Dual Pole Parameter Load Voltage Load Current Max RON Rating 250 50 100 OAA160 OptoMOS® Relays Description OAA160 is a 250V, 50mA, 100Ω dual 1-Form-A relay. This high performance product provides the fastest (0.125ms) switching available for two independent Form-A relays in a single package. Units V mA Ω Features • Small 8 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750Vrms Input/Output Isolation • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Surface Mount and Tape & Reel Versions Available Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-10 • Certified to: • EN 60950 • EN 41003 Ordering Information Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hook Switch • Dial Pulsing • Ground Start • Ringing Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Part # OAA160 OAA160P OAA160PTR OAA160S OAA160STR Description 8 Pin DIP (50/tube) 8 Pin Flatpack (50/tube) 8 Pin Flatpack (1000/Reel) 8 Pin Surface Mount (50/tube) 8 Pin Surface Mount (1000/Reel) Pin Configuration OAA160 Pinout AC/DC Configuration + Control - Pole #1 – Control - Pole #1 + Control - Pole #2 – Control - Pole #2 1 8 2 7 3 6 4 5 Normally Open - Pole #1 Normally Open - Pole #2 Switching Characteristics of Normally Open (Form A) Devices CONTROL ILOAD RoHS 2002/95/EC DS-OAA160-R06 e3 + 90% 10%+ 10%+ TON www.clare.com TOFF 1 OAA160 Absolute Maximum Ratings (@ 25˚ C) Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C Ratings 250 5 50 1 1501 8002 3750 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units V V mA A mW mW Vrms °C °C Electrical Characteristics Parameter Output Characteristics @ 25°C Load Current* AC/DC Configuration Peak Load Current On-Resistance AC/DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Input to Output Capacitance Conditions Symbol Min Typ Max Units Continuous t=10ms IL ILPK - - 50 100 mA mA IL=50mA VL=250V RON ILEAK - 50 - 100 0.025 Ω µA IF=10mA, VL=10V IF=10mA, VL=10V IF=4.0mA, VL=10V IF=4.0mA, VL=10V 50V; f=1MHz TON TOFF TON TOFF COUT 0.060 - 5 0.125 0.125 0.150 0.055 - ms ms ms ms pF IL=50mA IF=10mA VR=5V - IF IF VF IR CI/O 0.4 0.9 - 0.7 1.2 3 3 1.4 10 - mA mA V µA pF *NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value. 2 www.clare.com R06 OAA160 PERFORMANCE DATA* 35 20 15 10 25 20 15 10 5 5 0 0 1.17 1.19 1.21 1.23 1.25 25 42.5 43.5 15 10 5 2.525 2.975 3.425 Load Current (mA) 10 5 0.022 0.027 0.032 367.5 374.5 30 0.037 388.5 395.5 402.5 OAA160 Typical Turn-On Time (N=50 Ambient Temperature = 25ºC) (Load Current = 50mADC; IF = 10mADC) 25 15 10 5 100 90 80 70 60 50 40 30 20 10 0 381.5 Blocking Voltage (V) 20 15 10 5 0 1.625 2.075 2.525 2.975 3.425 0.05 3.875 0.07 0.09 0.11 0.13 0.15 Turn-On (ms) OAA160 Typical Load Current vs. Temperature 0.014 OAA160 Typical Leakage vs. Temperature (Measured across Pins 5 & 6 or 7 & 8) 0.012 IF=30mA IF=20mA IF=10mA 0.010 0.008 0.006 0.004 0.002 -40 -20 0 20 40 60 80 100 0 120 -40 -20 0 20 40 60 80 Turn-Off (ms) Temperature (ºC) Temperature (°C) OAA160 Typical Blocking Voltage vs. Temperature OAA160 Typical Turn-On vs. Temperature (Load Current = 50mADC) OAA160 Typical Turn-Off vs. Temperature (Load Current = 50mADC) 400 1.50 395 1.25 390 Turn-On (ms) Blocking Voltage (V) 10 0 47.5 385 380 375 1.00 0.75 0.50 370 0.25 365 0 -40 -20 0 20 40 60 Temperature (ºC) 80 100 Turn-Off (ms) Device Count (N) 15 0.017 15 LED Current (mA) OAA160 Typical Turn-Off Time (N=50 Ambient Temperature = 25ºC) (Load Current = 50mADC; IF = 10mADC) 0.012 46.5 20 0 3.875 20 0 45.5 OAA160 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25ºC) (Load Current = 50mADC) LED Current (mA) 25 44.5 Device Count (N) Device Count (N) Device Count (N) 20 2.075 20 On-Resistance (Ω) OAA160 Typical IF for Switch Operation (N=50 Ambient Temperature = 25ºC) (Load Current = 50mADC) 1.625 25 5 LED Forward Voltage Drop (V) 0 OAA160 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) 30 Device Count (N) Device Count (N) 25 25 35 30 30 Device Count (N) OAA160 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25ºC) (Load Current = 50mADC; IF = 10mADC) Leakage (µA) 35 OAA160 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25ºC) IF = 10mADC IF=10mA IF=20mA -40 -20 0 20 40 60 Temperature (ºC) 80 100 0.050 0.045 0.040 0.035 0.030 0.025 0.020 0.015 0.010 0.005 0 100 IF=10mA -40 -20 0 20 40 60 80 100 Temperature (ºC) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R06 www.clare.com 3 OAA160 OAA160 Typical Turn-On vs. LED Forward Current (Load Current = 50mADC) OAA160 Typical LED Forward Voltage Drop vs. Temperature 1.8 0.040 0.16 1.6 0.14 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 0.035 0.12 Turn-Off (ms) 1.4 0.10 0.08 0.06 0.04 0 120 0 5 10 LED Current (mA) On-Resistance (Ω) 60 50 40 30 20 10 -20 0 20 40 60 80 100 5.000 4.500 4.000 3.500 3.000 2.500 2.000 1.500 1.000 0.500 0 20 25 30 35 40 45 0.015 50 0 5 10 OAA160 Typical IF for Switch Operation vs. Temperature (Load Current = 50mADC) -40 -20 0 20 40 60 OAA160 Typical Load Current vs. Load Voltage (Ambient Temperature = 25ºC) IF = 10mADC 0.45 15 20 25 30 35 40 45 50 LED Forward Current (mA) 80 100 Temperature (ºC) Temperature (ºC) 5.000 4.500 4.000 3.500 3.000 2.500 2.000 1.500 1.000 0.500 0 OAA160 Typical IF for Switch Dropout vs. Temperature -40 -20 0 20 40 60 80 100 Temperature (°C) OAA160 Energy Rating Curve 0.40 Load Current (A) 50 40 30 20 10 0 -10 -20 -30 -40 -50 15 LED Current (mA) 70 -40 0.025 LED Forward Current (mA) OAA160 Typical On-Resistance vs. Temperature (Load Current = 50mADC; IF = 10mADC) 0 0.030 0.020 0.02 Temperature (ºC) Load Current (mA) OAA160 Typical Turn-Off vs. LED Forward Current (Load Current = 50mADC) 0.18 Turn-On (ms) LED Forward Voltage Drop (V) PERFORMANCE DATA* 0.35 0.30 0.25 0.20 0.15 0.10 0.05 -3 -2 -1 0 1 Load Voltage (V) 2 3 0 10µs 100µs 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R06 OAA160 Manufacturing Information Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. RoHS 2002/95/EC e3 Recommended soldering processes are limited to 260ºC component body temperature for 10 seconds. MECHANICAL DIMENSIONS PC Board Pattern (Top View) 8 Pin DIP Through Hole (Standard) PC Board Pattern (Top View) 2.540 ± 0.127 8 Pin DIP Surface Mount (“S” Suffix) (0.100 ± 0.005) 8.305 ± 0.127 (0.327 ± 0.005) 1.905 ± 0.127 (0.075 ± 0.005) 1.498 ± 0.127 (0.059 ± 0.005) PC Board Pattern (Top View) 8 Pin Flatpack (“P” Suffix) ± ± Dimensions: mm (inches) R06 www.clare.com 5 MECHANICAL DIMENSIONS Tape and Reel Packaging for 8-Pin Surface Mount Package 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 1 W = 16.30 max (0.642 max) 8 Bo = 10.30 (0.406) Top Cover Tape P = 12.00 (0.472) Embossed Carrier Embossment K0 = 4.90 (0.193) Ao = 10.30 (0.406) User Direction of Feed K1 = 4.20 (0.165) NOTE: Tape dimensions not shown, comply with JEDEC Standard EIA-481-2 Tape and Reel Packaging for 8-Pin Flatpack Package 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 1 8 W = 16.30 max (0.642 max) Bo = 10.30 (0.406) Top Cover Tape Embossed Carrier P = 12.00 (0.472) Embossment K0 = 2.70 (0.106) Ao = 10.30 (0.406) User Direction of Feed K1 = 2.00 (0.079) NOTE: Tape dimensions not shown, comply with JEDEC Standard EIA-481-2 Dimensions: mm (inches) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-OAA160-R06 ©Copyright 2006, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 10/20/06