PROTEC U0404FC3.3C

05159
U0404FC3.3C
thru
U0404FC36C
Only One Name Means ProTek’Tion™
UNBUMPED FLIP CHIP ARRAY
APPLICATIONS
✔ Cellular Phones
✔ MCM Boards
✔ Wireless Communication Circuits
✔ IR LEDs
✔ SMART & PCMCIA Cards
IEC COMPATIBILITY (EN61000-4)
✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
✔ 61000-4-4 (EFT): 40A - 5/50ns
FEATURES
✔ ESD Protection > 25 kilovolts
✔ Available in Multiple Voltage Types Ranging From 3.3V to 36V
✔ 250 Watts Peak Pulse Power per Line (tp = 8/20µs)
✔ Bidirectional Configuration & Monolithic Structure
✔ Protects 1 to 3 Lines
✔ RoHS Compliant
MECHANICAL CHARACTERISTICS
✔ Standard EIA Chip Size: 0404
✔ Weight 0.73 milligrams (Approximate)
✔ Solder Reflow Temperature:
Tin-Lead - Sn/Pb: 240-245°C
Lead-Free: 260-270°C
✔ Flammability Rating UL 94V-0
✔ 8mm Plastic & Paper Tape and Reel Per EIA Standard 481
✔ Device Marking On Reel
PIN CONFIGURATION
05159.R4 3/05
1
www.protekdevices.com
U0404FC3.3C
thru
U0404FC36C
DEVICE CHARACTERISTICS
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
SYMBOL
VALUE
UNITS
Peak Pulse Power (tp = 8/20µs) - See Figure 1
PPP
250
Watts
Operating Temperature
TJ
-55°C to 150°C
°C
TSTG
-55°C to 150°C
°C
PARAMETER
Storage Temperature
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
(See Note 1)
U0404FC3.3C
U0404FC05C
U0404FC08C
U0404FC12C
U0404FC15C
U0404FC24C
U0404FC36C
RATED
STAND-OFF
VOLTAGE
MINIMUM
BREAKDOWN
VOLTAGE
MAXIMUM
CLAMPING
VOLTAGE
(See Fig. 2)
MAXIMUM
CLAMPING
VOLTAGE
(See Fig. 2)
MAXIMUM
LEAKAGE
CURRENT
(See Note 2)
TYPICAL
CAPACITANCE
VWM
VOLTS
@ 1mA
V(BR)
VOLTS
@ IP = 1A
VC
VOLTS
@8/20µs
VC @ IPP
@VWM
ID
µA
@0V, 1 MHz
C
pF
3.3
5.0
8.0
12.0
15.0
24.0
36.0
4.0
6.0
8.5
13.3
16.7
26.7
40.0
7.0
9.8
13.4
19.0
24.0
43.0
64.0
12.5V @ 20A
14.7V @ 17A
19.2V @ 13A
29.7V @ 9.0A
35.7V @ 7.0A
55.0V @ 5.0A
84.0V @ 3.0A
75*
10**
10***
1
1
1
1
150
100
75
50
40
30
25
Note 1: All devices are bidirectional. Electrical characteristics apply in both directions.
Note 2: *Maximum leakage current < 5µA @ 2.8V. **Maximum leakage current <500nA @ 3.3V. ***Maximum leakage current <200nA @ 5V.
FIGURE 1
PEAK PULSE POWER VS PULSE TIME
IPP - Peak Pulse Current - % of IPP
PPP - Peak Pulse Current - Watts
10,000
1,000
250W, 8/20µs Waveform
100
10
0.01
05159.R4 3/05
FIGURE 2
PULSE WAVE FORM
120
tf
100
TEST
WAVEFORM
PARAMETERS
tf = 8µs
td = 20µs
Peak Value IPP
80
e-t
60
40
td = t I /2
PP
20
0
1
10
100
td - Pulse Duration - µs
1,000
10,000
2
0
5
10
15
t - Time - µs
20
25
30
www.protekdevices.com
U0404FC3.3C
thru
U0404FC36C
GRAPHS
FIGURE 3
POWER DERATING CURVE
100
Peak Pulse Power
8/20µs
% Of Rated Power
80
60
40
20
Average Power
0
0
25
50
75
100
125
TL - Lead Temperature - °C
150
FIGURE 4
OVERSHOOT & CLAMPING VOLTAGE FOR U0404FC05C
5 Volts per Division
35
25
15
5
-5
ESD Test Pulse - 25 kilovolt, 1/30ns (waveshape)
FIGURE 5
TYPICAL CLAMPING VOLTAGE VS PEAK PULSE CURRENT FOR U0404FC05C
VC - Clamping Voltage - Volts
14
12
10
8
6
4
2
0
0
5
10
15
20
IPP - Peak Pulse Current - Amps
05159.R4 3/05
3
www.protekdevices.com
U0404FC3.3C
thru
U0404FC36C
APPLICATION INFORMATION
PRINTED CIRCUIT BOARD RECOMMENDATIONS
PARAMETER
VALUE
Pad Size on PCB
Pad Shape
Pad Definition
Solder Mask Opening
Solder Stencil Thickness
Solder Stencil Aperture Opening (laser cut, 5% tapered walls)
Solder Paste Type
Pad Protective Finish
Tolerance - Edge To Corner Ball
Solder Ball Side Coplanarity
Maximum Dwell Time Above Liquidous (183°C)
Soldering Maximum Temperature
0.275mm
Round
Non-Solder Mask Defined Pads
0.325mm Round
0.150mm
0.330mm Round
No Clean
OSP(Entek Cu Plus 106A)
±50µm
±20µm
60 Seconds
270°C
RECOMMENDED NON-SOLDER MASK
DEFINED PAD ILLUSTRATION
REQUIREMENTS
Non-Solder Mask Defined Pad
0.275mm DIA.
Temperature:
TP for Lead-Free (SnAgCu): 260-265°C
TP for Tin-Lead: 240-245°C
Preheat time and temperature depends on solder paste and flux
activation temperature, component size, weight, surface area &
plating.
Solder Mask Opening
0.325mm DIA.
Solder Stencil Opening
0.330mm DIA.
TP
Temperature - °C
Ramp-up
Ramp-down
TL
TSMAX
155°
TSMIN
140°
TS - Preheat
t 25°C to Peak
30-60 seconds
05159.R4 3/05
Ramp-up
15 seconds
4
Solder Time
15-20 seconds
Ramp-down
www.protekdevices.com
U0404FC3.3C
thru
U0404FC36C
PACKAGE OUTLINE & DIMENSIONS
PACKAGE DIMENSIONS
SIDE
B
TOP
C
A
PACKAGE OUTLINE
DIM
MILLIMETERS
INCHES
A
0.56 NOM
0.022 NOM
B
0.86 NOM
0.034 NOM
C
1.0 ± 0.02
0.039 ± 0.001
E
0.15 SQ
0.006 SQ
F
1.0 ± 0.0254
0.039 ± 0.001
I
0.406 NOM
0.016 NOM
NOTES:
1. Controlling dimensions in inches.
2. Decimal tolerances for mounting pad and
outline: .xxx ± 0.05mm (± 0.002”).
E
F
Metalized Die Contacts
END
I
PAD DIMENSIONS
D
MOUNTING PAD LAYOUT - Option 1
A
C
MILLIMETERS
INCHES
A
C
D
E
F
G
H
I
0.51
0.30
0.46
0.20
0.15 SQ
0.71
0.99
0.51
0.020
0.012
0.018
0.008
0.006 SQ
0.028
0.039
0.020
NOTE:
G
H
E
DIE
SOLDER
CONTACT
DIM
1. Preferred: Using 0.1mm (0.004”) stencil.
F
I
SOLDER PADS
SOLDER PRINT
0.010” - 0.012” DIA.
SOLDER MASK
Outline & Dimensions: Rev 3 - 9/04, 06024
05159.R4 3/05
5
www.protekdevices.com
U0404FC3.3C
thru
U0404FC36C
PACKAGE OUTLINE & DIMENSIONS
MOUNTING PAD LAYOUT - Option 2
PACKAGE DIMENSIONS
DIM
A
COPPER
CONTACTS
0.009” [0.23] DIA.
G
H
DIE
SOLDER
CONTACT
MILLIMETERS
INCHES
A
0.51
0.020
F
0.15 SQ
0.006 SQ
G
0.71
0.028
H
0.99
0.039
I
0.51
0.020
NOTES:
1. Controlling dimensions in inches.
2. Decimal tolerances for mounting pad and
outline: .xxx ± 0.05mm (± 0.002”).
3. Preferred: Using 0.1mm (0.004”) stencil.
Outline & Dimensions: Rev 3 - 9/04, 06024
TAPE & REEL ORIENTATION
F
I
SOLDER PRINT
0.014” - [0.36] DIA.
Laser
Orientation
Line
SOLDER MASK
Dual Die - 0404
NOTE:
1. Top view of tape. Solder bumps are face
down in tape package.
TAPE & REEL ORDERING NOMENCLATURE
1. Surface mount product is taped and
reeled in accordance with EIA 481.
2. 8mm Plastic Tape: 7 Inch Reels - 5,000
pieces per reel. Ordering Suffix: -T75-1
(i.e., U0404FC05C-T75-1).
3. 8mm Paper Tape: 7 Inch Reels - 10,000
pieces per reel. Ordering Suffix: -T710-2
(i.e., U0404FC05C-T710-2).
COPYRIGHT © ProTek Devices 2005
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical
characteristics described herein without notice (except JEDEC).
ProTek Devices
2929 South Fair Lane, Tempe, AZ 85282
Tel: 602-431-8101 Fax: 602-431-2288
E-Mail: [email protected]
Web Site: www.protekdevices.com
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that
the final judgement concerning selection and specifications is the buyer’s and that in furnishing
engineering and technical assistance, ProTek assumes no responsibility with respect to the
selection or specifications of such products.
05159.R4 3/05
6
www.protekdevices.com