BVLED BVM-SFRGB2S-T

Bright View Electronics
RGB FLEXSTRIP LIGHT
BVM-SFRGB2S-T
■ DESCRIPTION
RGB Flexstrip Light is high brightness RGB SMD LED
mounted on FPC. Each LED contains red, green, blue
color.
Bright View provides full color spectrum controller and
please refer to the specifications of BVM-FSCC and
BVC-P Series Transformer which are UL, CE and CB certified.
■ FEATURES
Module FPC with 216 SMD LEDs
Product Size (LxWXH) : 3240mm x 12.9mm x 2.4mm(with 216pcs RGB LED per reel)
Product Size (LxWXH) : 3240mm x 12.9mm x 2.8mm(with adhesive-tape back)
Smallest unit(135mm) of 9 RGB LEDs can be cut at mark place
Continuous length flexible LED light strips
Low power consumption, high intensity
Runs on DC 12 volt power supply
Optionally provided with adhesive-tape back at temperature rang -30 ℃ to 200℃
BVM-SFRGB2S-T:("-T" with adhesive-tape back)
Lead (Pb) free, and Rohs complaint
■ APPLICATIONS
Amusement park & theater mood lighting
Architectural decorative lighting
Backlighting for signage letters
Auditorium walkway lighting
Stairway accent lighting
Hallway lighting
Date:2008/05/13
Page :1 of 5
Version B
Bright View Electronics
RGB FLEXSTRIP LIGHT
BVM-SFRGB2S-T
■ PRODUCT DIMENSION
■ PART NUMBERING SYSTEM
B V M - S F R G B 2 S
LED Type Code
Operating Voltage Code
Color Code
Product Code
LED Module
Date:2008/05/13
Page :2 of 5
Version B
Bright View Electronics
RGB FLEXSTRIP LIGHT
BVM-SFRGB2S-T
■ ABSOLUTE MAXIMUM RATINGS AT Ta = 25 ℃
PARAMETER
BVM-SFRGB2S
Operating Voltage
Max. Operating Voltage
Power Dissipation/Unit
Power Dissipation/Reel
Luminous Intensity Matching Ratio
Operating Temperature Range
Storage Temperature Range
12V
13V
2.5W
60W
1.5 : 1
-30 ℃ to +50 ℃
-30 ℃ to +85 ℃
■ ELECTRICAL / OPTICAL CHARACTERISTICS at Vin = 12V DC Ta = 25 ℃
SYMBOL PARAMETER
λp
λd
2θ1/2
I
I
Φ
Φ
Light Color
Peak Emission Wavelength
Dominant Wavelength
LED Viewing Angle
Operating Current/Unit(Typ.)
Operating Current/Reel
Luminous flux/Unit (Typ.)
Luminous flux/Reelt (Typ.)
Date:2008/05/13
Unit
BVM-SFRGB2S
Red
633
625
120
57
1.36
20.7
497
Page :3 of 5
Green
520
525
120
57
1.36
30.6
734.0
Blue
462
465
120
57
1.36
5.9
142.0
nm
nm
deg
mA
A
lm
lm
Version B
Bright View Electronics
RGB FLEXSTRIP LIGHT
BVM-SFRGB2S-T
■ PACKING
Vie
DE:
y
N O.:
:
NO.
Q't
GRA
LOT
ht
Brig
P ART
w
E lectr
ES
DEVICPT
IVE
EXCE
ENSIT DLE ATION
KST
Ltd.
,
QA
s Co.
S
HAN
WOR
TATICO R
REE
onic
pcs
TROSOPEN
TIC-F
E LEC N OT
DO A STA
AT
B right V iew
E lectronics C o.,Ltd.
P A R T N O .:
LO T N O .:
G RA D E:
pcs
Q 'ty
QA
E LE CTR O STA TIC S E NSITIV E DEV ICE S
DO N O T O P E N O R HA NDL E E X CE PT
A T A S TA TIC-FRE E W O RK ST ATIO N
A nti-electrostatic bag
24
C arton : 20 R eels
39
RE
26
Date:2008/05/13
IT EM N O .
D EV IC E:
Q 'TY
N . W .:
G . W .:
PC S .
KG S .
KG S.
Y
C A R TO N
D im ension(cm ): 39 x 24 x 26
Page :4 of 5
Version B
Bright View Electronics
RGB FLEXSTRIP LIGHT
BVM-SFRGB2S-T
■ CAUTIONS
1. Bright View Electronics reserves the rights to modify specifications and remove availability
of products at any time without notice.
2. Solder connection should only be performed on designated solder pads(marked +/-).
During soldering, do not execeed the maximum soldering time of 10 seconds
and the maximum soldering temperature of 260 ℃.
3. Correct electrical polarity needs to be observed. Inadequate polarity may cause the destroy
of the LED module.
4. In addition to other specific application concerns and local safety codes,
following basic safety features are required when using power supply:
﹒overload protection
﹒short circuit protection
﹒over heat protection
﹒correct output voltage, including consideration for ripple and spikes
5. Make sure that the power supply has enough power to operate the total load.
6. When mounting on metallic ,it requires the electrical isolation between module and
mounting surface.
7.Customer's desired lengths of minimum 135mm and its multiple can be made by breaking
at the cutting mark of FPC.
8.The FPC (No. BVM-SFRGB2S ) can be operated at maximum current of 1.5A.
9.This product is not waterproof and precaution should be taken to keep from exposure to moisture.
Date:2008/05/13
Page :5 of 5
Version B