E1736A USB Sensor Hub
Data Sheet
This Sensor Hub provides the interface for the Agilent E1737A Material Sensor and
Agilent E1738A Air Temperature/Pressure/Humidity Sensor used with the Agilent
5530 Dynamic Calibrator system. These sensors monitor parameters in the
environment of the device being calibrated to enable the laser system to calculate
appropriate correction factors. The E1736A can accommodate multiple sensors of
both types. The axis module interfaces with the system PC via a standard high-speed
USB 2.0 interface.
Specifications of the Sensor Hub (E1736A):
Measurement Range:
0 - 40°C (32 – 104°F)
air temperature
0 - 55°C (32 – 131°F)
material temperature
70 – 110 kPa (10.2 – 16.0 psia)
air pressure
10 – 90%
relative humidity
Measurement Resolution:
0.004°C (0.007°F)
air/material temperature
5 Pa (0.001 psi)
air pressure
relative humidity
per 15 sec
Refresh Rate:
102 x 63 x 24 mm (4.02 x 2.48 x 0.95 in)
200g (0.44 lb)
Printed in the USA February 2, 2009
Additional information is available at: