BYT52MGR SINTERED GLASS JUNCTION FAST SWITCHING PLASTIC RECTIFIER VOLTAGE: 1000V CURRENT: 1.4A FEATURE DO-15 High temperature metallurgic ally bonded construction Sintered glass cavity free junction Capability of meeting environmental standard of MIL-S-19500 High temperature soldering guaranteed 350°C /10sec/0.375”lead length at 5 lbs tension MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL BYT52MGR units Maximum Recurrent Peak Reverse Voltage VRRM 1000 V Maximum RMS Voltage VRMS 700 V Maximum DC blocking Voltage VDC 1000 V Maximum Average Forward Rectified Current at I=10mm Peak Forward Surge Current at Tp=10ms half sinewave Maximum Forward Voltage at Forward Current 1.0A and 25°C Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =150°C IFAV 1.4 A IFSM 50.0 A VF 1.30 V IR 5.0 150 µA µA Maximum Reverse Recovery Time (Note 1) Trr 200 nS Typical Thermal Resistance (Note 2) Rth(ja) 100 K/W Storage and Operating Junction Temperature Tstg, Tj -55 to +175 ℃ Note: 1. Reverse Recovery Condition IF=0.5A, IR=1.0A, IRR=0.25A 2. on P.C. board with spacing 20mm Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES BYT52MGR Rev.A1 www.gulfsemi.com