SCS16DSTL 0.15A , 75V Plastic-Encapsulated Switching Diode Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free DESCRIPTION WBFBP-03D Epitaxial planar Silicon diode D FEATURES E L C Fast Switching Speed Ultra-Small Surface Mount Package For General Purpose Switching Applications High Conductance D H B APPLICATIONS A High Conductance Ultra Fast Diode For portable equipment:(i.e. Mobile phone, MP3, MD, CD-ROM, DVD-ROM, Note book PC, etc.) REF. A B C D E F MARKING KA2 F K G J Millimeter Min. Max. 0.950 1.050 0.950 1.050 0.010 0.070 0.210 0.310 0.350 REF. 0.680 REF. Millimeter Min. Max. 0.050 0.510 0.610 0.250 0.350 0.050 0.450 0.550 REF. G H J K L TOP VIEW PACKAGE INFORMATION Package MPQ Leader Size WBFBP-03D 5K 7 inch ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise specified) Parameters Symbol Rating Unit Non-Repetitive Peak Reverse Voltage VRM 100 V Peak Repetitive Reverse Voltage VRRM 75 V Working Peak Reverse Voltage VRWM 75 V VR 75 V VR(RMS) 53 V Forward Continuous Current IFM 300 mA Average Rectified Output Current IO 150 mA DC Blocking Voltage RMS Reverse Voltage Non-Repetitive Peak Forward Surge Current t=1.0µs t=1.0s Power Dissipation Thermal Resistance From Junction to Ambient Operating Junction & Storage Temperature http://www.SeCoSGmbH.com/ 21-Jul-2011 Rev. A 2 IFSM A 1 PD 100 mW RθJA 1250 °C / W TJ ,TSTG 125,-65~150 °C Any changes of specification will not be informed individually. Page 1 of 2 SCS16DSTL 0.15A , 75V Plastic-Encapsulated Switching Diode Elektronische Bauelemente ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise specified) Parameters Symbol Min. Max. Unit VF1 - 0.715 V IF=1mA VF2 - 0.855 V IF=10mA VF3 - 1.0 V IF=50mA VF4 - 1.25 V IF=150mA Maximum DC Reverse Current at rated DC blocking voltage IR1 - 1 µA VR=75V IR2 - 25 nA VR=20V Capacitance between terminals CT - 2 pF VR=0V, f=1MHz Maximum Reverse Recovery Time TRR - 4 nS IF=IR=10mA Forward Voltage Test Conditions CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 21-Jul-2011 Rev. A Any changes of specification will not be informed individually. Page 2 of 2