S3A - S3M 3.0A SURFACE MOUNT GLASS PASSIVATED RECTIFIER Features Glass Passivated Die Construction Low Forward Voltage Drop and High Current Capability Surge Overload Rating to 100A Peak Ideally Suited for Automatic Assembly A Mechanical Data SMB B Case: Molded Plastic Case Material - UL Flammability Rating Classification 94V-0 Moisture sensitivity: Level 1 per J-STD-020A Terminals: Solder Plated Terminal - Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band or Cathode Notch Weight: SMB 0.093 grams (approx) SMC 0.21 grams (approx) Marking: Type Number & Date Code, See Page 2 Ordering Information: See Page 2 C D J Min Max Min Max A 3.30 3.94 5.59 6.22 B 4.06 4.57 6.60 7.11 C 1.96 2.21 2.75 3.18 D 0.15 0.31 0.15 0.31 E 5.00 5.59 7.75 8.13 G 0.10 0.20 0.10 0.20 H 0.76 1.52 0.76 1.52 J 2.00 2.62 2.00 2.62 G E H SMC Dim All Dimensions in mm AB, BB, DB, GB, JB, KB, MB Suffix Designates SMB Package A, B, D, G, J, K, M Designates SMC Package Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TT = 75°C Symbo S3 A/AB S3 B/BB S3 D/DB S3 G/GB S3 J/JB S3 K/KB S3 M/MB Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 30 70 140 280 420 560 700 V IO 3.0 A Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 100 A Forward Voltage VFM 1.15 V IRM 10 250 µA CT 40 pF RJT 10 °C/W Tj, TSTG -65 to +150 °C Peak Reverse Current at Rated DC Blocking Voltage @ IF = 3.0A @TA = 25°C @ TA = 125 °C Typical Total Capacitance (Note 1) Typical Thermal Resistance Junction to Terminal (Note 2) Operating and Storage Temperature Range Notes: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 2. Thermal resistance: Junction to Terminal, unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pad as heat sink. Ordering Information (Note 3) Packaging Shipping S3xB-13 S3x-13 SMB SMC 3000/Tape & Reel IAV, AVERAGE FORWARD CURRENT (A) 3.0 Resistive or Inductive Load 2.5 2.0 1.5 1.0 0.5 0 25 50 75 100 125 150 IF, INSTANTANEOUS FORWARD CURRENT (A) Device* 10 1.0 0.1 IF PULSE WIDTH = 300 µS 0.01 0 TT, TERMINAL TEMPERATURE (ºC) Fig. 1 Forward Current Derating Curve 100 80 60 40 20 0 NUMBER OF CYCLES AT 60 Hz Fig. 3 Forward Surge Current Derating Curve IR, INSTANTANEOUS REVERSE CURRENT (µA) IFSM, PEAK FORWARD SURGE CURRENT (A) Single Half-Sine-Wave JEDEC Method 10 0.8 1.2 1.6 2.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 120 1 0.4 1000 100 Tj = 125°C 10 1.0 Tj = 25°C 0.1 0.01 0 20 40 60 80 100 120 140 100 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics