SSMB Series SSMB Type Connectors ●SSMB series are super mini-size low profile, push-on type coaxial cable connectors pro duced corresponding to minimization of communication equipment, and based on IEC-Pub.16919 Standard. ●When fitted, the height from print base is less than 6mm(in combination of SP and LR) or less than 10mm(in combination of LP and SR). CONFORMING STANDARD IEC-Pub． 169-19 SPECIFICATION Characteristic Impedance 50Ω Dielectric withstanding voltage 500V AC (rms) for 1 minute Insulation resistance 1000MΩ min. at 250V DC Contact resistance 7.5mΩ max. VSWR 1.3max. at DC～2GHz Specifications depends on each connector although these are basic specifications. MATERIAL/FINISH Shell (Body) Copper alloy/Nickel plating Contact (male) Copper alloy/Gold plating Contact (female) Copper alloy/Gold plating Insulators PTFE Please ask us for the cable assemblies to assure its performance. ● 1● SSMB Series Unit : mm φA ■ Plug P/N SSMB-SP-0.8DV-CR SSMB-SP-196U SSMB-SP-1.5QEW φ5 L φA L 5.0 5.0 5.5 13.9 17.3 15.8 P/N Applicable Cable SSMB-SP-85-SO 10.5 Applicable Cable 0.8D-QEV RG-196A/U 1.5D-QEW FCCAVG1 Shell Au Au Au Shell Au Finish Contact Au Au Au Hand Crimp Tool P/N CR-H-13510 CR-H-1164 CR-H-1133 Finish Contact Au ■ Right Angle Plug A 5.0 Applicable Cable SSMB-LP-0.8DQEV 7.73 3.0 13.5 0.8D-QEV SSMB-LP-196U 7.73 3.0 13.5 RG-196A/U SSMB-LP-1.5QEW 8.48 4.5 12.4 1.5D-QEW C P/N A B C Finish Shell Contact Au Au Au Au Au Au Hand Crimp Tool P/N CR-H-1164 CR-H-1164 CR-H-1133 φB 5.0 P/N Applicable Cable 8 SSMB-LP-85-SO 9.05 FCCAVG1 Shell Au Finish Contact Au φ4 5 SSMB-SR-PC 5.2 2.5 Mounting Dimensions Hole 5-φ1.2 ± 0.05 5.2 4-□0.6 5 9.23 (11.73) 5.7 2.5 SSMB-SR-PC-1 2.5 P/N SSMB-LR-PC φ0.65 4-□0.6 P/N Finish Shell Contact Au Au Shell Au Finish Contact Au Shell Au Finish Contact Au 11.5 5 φ φ2.15 φ0.65 .8 16 2-φ2.75 6.1 12.2 P/N SSMB-SR2 1.5 5 6.7 7 13.7 5.8 ● 2 ● 2.2 ± 0.05 8.5 φ0.65 4-□0.6 Finish Shell Contact Au Au P/N 4.4 ± 0.05 φ0.65 ■ Receptacle 2.2 ± 0.05 4.4 ± 0.05