Embedded Power for Business-Critical Continuity Rev.02.16.07 NFS80 Series 1 of 4 NFS80 Series Quad output Total Power: 80 - 110W Input Voltage: 90 - 264VAC 120 - 370VDC # of Outputs: Quad Special Features • 7.0 x 4.25 x 1.8 inch package • Overvoltage and short circuit protection • 80 W with free air convection • Adjustable outputs • Isolated output • Floating fourth output • EN55022, EN55011 conducted emissions level B • UL, VDE and CSA safety approvals • Available RoHS compliant • 2 year warranty Safety VDE0805/EN60950/ IEC950/IEC1010 File No. 10401-3336-0213 Licence No. 40014677 UL1950 File No. E136005 CSA C22.2 No. 950 File No. LR41062C The NFS80 series is a 80 W universal input ac-dc power supply on a 7 x 4.25 inch card. The NFS80 series has two quad output models with a very high peak capability on the auxiliary outputs for drive and motor applications. The NFS80 provides 80 W of output power with free air convection cooling which can be boosted to 110 W with 20 CFM of forced air. Standard features include overvoltage and short-circuit protection. The series, with full international safety approval and the CE mark, meets conducted emissions EN55022 level B. The NFS80 series is designed for use in low power data networking, computer, telecom and industrial applications such as servers, PABX's, storage devices, vending machines and printers. Embedded Power for Business-Critical Continuity Rev.02.16.07 NFS80 Series 2 of 4 Specifications All specifications are typical at nominal input, full load at 25°C unless otherwise stated OUTPUT SPECIFICATIONS EMC CHARACTERISTICS (11,C) Output voltage adjustability +5 V output on multi’s Vout on singles Line regulation LL to HL, FL Main output Auxiliary outputs Total regulation (See Note 5) Overshoot/undershoot At turn-on Transient response +5 V (1 A to 12 A) Temperature coefficient All outputs ±0.1% max. ±0.1% max. See table 0% ±0.02%/°C +5 V output Minimum output current See derating curve Main output Auxiliary output Output power limit Primary power limit 140% Vout max. 1A 0A 160 W Pin max. 110 W Pout min. Yes with auto recovery INPUT SPECIFICATIONS Input voltage range Surge Fast transients Radiated immunity Conducted immunity Hold-up time Input frequency range 90-264 Vac 120-370 Vdc 47-440 Hz Input surge current 115 Vac, cold start 230 Vac, cold start Safety ground leakage current 110 Vac, 60 Hz 230 Vac, 50 Hz 110 Vac, @ 80 W 110 Vac, @ 110 W 230 Vac, @ 80 W 230 Vac, @ 110 W Efficiency Isolation voltage 3000 Vac 1500 Vac VDE0805, EN60950, IEC950 IEC1010, UL1950 CSA C22.2 No. 950 Weight 600 g (21.18 oz) MIL-HDBK-217E @ 25 °C EN55022,FCC part 15 EN55022 FCC part 15 EN61000-4-2, level 3 EN61000-4-2, level 4 Thermal performance 0.2 mA 0.4 mA Level B Level B Perf. criteria 1 Perf. criteria 1 250,000 hours ENVIRONMENTAL SPECIFICATIONS Operating, see curve Non-operating 50 °C to +70 °C natural convection 50 °C to +70 °C 20 CFM forced air cooling Relative humidity Conducted emissions Radiated emissions ESD air ESD contact 35 ms 17 ms 140 ms 100 ms 20-70 kHz Approvals and standards (See Note 10) 19 A 38 A EMC CHARACTERISTICS (11,C) Perf. criteria 1 Perf. criteria 1 Perf. criteria 1 Perf. criteria 1 70% typical Input/output Input/chassis Switching frequency MTBF (See Note 7) Universal input EN61000-4-5, level 3 EN61000-4-4, level 3 EN61000-4-3, level 3 EN61000-4-6, level 3 GENERAL SPECIFICATIONS ±150 mV peak 1 ms recovery Overvoltage protection Short circuit protection ±3.0% 0 °C to +70 °C –40 °C to +85 °C Derate 2 W/°C Derate 2.75 W/°C 5% to 95% RH Altitude Operating Non-operating Vibration (See Note 9) 5-500 Hz 10,000 feet max. 30,000 feet max. 2.4 G rms approx. Embedded Power for Business-Critical Continuity Rev.02.16.07 NFS80 Series 3 of 4 Specifications Contd. OUTPUT CURRENTS OUTPUT VOLTAGE MAX +5 V (IA) RIPPLE (4) TOTAL REGULATION (5) MODEL NUMBER (12,13,E) 15 A 50 mV ±2.0% NFS80-7602J 3A 2.5 A 240 mV +10.0/-5.0% 6A 3A 120 mV ±3.0% PEAK (2) FAN (3) 8A 20 A +24 V (IB) 2A +12 V 2.5 A ±12 V (1) 2.5 A 6A 3A 120 mV ±3.0% +5 V (IA) 8A 20 A 15 A 50 mV ±2.0% +24 V (IB) 2A 3A 2.5 A 240 mV +10.0/-5.0% +15 V 2.5 A 6A 3A 150 mV ±3.0% ±15 V (6) 2.5 A 6A 3A 150 mV ±3.0% (6) NFS80-7606J Notes 1 2 3 4 5 6 7 8 9 10 11 12 13 Natural convection cooling. Peak output current lasting less than 60 seconds with duty cycle ≤10%. During peak loading, outputs may exceed total regulation limits. Forced air cooling, 20 CFM @ 1 atmosphere. 50 MHz bandwidth, peak-to-peak, measured differentially. Total regulation is defined as the static output regulation at 25 °C, including initial tolerance, line voltage within stated limits, load currents within stated limits, and output voltages adjusted to their factory settings. Also, for stated regulation on the +24 V output, IA / IB ≤ 5. Pins 10 and 11 are a floating output, which can be referenced as either positive or negative. Pin 10 is positive with respect to pin 11. Either pin 10 or 11 must be connected to return (pins 4-7) for proper operation. Derating curve is application specific for ambient temperatures > 50 °C, for optimum reliability, no part of the heatsink should exceed 110 ºC and no semiconductor case temperature should exceed 115 ºC. Caution: Allow a minimum of 1 second after disconnecting the power when making thermal measurements. Three orthogonal axes, random vibration, 10 minute test for each axis. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. For EMI compliance unit may need to be mounted on a metal chassis. The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. DERATING CURVE Output Power (Watts) 110W 20 CFM FORCED AIR COOLING 80W NATURAL CONVECTION COOLING 55W 40W 5W MINIMUM LOAD NECESSARY 5W 0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C Embedded Power for Business-Critical Continuity Rev.02.16.07 NFS80 Series 4 of 4 Americas 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 16th - 17th Floors, Lu Plaza 2 Wing Yip Street, Kwun Tong Kowloon, Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.powerconversion.com [email protected] While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2007 Emerson Electric Co.