ETC LC0406FC24C

05158
LC0406FC3.3C
thru
LC0406FC24C
. . . engineered solutions for the transient environment™
BIDIRECTIONAL LOW CAPACITANCE FLIP CHIP
APPLICATIONS
✔ Cellular Phones
✔ Handheld Electronics
✔ Personal Digital Assistants (PDAs)
✔ Notebook Computers
✔ SMART Cards
IEC COMPATIBILITY (EN61000-4)
0406
✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
✔ 61000-4-4 (EFT): 40A - 5/50ns
(Single Chip Shown)
FEATURES
✔ ESD Protection > 25 kilovolts
✔ Available in Six Voltage Types Ranging From 3.3V to 24V
✔ 200 Watts Peak Pulse Power Dissipation per Line (8/20µs)
✔ Low Clamping Voltage
✔ LOW CAPACITANCE
✔ LOW STANDBY CURRENT
MECHANICAL CHARACTERISTICS
✔ Standard EIA Chip Size: 0406
✔ Weight 0.73 milligrams (Approximate)
✔ Flammability Rating UL 94V-0
✔ 8mm Plastic & Paper Tape and Reel Per EIA Standard 481
✔ Device Marking On Reel
✔ Top Contacts: Solder Bump 0.004” in Height (Nominal)
CIRCUIT DIAGRAM
05158.R2 11/02
1
www.protekdevices.com
LC0406FC3.3C
thru
LC0406FC24C
DEVICE CHARACTERISTICS
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
SYMBOL
VALUE
UNITS
Peak Pulse Power (tp = 8/20µs) - See Figure 1
PPP
200
Watts
Operating Temperature
TJ
-55°C to 150°C
°C
TSTG
-55°C to 150°C
°C
PARAMETER
Storage Temperature
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
(See Note 1)
LC0406FC3.3C
LC0406FC05C
LC0406FC08C
LC0406FC12C
LC0406FC15C
LC0406FC24C
RATED
STAND-OFF
VOLTAGE
MINIMUM
BREAKDOWN
VOLTAGE
MAXIMUM
CLAMPING
VOLTAGE
(See Fig. 2)
MAXIMUM
CLAMPING
VOLTAGE
(See Fig. 2)
VWM
VOLTS
@ 1mA
V(BR)
VOLTS
@ IP = 1A
VC
VOLTS
3.3
5.9
8.0
12.0
15.0
24.0
4.0
6.0
8.0
13.3
16.7
26.7
7.0
11.0
13.2
19.8
25.4
37.2
MAXIMUM
LEAKAGE
CURRENT
TYPICAL
CAPACITANCE
@8/20µs
VC @ IPP
@VWM
ID
µA
0V @ 1 MHz
C
pF
12.5V @ 16A
13V @ 15A
18V @ 11A
26.9V @ 7.4A
34.5V @ 5.8A
50.6V @ 4A
75
10
1
1
1
1
70
35
32
30
25
20
Note 1: All devices are bidirectional. Electrical characteristics apply in both directions. Electrical characteristics for 3V, 8V, 12V, 15V and 24V devices are preliminary.
FIGURE 1
PEAK PULSE POWER VS PULSE TIME
120
IPP - Peak Pulse Current - % of IPP
PPP - Peak Pulse Current - Watts
10,000
1,000
200W, 8/20µs Waveform
100
10
0.01
05158.R2 11/02
FIGURE 2
PULSE WAVE FORM
tf
100
Peak Value IPP
80
e-t
TEST
WAVEFORM
PARAMETERS
tf = 8µs
td = 20µs
60
40
td = t I /2
PP
20
0
1
10
100
td - Pulse Duration - µs
1,000
10,000
2
0
5
10
15
t - Time - µs
20
25
www.protekdevices.com
30
LC0406FC3.3C
thru
LC0406FC24C
GRAPHS
FIGURE 3
POWER DERATING CURVE
100
Peak Pulse Power
8/20µs
80
% Of Rated Power
FIGURE 4
REFLOW SOLDER PROFILE
225°C
5-10 sec
60
200°C
Instantaneous
to 200°C
40
1-2 Minutes
to 150°C
20
1-2 Minutes to 25°C
100°C
Average Power
0
0
25
50
75
100
125
TL - Lead Temperature - °C
150
Pre-Heat
Time
Soldering
Time
Cool Down
Time
Note: This reflow profile does not take into account the printed circuit board (PCB) material
heating time. Additional time may be required for the preheat time and cool down time upon the
PCB or board material.
FIGURE 5
OVERSHOOT & CLAMPING VOLTAGE FOR LC0406FC05C
40
5 Volts per Division
30
20
10
0
ESD Test Pulse - 12 kilovolt, 1/30ns (waveshape)
FIGURE 6
TYPICAL CLAMPING VOLTAGE VS PEAK PULSE CURRENT FOR LC0406FC05C
VC - Clamping Voltage - Volts
14
12
10
8
6
4
2
0
0
5
10
15
20
IPP - Peak Pulse Current - Amps
05158.R2 11/02
3
www.protekdevices.com
LC0406FC3.3C
thru
LC0406FC24C
PACKAGE OUTLINE & DIMENSIONS
PACKAGE OUTLINE
0406
PACKAGE DIMENSIONS
DIM
MILLIMETERS
INCHES
A
0.46 NOM
0.022 NOM
B
0.56 NOM
0.034 NOM
C
0.99 ± 0.0254
0.039 ± 0.001
G
C
A
B
TOP
SIDE
Picture Not Available
E
F
H
END
I
E
0.15 SQ
0.006 SQ
F
1.5 ± 0.0254
0.059 ± 0.001
G
0.15 NOM
0.006 NOM
H
0.127 MAX
0.005 MAX
I
MOUNTING PAD - Option 1
DIM Millimeters
D
A
C
PAD DIMENSIONS
E
DIE
SOLDER
BUMPS
A
C
D
E
F
G
H
I
0.51
0.30
0.46
0.20
0.15 SQ
0.71
0.99
0.51
Inches
0.020
0.012
0.018
0.008
0.006 SQ
0.028
0.039
0.020
0.076 MIN
0.003 MIN
0.406 NOM
0.016 NOM
NOTES:
1. Controlling dimensions in inches.
2. Decimal tolerances for mounting pad and
outline: .xxx ± 0.05mm (± 0.002”).
TAPE & REEL ORIENTATION
H
G
NOTE:
Preferred: Using 0.1mm (0.004”)
stencil.
I
F
Triple Die - 0406
NOTE:
1. Top view of tape. Solder bumps are face
down in tape package.
SOLDER PADS
SOLDER PRINT
0.010” - 0.012” DIA.
SOLDER MASK
06023 Rev3 -11/02
TAPE & REEL ORDERING INFORMATION:
Surface mount product is taped and reeled in accordance with EIA-481.
Plastic Tape: 7 Inch Reels - 5,000 pieces per reel. Ordering Suffix: -T75-1 (i.e., LC0406FC05C-T75-1).
Paper Tape: 7 Inch Reels - 5,000 pieces per reel. Ordering Suffix: -T75-2 (i.e., LC0406FC05C-T75-2).
05158.R2 11/02
4
www.protekdevices.com
LC0406FC3.3C
thru
LC0406FC24C
PACKAGE OUTLINE & DIMENSIONS
MOUNTING PAD LAYOUT - Option 2
PAD DIMENSIONS
DIM
COPPER CONTACTS
0.009” [0.23] DIA.
A
H
G
DIE
SOLDER
BUMPS
I
Millimeters
Inches
A
0.51
0.020
F
G
0.15 SQ
0.71
0.006 SQ
0.028
H
I
0.99
0.51
0.039
0.020
NOTES:
1. Controlling dimensions in
inches.
2. Decimal tolerances for
mounting pad and
outline:
.xxx ± 0.05mm (± 0.002”).
3. Preferred: Using 0.1mm (0.004”)
F
stencil.
SOLDER PRINT
0.014” [0.36] DIA.
SOLDER MASK
06023 Rev 3 - 11/02
COPYRIGHT © ProTek Devices 2003
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without
notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final
judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance,
ProTek assumes no responsibility with respect to the selection or specifications of such products.
05158.R2 11/02
5
ProTek Devices
2929 South Fair Lane, Tempe, AZ 85282
Tel: 602-431-8101 Fax: 602-431-2288
E-Mail: [email protected]
Web Site: www.protekdevices.com
www.protekdevices.com