GPP6J GLASS PASSIVATED JUNCTION RECTIFIER VOLTAGE: 600V CURRENT: 6.0A FEATURE P600\R-6 High current capability Low forward voltage drop High surge current capability Glass Passivated chip MECHANICAL DATA Cases: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Axial leads, solderable per MIL-STDLead: 202, Method 208 guaranteed Polarity: color band denotes cathode High temperature soldering guaranteed: 250°C/10 seconds/.375”,(9.5mm) lead lengths at 5 lbs.,(2.3kg) tension Mounting position: any Weight: 2.0 grams(about) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8" lead length at TL =50°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated forward current @6.0A Maximum DC Reverse Current at rated DC blocking voltage Typical Junction Capacitance Ta =25°C Ta =125°C (Note 1) Storage and Operating Junction Temperature SYMBOL GPP6J units Vrrm Vrms Vdc 600 420 600 V V V If(av) 6.0 A Ifsm 300.0 A Vf 1.0 V 10.0 100.0 100 -55 to +150 µA µA Ir Cj Tstg, Tj pF °C Note: 1. Rev.A1 Measured at 1.0 MHz and applied voltage of 4.0Vdc www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES GPP6J Rev.A1 www.gulfsemi.com