E1735A USB Axis Module
Data Sheet
The Agilent E1735A USB Axis Module is the electronic interface for the 5519A/B laser
head used in the Agilent 5530 Dynamic Calibrator system. The axis module also provides
the interface for both the optional remote control unit and optional A-quad-B encoder
input. The axis module communicates via a standard high-speed USB 2.0 interface with
the system PC running Microsoft Windows® operating system (Windows 98® or later).
Specifications of the USB Axis Module (E1735A):
Measurement Range:
0 - 84 m (±42 m)
(Linear Interferometer)
Typical Resolution:
1 nm
(Linear Interferometer)
0.5 nm
(Plane Mirror Interferometer)
0.006 arc-sec
(Angular Interferometer)
100 kHz - 10 MHz
Measurement Frequency:
100 kHz
Data Sampling Rate:
> 2 ns edge-to-edge, or < 10 MHz
A-quad-B Input Rate:
+5 V, 280 mA maximum current (typical)
Power Requirement:
0 - 40°C (32 – 104°F)
Operating Temperature:
102 x 63 x 24 mm (4.02 x 2.48 x 0.95 in)
220 g (0.48 lb)
Printed in the USA February 8, 2009
Additional information is available at: