27CP Series 75Ω SMB Type Connectors ●27CP series are connectors for 75 Ω group of 27DP series (50Ω group). ●Typical small size 75 Ω connectors useful for interface within equipment. ●Provides easy push-pull coupling mechanism. ●27DP series is not intermateable with. ●Useful for interface of test instrument, broad- casting equipment, CATV and HDTV, atc. SPECIFICATION Characteristic Impedance 75Ω Dielectric withstanding voltage 1000V AC (rms) for 1 minute Insulation resistance 1000MΩmin. at 500V DC Contact resistance 6mΩ max. VSWR 1.5max. at DC～500MHz Specifications depends on each connector although these are basic specifications. MATERIAL/FINISH Shell (Body) Copper alloy/Gold or Nickel plating Contact (male) Copper alloy/Gold plating Contact (female) Copper alloy/Gold plating Insulators PTFE Please ask us for the cable assemblies to assure its performance. ● 1● 27CP Series Unit : mm ■ Plug φ5.5 P/N φ10 φ5.9 L Finish Shell Contact Hand Crimp Tool P/N 27CP-P-1.5 1.5C-2V Ni Au CR-H-1100 27CP-P-1.5W 1.5C-2W Ni Au CR-H-1100 27CP-P-2.5 2.5C-2V Ni Au CR-H-1100 Applicable Cable φA L 27CP-SP-2.5C2V-CR1 2.5C-2V 5.90 27CP-SP-2.5C2W-CR1 2.5C-2W 6.25 27CP-SP-3C2V-CR1 3C-2V 27CP-SP-3C2W-CR1 3C-2W P/N φ7.44 φA φ8.0 16.5 Applicable Cable Finish Shell Contact Hand Crimp Tool P/N 19.3 Au Au CR-H-1163 23.5 Au Au CR-H-1105 7.00 23.5 Au Au CR-H-1102 7.60 23.5 Au Au CR-H-1103 Finish P/N Applicable Cable Shell Contact Hand Crimp Tool P/N 27CP-SP-2.5C2V-CR1-2 2.5C-2V Au Au CR-H-1163 P/N Applicable Cable Shell Contact Hand Crimp Tool P/N 27CP-SP-2.5C2W-CR1-2 2.5C-2W Au Au CR-H-1105 8 φ9.6 φ6.25 20.3 12.8 24.1 ● 2● Finish 27CP Series Unit : mm ■ Right Angle Plug 7.9 P/N L1 27CP-LP-1.5 27CP-LP-1.5W φA L1 8 φ10 L2 φA Applicable Cable φA L1 L2 1.5C-2V 5.5 14.40 5.5 1.5C-2W 1.5C-2WX Finish Shell Contact Hand Crimp Tool P/N 15.5 Ni Au CR-H-1100 14.35 15.5 Ni Au CR-H-1100 27CP-LP-2.5W 2.5C-2W 6.0 14.35 15.5 Ni Au CR-H-15285 27CP-LP-2.5 2.5C-2V 5.5 14.40 15.5 Ni Au CR-H-1100 P/N Applicable φA Cable L1 Finish L2 Shell Contact Hand Crimp Tool P/N CR-H-1102 27CP-LP-3C2V-CR1 3C-2V 7.0 20.5 16.9 Ni Au 27CP-LPS-1.5W-D 1.5C-2W 5.5 16.4 16.0 Ni Au CR-H-1100 CR-H-16776 7.6 L2 φ5.5 φ6.2 ■ Jack 15.2 Finish Applicable Cable Shell Contact Hand Crimp Tool P/N 27CP-J-1.5 1.5C-2V Ni Au CR-H-1100 27CP-J-2.5 2.5C-2V Ni Au CR-H-1100 P/N ■ Bulkhead Jack Applicable Cable φA L 27CP-BJ-1.5 1.5C-2V 5.5 27CP-BJ-1.5W 1.5C-2W 5.5 27CP-BJ-2.5 2.5C-2V 27CP-BJ-2.5W 2.5C-2W φA P/N 6.5 9.5 L Mounting Hole Panel Thickness:2.4 Max. 5.2 1.2 φ8.4 ● 3● Finish Shell Contact Hand Crimp Tool P/N 17.10 Ni Au CR-H-1100 17.07 Ni Au CR-H-1100 5.5 17.10 Ni Au CR-H-1100 6.0 17.00 Ni Au CR-H-15285 27CP Series Unit : mm ■ Bulkhead Receptacle φ0.65 P/N 27CP-BR 0.5 10.7 9.5 Max.Panel Thickness:2.4 14.8 Mounting Hole 5.2 1.2 φ8.4 ● 4 ● Finish Shell Contact Ni Au 27CP Series Unit : mm ■ Right Angle Receptacle 7.5 11.5 27CP-LR-PC Finish Shell Contact Ni Au 2.9 14.4 P/N 4- □ 0.8 15.5 □ 5.08 □8 2.54 ± 0.05 5.08 ± 0.1 2.54 ± 0.05 PCB Mounting Domensions 5-φ1.3 +0.1 -0 5.08 ± 0.1 ■ Receptacle □ 0.8 φ0.97 P/N 1.27 27CP-R-PC 5.08 7.5 8.0 10.4 2.54 ± 0.05 5.08 ± 0.1 2.54 ± 0.05 PCB Mounting Domensions 5-φ1.3 +0.1 -0 5.08 ± 0.1 ● 5 ● Finish Shell Contact Ni Au