current
vs Supply
y voltage
g
vs Free-air temperature
36,, 37
38, 39
SR
Slew rate
vs Load capacitance
vs Free-air temperature
40
41
VO
Vn
THD + N
φm
1–4
5, 6
7 – 10
Inverting large-signal pulse response
42, 43
Voltage-follower large-signal pulse response
44, 45
Inverting small-signal pulse response
46, 47
Voltage-follower small-signal pulse response
48, 49
Equivalent input noise voltage
vs Frequency
Noise voltage (referred to input)
Over a 10-second period
50, 51
52
Integrated noise voltage
vs Frequency
53
Total harmonic distortion plus noise
vs Frequency
54
Gain
bandwidth product
Gain-bandwidth
vs Supply
y voltage
g
vs Free-air temperature
55
56
Phase margin
vs Load capacitance
vs Frequency
57
25, 26
Gain margin
vs Load capacitance
58
NOTE: For all graphs where VDD = 5 V, all loads are referenced to 2.5 V.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
29
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TYPICAL CHARACTERISTICS
DISTRIBUTION OF TLC2272
INPUT OFFSET VOLTAGE
DISTRIBUTION OF TLC2272
INPUT OFFSET VOLTAGE
15
20
891 Amplifiers From
2 Wafer Lots
VDD = ± 2.5 V
TA = 25°C
Percentage of Amplifiers – %
Percentage of Amplifiers – %
20
10
5
0
–1.6 –1.2 – 0.8 – 0.4
0
0.4
0.8
1.2
15
891 Amplifiers From
2 Wafer Lots
VDD = ± 5 V
TA = 25°C
10
5
0
–1.6 –1.2 – 0.8 – 0.4
1.6
Figure 1
0.8
1.2
1.6
Figure 2
DISTRIBUTION OF TLC2274
INPUT OFFSET VOLTAGE
DISTRIBUTION OF TLC2274
INPUT OFFSET VOLTAGE
20
20
992 Amplifiers From
2 Wafer Lots
VDD = ± 5 V
Percentage of Amplifiers – %
992 Amplifiers From
2 Wafer Lots
VDD = ± 2.5 V
Percentage of Amplifiers – %
0.4
VIO – Input Offset Voltage – mV
VIO – Input Offset Voltage – mV
15
10
5
0
– 1.6 – 1.2 – 0.8
– 0.4
0
0.4
0.8
1.2
1.6
15
10
5
0
– 1.6 – 1.2 – 0.8
VIO – Input Offset Voltage – mV
– 0.4
0
Figure 4
POST OFFICE BOX 655303
0.4
0.8
VIO – Input Offset Voltage – mV
Figure 3
30
0
• DALLAS, TEXAS 75265
1.2
1.6
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TYPICAL CHARACTERISTICS
INPUT OFFSET VOLTAGE
vs
COMMON-MODE VOLTAGE
INPUT OFFSET VOLTAGE
vs
COMMON-MODE VOLTAGE
1
VDD = 5 V
TA = 25°C
RS = 50 Ω
VIO – Input Offset Voltage – mV
VIO
VIO
VIO – Input Offset Voltage – mV
1
0.5
0
– 0.5
–1
–1
0
1
2
3
0.5
0
– 0.5
–1
–6 –5 –4 –3 –2
5
4
VDD = ± 5 V
TA = 25°C
RS = 50 Ω
VIC – Common-Mode Voltage – V
DISTRIBUTION OF TLC2272 INPUT OFFSET
VOLTAGE TEMPERATURE COEFFICIENT†
1
2
3
4
5
DISTRIBUTION OF TLC2272 INPUT OFFSET
VOLTAGE TEMPERATURE COEFFICIENT†
25
25
128 Amplifiers From
2 Wafer Lots
VDD = ± 2.5 V
P Package
25°C to 125°C
Percentage of Amplifiers – %
Percentage of Amplifiers – %
0
Figure 6
Figure 5
20
–1
VIC – Common-Mode Voltage – V
15
10
5
0
–5 –4
–3
–2
–1
0
1
2
3
4
5
αVIO – Temperature Coefficient – µV/°C
20
128 Amplifiers From
2 Wafer Lots
VDD = ± 5 V
P Package
25°C to 125°C
15
10
5
0
–5 –4
–3
–2
–1
0
1
2
3
4
5
αVIO – Temperature Coefficient – µV/°C
Figure 8
Figure 7
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
31
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TYPICAL CHARACTERISTICS
DISTRIBUTION OF TLC2274 INPUT OFFSET
VOLTAGE TEMPERATURE COEFFICIENT†
DISTRIBUTION OF TLC2274 INPUT OFFSET
VOLTAGE TEMPERATURE COEFFICIENT†
25
128 Amplifiers From
2 Wafer Lots
VDD = ± 2.5 V
N Package
TA = 25°C to 125°C
20
Percentage of Amplifiers – %
Percentage of Amplifiers – %
25
15
10
5
0
–5
–4
–3
–2
–1
0
1
2
3
4
128 Amplifiers From
2 Wafer Lots
VDD = ± 2.5 V
N Package
TA = 25°C to 125°C
20
15
10
5
0
–5
5
–4
αVIO – Temperature Coefficient – µV/°C
–3
3
4
12
VDD = ± 2.5 V
VIC = 0
VO = 0
RS = 50 Ω
TA = 25°C
RS = 50 Ω
10
8
25
20
IIB
15
IIO
10
6
4
2
|VIO| ≤ 5 mV
0
–2
–4
–6
5
–8
0
– 10
25
45
65
85
105
125
2
TA – Free-Air Temperature – °C
3
4
5
6
7
|VDD ±| – Supply Voltage – V
Figure 12
Figure 11
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
32
5
INPUT VOLTAGE RANGE
vs
SUPPLY VOLTAGE
VII – Input Voltage Range – V
V
IIB
I IO – Input Bias and Input Offset Currents – pA
IIB and IIO
2
Figure 10
INPUT BIAS AND INPUT OFFSET CURRENT†
vs
FREE-AIR TEMPERATURE
30
1
αVIO – Temperature Coefficient – µV/°C
Figure 9
35
–1 0
–2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
8
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TYPICAL CHARACTERISTICS
INPUT VOLTAGE RANGE†
vs
FREE-AIR TEMPERATURE
HIGH-LEVEL OUTPUT VOLTAGE†
vs
HIGH-LEVEL OUTPUT CURRENT
5
6
VDD = 5 V
VV0H
OH – High-Level Output Voltage – V
VDD = 5 V
VII – Input Voltage Range – V
V
4
3
|VIO| ≤ 5 mV
2
1
0
–1
–75 – 50
5
4
TA = 125°C
3
TA = 25°C
2
TA = – 55°C
1
0
– 25
0
25
50
75
100
125
0
TA – Free-Air Temperature – °C
1
Figure 13
4
LOW-LEVEL OUTPUT VOLTAGE†
vs
LOW-LEVEL OUTPUT CURRENT
1.2
1.4
VOL
VOL – Low-Level Output Voltage – V
VDD = 5 V
TA = 25°C
VOL
VOL – Low-Level Output Voltage – V
3
Figure 14
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
1
VIC = 0
0.8
VIC = 1.25 V
0.6
0.4
2
IOH – High-Level Output Current – mA
VIC = 2.5 V
0.2
0
VDD = 5 V
VIC = 2.5 V
1.2
1
TA = 125°C
0.8
TA = 25°C
0.6
TA = – 55°C
0.4
0.2
0
0
1
2
3
4
IOL – Low-Level Output Current – mA
5
0
5
1
2
3
4
IOL – Low-Level Output Current – mA
Figure 15
6
Figure 16
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
33
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TYPICAL CHARACTERISTICS
5
VDD ± = ± 5 V
4
TA = – 55°C
TA = 25°C
3
TA = 125°C
2
1
0
1
2
3
4
5
MAXIMUM NEGATIVE PEAK OUTPUT VOLTAGE†
vs
OUTPUT CURRENT
V OM – – Maximum Negative Peak Output Voltage – V
V OM + – Maximum Positive Peak Output Voltage – V
MAXIMUM POSITIVE PEAK OUTPUT VOLTAGE†
vs
OUTPUT CURRENT
– 3.8
VDD = ± 5 V
VIC = 0
–4
TA = 125°C
– 4.2
TA = 25°C
– 4.4
TA = – 55°C
– 4.6
– 4.8
–5
0
1
|IO| – Output Current – mA
2
10
16
RL = 10 kΩ
TA = 25°C
9
8
7
6
VDD = 5 V
4
VDD = ± 5 V
3
2
1
VID = – 100 mV
12
8
4
0
VID = 100 mV
–4
VO = 0
TA = 25°C
–8
0
100 k
1M
10 M
2
3
4
5
6
7
|VDD ±| – Supply Voltage – V
f – Frequency – Hz
Figure 19
Figure 20
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
34
6
SHORT-CIRCUIT OUTPUT CURRENT
vs
SUPPLY VOLTAGE
IIOS
OS – Short-Circuit Output Current – mA
V
V(OPP)
O(PP) – Maximum Peak-to-Peak Output Voltage – V
5
Figure 18
MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE
vs
FREQUENCY
10 k
4
IO – Output Current – mA
Figure 17
5
3
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
8
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TYPICAL CHARACTERISTICS
SHORT-CIRCUIT OUTPUT CURRENT†
vs
FREE-AIR TEMPERATURE
5
VO = 0
VDD = ± 5 V
VID = – 100 mV
11
4
VO – Output Voltage – V
IIOS
OS – Short-Circuit Output Current – mA
15
OUTPUT VOLTAGE
vs
DIFFERENTIAL INPUT VOLTAGE
7
–3
VDD = 5 V
TA = 25°C
RL = 10 kΩ
VIC = 2.5 V
3
2
–1
VID = 100 mV
1
–5
– 75
– 50
– 25
0
25
50
75 100
TA – Free-Air Temperature – °C
0
– 800
125
800
– 400
0
400
VID – Differential Input Voltage – µV
Figure 21
Figure 22
LARGE-SIGNAL DIFFERENTIAL
VOLTAGE AMPLIFICATION
vs
LOAD RESISTANCE
OUTPUT VOLTAGE
vs
DIFFERENTIAL INPUT VOLTAGE
VO – Output Voltage – V
3
1000
VDD = ± 5 V
TA = 25°C
RL = 10 kΩ
VIC = 0
AVD
A
VD – Differential Voltage Amplification – V/mV
5
1200
1
–1
–3
–5
0
250 500 750 1000
– 1000 – 750 – 500 – 250
VID – Differential Input Voltage – µV
VO = ± 1 V
TA = 25°C
100
VDD = ± 5 V
10
VDD = 5 V
1
0.1
0.1
Figure 23
1
10
RL – Load Resistance – kΩ
100
Figure 24
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
35
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TYPICAL CHARACTERISTICS
LARGE-SIGNAL DIFFERENTIAL VOLTAGE
AMPLIFICATION AND PHASE MARGIN
vs
FREQUENCY
80
135°
40
90°
20
45°
0
0°
– 20
φom
m – Phase Margin
AVD
AVD– Large-Signal Differential
Voltage Amplification – dB
60
ÁÁ
ÁÁ
ÁÁ
180°
VDD = 5 V
RL = 10 kΩ
CL = 100 pF
TA = 25°C
– 45°
– 40
1k
10 k
100 k
1M
– 90°
10 M
f – Frequency – Hz
Figure 25
LARGE-SIGNAL DIFFERENTIAL VOLTAGE
AMPLIFICATION AND PHASE MARGIN
vs
FREQUENCY
VDD = ± 5 V
RL = 10 kΩ
CL = 100 pF
TA = 25°C
AVD
AVD– Large-Signal Differential
Voltage Amplification – dB
60
ÁÁ
ÁÁ
ÁÁ
135°
40
90°
20
45°
0°
0
– 20
– 45°
– 40
1k
10 k
100 k
1M
f – Frequency – Hz
Figure 26
36
180°
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
– 90°
10 M
φom
m – Phase Margin
80
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TYPICAL CHARACTERISTICS
LARGE-SIGNAL DIFFERENTIAL
VOLTAGE AMPLIFICATION†
vs
FREE-AIR TEMPERATURE
LARGE-SIGNAL DIFFERENTIAL
VOLTAGE AMPLIFICATION†
vs
FREE-AIR TEMPERATURE
1k
VDD = ± 5 V
VIC = 0
VO = ± 4 V
VDD = 5 V
VIC = 2.5 V
VO = 1 to 4 V
AVD
AVD– Large-Signal Differential
Voltage Amplification – V/mV
AVD
AVD– Large-Signal Differential
Voltage Amplification – V/mV
1k
RL = 1 MΩ
100
ÁÁ
ÁÁ
– 50
100
ÁÁ
ÁÁ
RL = 10 kΩ
10
– 75
RL = 1 MΩ
– 25
0
25
50
75 100
TA – Free-Air Temperature – °C
RL = 10 kΩ
10
– 75
125
– 50
– 25
0
25
50
75 100
TA – Free-Air Temperature – °C
Figure 27
Figure 28
OUTPUT IMPEDANCE
vs
FREQUENCY
OUTPUT IMPEDANCE
vs
FREQUENCY
1000
1000
VDD = ± 5 V
TA = 25°C
100
zo
O
zo – Output Impedance – Ω
zo
O
zo – Output Impedance – Ω
VDD = 5 V
TA = 25°C
AV = 100
10
AV = 10
1
0.1
100
125
AV = 1
100
AV = 100
10
AV = 10
1
AV = 1
1k
10 k
100 k
1M
0.1
100
f – Frequency – Hz
1k
10 k
100 k
1M
f – Frequency – Hz
Figure 29
Figure 30
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
37
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TYPICAL CHARACTERISTICS
COMMON-MODE REJECTION RATIO
vs
FREQUENCY
90
TA = 25°C
CMRR – Common-Mode Rejection Ratio – dB
CMRR – Common-Mode Rejection Ratio – dB
100
COMMON-MODE REJECTION RATIO
vs
FREE-AIR TEMPERATURE
VDD = ± 5 V
80
VDD = 5 V
60
40
20
86
82
VIC = – 5 V to 2.7 V
78
VDD = 5 V
74
0
10
100
1k
10 k
100 k
1M
VDD = ± 5 V
70
– 75
10 M
VIC = 0 to 2.7 V
– 50
– 25
0
Figure 31
100
125
100
VDD = 5 V
TA = 25°C
kSVR
k
SVR – Supply-Voltage Rejection Ratio – dB
kSVR
k
SVR – Supply-Voltage Rejection Ratio – dB
75
SUPPLY-VOLTAGE REJECTION RATIO
vs
FREQUENCY
100
80
60
kSVR+
40
kSVR –
20
0
100
1k
10 k
100 k
1M
10 M
VDD = ± 5 V
TA = 25°C
80
60
kSVR+
40
kSVR –
20
0
– 20
10
f – Frequency – Hz
100
1k
10 k
Figure 34
POST OFFICE BOX 655303
100 k
f – Frequency – Hz
Figure 33
38
50
Figure 32
SUPPLY-VOLTAGE REJECTION RATIO
vs
FREQUENCY
– 20
10
25
TA – Free-Air Temperature – °C
f – Frequency – Hz
• DALLAS, TEXAS 75265
1M
10 M
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TYPICAL CHARACTERISTICS
TLC2272
SUPPLY CURRENT†
vs
SUPPLY VOLTAGE
SUPPLY VOLTAGE REJECTION RATIO†
vs
FREE-AIR TEMPERATURE
3
VDD ± = ± 2.2 V to ± 8 V
VO = 0
VO = 0
No Load
2.4
105
IIDD
DD – Supply Current – mA
kkSVR
SVR – Supply Voltage Rejection Ratio – dB
110
100
95
TA = 25°C
TA = – 55°C
1.2
TA = 125°C
0.6
90
85
– 75
1.8
0
– 50
– 25
0
25
50
75
100
0
125
1
TA – Free-Air Temperature – °C
2
3
4
5
6
|VDD ± | – Supply Voltage – V
Figure 35
100
125
TLC2272
SUPPLY CURRENT†
vs
FREE-AIR TEMPERATURE
3
6
VO = 0
No Load
VDD = ± 5 V
VO = 0
2.4
3.6
IIDD
DD – Supply Current – mA
4.8
IIDD
DD – Supply Current – mA
8
Figure 36
TLC2274
SUPPLY CURRENT†
vs
SUPPLY VOLTAGE
TA = 25°C
TA = – 55°C
2.4
TA = 125°C
1.2
0
7
VDD = 5 V
VO = 2.5 V
1.8
1.2
0.6
0
1
2
3
4
5
6
7
8
0
– 75
– 50
– 25
0
25
50
75
TA – Free-Air Temperature – °C
|VDD ± | – Supply Voltage – V
Figure 37
Figure 38
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
39
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TYPICAL CHARACTERISTICS
TLC2274
SUPPLY CURRENT†
vs
FREE-AIR TEMPERATURE
SLEW RATE
vs
LOAD CAPACITANCE
5
6
VDD = ± 5 V
VO = 0
4
SR – Slew Rate – V/ µ s
IIDD
DD – Supply Current – mA
4.8
VDD = 5 V
VO = 2.5 V
3.6
2.4
SR –
3
2
SR +
1
1.2
0
– 75
VDD = 5 V
AV = – 1
TA = 25°C
– 50
– 25
0
25
50
75
100
0
10
125
100
1k
CL – Load Capacitance – pF
TA – Free-Air Temperature – °C
Figure 39
Figure 40
SLEW RATE†
vs
FREE-AIR TEMPERATURE
INVERTING LARGE-SIGNAL PULSE RESPONSE
5
5
VDD = 5 V
RL = 10 kΩ
CL = 100 pF
TA = 25°C
AV = – 1
SR –
4
VO – Output Voltage – mV
VO
SR – Slew Rate – V/ µs
4
SR +
3
2
VDD = 5 V
RL = 10 kΩ
CL = 100 pF
AV = 1
1
0
– 75
10 k
3
2
1
0
– 50
– 25
0
25
50
75
100
125
0
TA – Free-Air Temperature – °C
1
2
3
4
5
6
7
8
t – Time – µs
Figure 41
Figure 42
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
40
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TYPICAL CHARACTERISTICS
VOLTAGE-FOLLOWER
LARGE-SIGNAL PULSE RESPONSE
INVERTING LARGE-SIGNAL PULSE RESPONSE
5
3
2
4
VO – Output Voltage – V
VO
4
V
VO
O – Output Voltage – V
5
VDD = ± 5 V
RL = 10 kΩ
CL = 100 pF
TA = 25°C
AV = – 1
1
0
–1
–2
–3
VDD = 5 V
RL = 10 kΩ
CL = 100 pF
AV = 1
TA = 25°C
3
2
1
–4
–5
1
0
2
3
4
5
6
7
8
0
9
0
1
2
3
t – Time – µs
Figure 43
5
6
7
8
9
Figure 44
VOLTAGE-FOLLOWER
LARGE-SIGNAL PULSE RESPONSE
5
INVERTING SMALL-SIGNAL PULSE RESPONSE
2.65
VDD = ± 5 V
RL = 10 kΩ
CL = 100 pF
TA = 25°C
AV = 1
3
2
VDD = 5 V
RL = 10 kΩ
CL = 100 pF
TA = 25°C
AV = –1
2.6
VO – Output Voltage – V
VO
4
VO – Output Voltage – V
VO
4
t – Time – µs
1
0
–1
–2
–3
2.55
2.5
2.45
–4
–5
2.4
0
1
2
3
4
5
6
7
8
9
0
0.5
t – Time – µs
1 1.5
2 2.5 3
3.5 4
4.5
5 5.5
t – Time – µs
Figure 45
Figure 46
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
41
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TYPICAL CHARACTERISTICS
VOLTAGE-FOLLOWER
SMALL-SIGNAL PULSE RESPONSE
INVERTING SMALL-SIGNAL PULSE RESPONSE
2.65
VDD = ± 5 V
RL = 10 kΩ
CL = 100 pF
TA = 25°C
AV = 1
50
VDD = 5 V
RL = 10 kΩ
CL = 100 pF
TA = 25°C
AV = 1
2.6
VO – Output Voltage – V
VO
VO – Output Voltage – mV
VO
100
0
– 50
2.55
2.5
2.45
–100
2.4
0
0.5
1
1.5
2
2.5
3
3.5
4
0
t – Time – µs
Figure 47
Figure 48
VDD = ± 5 V
RL = 10 kΩ
CL = 100 pF
TA = 25°C
AV = 1
Vn
nV HzHz
Vn – Equivalent Input Noise Voltage – nV/
VO – Output Voltage – mV
VO
50
0
–50
–100
1.5
60
VDD = 5 V
TA = 25°C
RS = 20 Ω
50
40
30
20
10
0
0
0.5
1
1.5
10
t – Time – µs
100
1k
f – Frequency – Hz
Figure 50
Figure 49
42
1
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
VOLTAGE-FOLLOWER
SMALL-SIGNAL PULSE RESPONSE
100
0.5
t – Time – µs
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
10 k
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TYPICAL CHARACTERISTICS
NOISE VOLTAGE
OVER A 10 SECOND PERIOD
60
1000
VDD = ± 5 V
TA = 25°C
RS = 20 Ω
50
VDD = 5 V
f = 0.1 to 10 Hz
TA = 25°C
750
500
Noise Voltage – nV
Vn
nV HzHz
Vn – Equivalent Input Noise Voltage – nV/
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
40
30
20
250
0
– 250
– 500
10
–750
–1000
0
10
100
1k
f – Frequency – Hz
0
10 k
2
4
Figure 51
THD + N – Total Harmonic Distortion Plus Noise – %
µ V RMS
Integrated Noise Voltage – uVRMS
Calculated Using
Ideal Pass-Band Filter
Lower Frequency = 1 Hz
TA= 25°C
10
1
0.1
100
1k
10
TOTAL HARMONIC DISTORTION PLUS NOISE
vs
FREQUENCY
100
10
8
Figure 52
INTEGRATED NOISE VOLTAGE
vs
FREQUENCY
1
6
t – Time – s
10 k
100 k
1
VDD = 5 V
TA = 25°C
RL = 10 kΩ
0.1
AV = 100
0.01
AV = 10
0.001
AV = 1
0.0001
100
1k
10 k
100 k
f – Frequency – Hz
f – Frequency – Hz
Figure 54
Figure 53
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
43
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
TYPICAL CHARACTERISTICS
GAIN-BANDWIDTH PRODUCT†
vs
FREE-AIR TEMPERATURE
GAIN-BANDWIDTH PRODUCT
vs
SUPPLY VOLTAGE
3
f = 10 kHz
RL = 10 kΩ
CL = 100 pF
TA = 25°C
2.4
VDD = 5 V
f = 10 kHz
RL = 10 kΩ
CL = 100 pF
2.8
Gain-Bandwidth Product – MHz
Gain-Bandwidth Product – MHz
2.5
2.3
2.2
2.1
2.6
2.4
2.2
2
1.8
1.6
1.4
2
0
1
6
2
3
4
5
|VDD ±| – Supply Voltage – V
7
8
– 75
– 50
Figure 55
GAIN MARGIN
vs
LOAD CAPACITANCE
15
VDD = ± 5 V
TA = 25°C
VDD = 5 V
AV = 1
RL = 10 kΩ
TA = 25°C
Rnull = 100 Ω
60°
12
Rnull = 50 Ω
Gain Margin – dB
φ
om
m – Phase Margin
125
Figure 56
PHASE MARGIN
vs
LOAD CAPACITANCE
75°
– 25
0
25
50
75 100
TA – Free-Air Temperature – °C
45°
Rnull = 20 Ω
30°
9
6
10 kΩ
15°
10 kΩ
3
VDD +
Rnull
VI
Rnull = 0
CL
0°
10
VDD –
Rnull = 10 Ω
100
1000
CL – Load Capacitance – pF
10000
0
10
Figure 57
100
1000
CL – Load Capacitance – pF
10000
Figure 58
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
44
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
APPLICATION INFORMATION
macromodel information
Macromodel information provided was derived using Microsim Parts , the model generation software used
with Microsim PSpice . The Boyle macromodel (see Note 5) and subcircuit in Figure 59 were generated using
the TLC227x typical electrical and operating characteristics at TA = 25°C. Using this information, output
simulations of the following key parameters can be generated to a tolerance of 20% (in most cases):
D
D
D
D
D
D
D
D
D
D
D
D
Maximum positive output voltage swing
Maximum negative output voltage swing
Slew rate
Quiescent power dissipation
Input bias current
Open-loop voltage amplification
Unity gain frequency
Common-mode rejection ratio
Phase margin
DC output resistance
AC output resistance
Short-circuit output current limit
NOTE 5: G. R. Boyle, B. M. Cohn, D. O. Pederson, and J. E. Solomon, “Macromodeling of Intergrated Circuit Operational Amplifiers”, IEEE Journal
of Solid-State Circuits, SC-9, 353 (1974).
99
3
VCC +
9
RSS
92
FB
+
10
VC
J1
DP
J2
IN +
11
RD1
VAD
DC
12
C1
R2
–
53
HLIM
–
C2
6
–
–
–
+
VIN
+
GCM
GA
VLIM
8
–
RD2
54
4
91
+
VIP
7
60
+
–
+ DIP
90
RO2
VB
IN –
VCC –
–
+
ISS
RP
2
1
DIN
EGND +
–
RO1
DE
5
+
VE
OUT
.SUBCKT TLC227x 1 2 3 4 5
C1
11
1214E–12
C2
6
760.00E–12
DC
5
53DX
DE
54
5DX
DLP
90
91DX
DLN
92
90DX
DP
4
3DX
EGND
99
0POLY (2) (3,0) (4,) 0 .5 .5
FB
99
0POLY (5) VB VC VE VLP VLN 0
+ 984.9E3 –1E6 1E6 1E6 –1E6
GA
6
011 12 377.0E–6
GCM 0 6 10 99 134E–9
ISS
3
10DC 216.OE–6
HLIM
90
0VLIM 1K
J1
11
210 JX
J2
12
110 JX
R2
6
9100.OE3
RD1
60
112.653E3
RD2
60
122.653E3
R01
8
550
R02
7
9950
RP
3
44.310E3
RSS
10
99925.9E3
VAD
60
4–.5
VB
9
0DC 0
VC 3 53 DC .78
VE
54
4DC .78
VLIM
7
8DC 0
VLP
91
0DC 1.9
VLN
0
92DC 9.4
.MODEL DX D (IS=800.0E–18)
.MODEL JX PJF (IS=1.500E–12BETA=1.316E-3
+ VTO=–.270)
.ENDS
Figure 59. Boyle Macromodel and Subcircuit
PSpice and Parts are trademarks of MicroSim Corporation.
Macromodels, simulation models, or other models provided by TI,
directly or indirectly, are not warranted by TI as fully representing all
of the specification and operating characteristics of the
semiconductor product to which the model relates.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
45
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
MECHANICAL DATA
D (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PIN SHOWN
0.050 (1,27)
0.020 (0,51)
0.014 (0,35)
14
0.010 (0,25) M
8
0.008 (0,20) NOM
0.244 (6,20)
0.228 (5,80)
0.157 (4,00)
0.150 (3,81)
Gage Plane
0.010 (0,25)
1
7
0°– 8°
A
0.044 (1,12)
0.016 (0,40)
Seating Plane
0.069 (1,75) MAX
0.010 (0,25)
0.004 (0,10)
PINS **
0.004 (0,10)
8
14
16
A MAX
0.197
(5,00)
0.344
(8,75)
0.394
(10,00)
A MIN
0.189
(4,80)
0.337
(8,55)
0.386
(9,80)
DIM
4040047 / D 10/96
NOTES: A.
B.
C.
D.
46
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15).
Falls within JEDEC MS-012
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
MECHANICAL DATA
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
18
17
16
15
14
13
NO. OF
TERMINALS
**
12
19
11
20
10
A
B
MIN
MAX
MIN
MAX
20
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
28
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
9
22
8
44
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
23
7
52
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
24
6
68
25
5
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
84
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
B SQ
A SQ
26
27
28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140 / D 10/96
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
This package can be hermetically sealed with a metal lid.
The terminals are gold plated.
Falls within JEDEC MS-004
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
47
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
MECHANICAL DATA
J (R-GDIP-T**)
CERAMIC DUAL-IN-LINE PACKAGE
14 PIN SHOWN
PINS **
14
16
18
20
A MAX
0.310
(7,87)
0.310
(7,87)
0.310
(7,87)
0.310
(7,87)
A MIN
0.290
(7,37)
0.290
(7,37)
0.290
(7,37)
0.290
(7,37)
B MAX
0.785
(19,94)
0.785
(19,94)
0.910
(23,10)
0.975
(24,77)
B MIN
0.755
(19,18)
0.755
(19,18)
C MAX
0.300
(7,62)
0.300
(7,62)
0.300
(7,62)
0.300
(7,62)
C MIN
0.245
(6,22)
0.245
(6,22)
0.245
(6,22)
0.245
(6,22)
DIM
B
8
14
C
1
7
0.065 (1,65)
0.045 (1,14)
0.100 (2,54)
0.070 (1,78)
0.020 (0,51) MIN
0.930
(23,62)
A
0.200 (5,08) MAX
Seating Plane
0.130 (3,30) MIN
0.100 (2,54)
0°–15°
0.023 (0,58)
0.015 (0,38)
0.014 (0,36)
0.008 (0,20)
4040083/D 08/98
NOTES: A.
B.
C.
D.
E.
48
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
This package can be hermetically sealed with a ceramic lid using glass frit.
Index point is provided on cap for terminal identification only on press ceramic glass frit seal only.
Falls within MIL STD 1835 GDIP1-T14, GDIP1-T16, GDIP1-T18, GDIP1-T20, and GDIP1-T22.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
MECHANICAL DATA
N (R-PDIP-T**)
PLASTIC DUAL-IN-LINE PACKAGE
16 PIN SHOWN
PINS **
14
16
18
20
A MAX
0.775
(19,69)
0.775
(19,69)
0.920
(23.37)
0.975
(24,77)
A MIN
0.745
(18,92)
0.745
(18,92)
0.850
(21.59)
0.940
(23,88)
DIM
A
16
9
0.260 (6,60)
0.240 (6,10)
1
8
0.070 (1,78) MAX
0.035 (0,89) MAX
0.310 (7,87)
0.290 (7,37)
0.020 (0,51) MIN
0.200 (5,08) MAX
Seating Plane
0.125 (3,18) MIN
0.100 (2,54)
0.021 (0,53)
0.015 (0,38)
0.010 (0,25) M
0°– 15°
0.010 (0,25) NOM
14/18 PIN ONLY
4040049/C 08/95
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001 (20 pin package is shorter then MS-001.)
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
49
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
MECHANICAL DATA
P (R-PDIP-T8)
PLASTIC DUAL-IN-LINE PACKAGE
0.400 (10,60)
0.355 (9,02)
8
5
0.260 (6,60)
0.240 (6,10)
1
4
0.070 (1,78) MAX
0.310 (7,87)
0.290 (7,37)
0.020 (0,51) MIN
0.200 (5,08) MAX
Seating Plane
0.125 (3,18) MIN
0.100 (2,54)
0.021 (0,53)
0.015 (0,38)
0°– 15°
0.010 (0,25) M
0.010 (0,25) NOM
4040082 / B 03/95
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001
50
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLC227x, TLC227xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS190B – FEBRUARY 1997 – REVISED JULY 1999
MECHANICAL DATA
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PIN SHOWN
0,30
0,19
0,65
14
0,10 M
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°– 8°
0,75
0,50
A
Seating Plane
0,15
0,05
1,20 MAX
0,10
PINS **
8
14
16
20
24
28
A MAX
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
DIM
4040064 / E 08/96
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-153
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
51
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright  1999, Texas Instruments Incorporated

Open as PDF

Similar pages: TI TLC2262AIPW; TI TLV2422AID; TI TLV2432AID; TI TLC2254AQDRQ1; TI TLC2264CDR; TI TLC2262IDR; TI TLV2442ID; TI TLC2801; TI TLC2201IP; TI TLV2252AIDRG4; TI TLC2202IP; TI TLC2201CP; TI TLC2254AIN; TI TLV2711IDBV; TI TLC2254AIPWR; TI TLV2772ID; TI TLC2252CDR; TI TLE2022AID; TI TLV2252IDR; TI LT1013DIP; TI TLE2072IP; TI TLV2264IDR