FK1K SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE： ：700V CURRENT： ： 1.0A SMA／ ／DO-214AC FEATURE Ideal for surface mount pick and place applications Low profile package Built-in strain relief High surge capability Glass passivated chip Fast recovery time for high efficiency MECHANICAL DATA Terminal：Solder plated, solderable per MIL-STD750, Method 2026 High temperature soldering guaranteed: 250°C/10 seconds at terminals Case： JEDEC DO-214AC(SMA) molded plastic body Polarity： color band denotes cathode Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8″lead length at Ta=90℃ Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated forward current Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Maximum Reverse Recovery Time (Note1 ) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature SYMBOL FK1K units Vrrm 700 V Vrms 490 V Vdc 700 V If(av) 1.0 A Ifsm 30.0 A Vf 1.3 V Ir 5.0 300.0 μA μA Trr 400 nS Cj 10.0 pF R(ja) 32.0 ℃ /W Tstg, Tj -50 to +150 ℃ Note： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to terminal mounted on 5×5mm copper pad area Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES FK1K 1 1 Rev.A1 www.gulfsemi.com