ETC APM-B3D1

6
Specifications
APM Series
Compact Proximity Sensors
FEATURES
Compact Proximity Sensors Can be Installed Anywhere.
Locking Boss Ensures Easy Mounting.
•
•
•
•
•
click
This thin 5.9mm (side sensing type) sensor takes up little space.
8mm wide, compact with a 2.5mm sensing range.
Locking boss allows easy mounting by single screw. Mounting bracket not
required. (locking boss type)
Indicator lamp visible from all three directions allows easy checking of the
operating state.
Wide variety of sensor types support all kinds of applications.
ORDER GUIDE
• DC 3-wire type
Appearance
Sensor package style
Top sensing type
Dimensions (mm)
W D H
8
D
Sensing
distance
(mm)
Location
of sensing
face
Locking
boss
H
Output/operation mode
(open collector)
NPN
Not
provided
(sensing face)
D=5.9
H=9.4
(body)
D=21.6
H=5.9
PNP
Top
NPN
Provided
PNP
Side sensing type
NPN
Not
provided
2.5
PNP
8
25
5.9
Side
NPN
Provided
PNP
Side sensing type
8
25
7.5
Not
provided
NPN
Provided
NPN
Side
N.O.
Catalog listing
APM-A3A1
N.C.
APM-A3B1
N.O.
APM-A3D1
N.C.
APM-A3E1
N.O.
APM-B3A1
N.C.
APM-B3B1
N.O.
APM-B3D1
N.C.
APM-B3E1
N.O.
APM-C3A1
N.C.
APM-C3B1
N.O.
APM-C3D1
N.C.
APM-C3E1
N.O.
APM-D3A1
N.C.
APM-D3B1
N.O.
APM-D3D1
N.C.
APM-D3E1
N.O.
APM-C3A1-S
N.C.
APM-C3B1-S
N.O.
APM-D3A1-S
N.C.
APM-D3B1-S
Note:
Different-frequency types also available for all models. These types are appended with the letter ‘‘-F’’ is used.
Example: Different-frequency type of APM-C3A1 is expressed as APM-C3A1F.
‘‘Different-frequency type’’ is a type having an oscillation frequency different to that of the standard type to reduce the influence of mutual interference. Select this type when mounting two or more proximity sensors close to each other.
For details, contact your nearest Yamatake dealer.
1
No. CP-PC-2173E
• DC 2-wire type
Appearance
Sensor package style
Top sensing type
Dimensions (mm)
W D H
Sensing
distance
(mm)
8 D H
(sensing face)
D=5.9 H=9.4
(body)
D=21.6 H=5.9
Location
of sensing
face
Locking
boss
Operation
mode
Not
provided
N.O.
APM-A3J1
N.C.
APM-A3K1
Top
Provided
Side sensing type
Not
provided
8
25
2.5
5.9
Side
Provided
Side sensing type
Not
provided
8
25
7.5
Side
Provided
Catalog listing
N.O.
APM-B3J1
N.C.
APM-B3K1
N.O.
APM-C3J1
N.C.
APM-C3K1
N.O.
APM-D3J1
N.C.
APM-D3K1
N.O.
APM-C3J1-S
N.C.
APM-C3K1-S
N.O.
APM-D3J1-S
N.C.
APM-D3K1-S
SPECIFICATIONS
• DC 3-wire type
Item
Standard catalog listing
APM- 3A1
(-S)
APM- 3B1
12/24Vdc
Rated supply voltage
2.5mm,
Rated sensing distance
15
Standard target object
10.8 to 26.4Vdc (ripple voltage 10% max.)
Operating voltage range
10mA max.
Current consumption
NPN transistor open collector
Normally open (N.O.)
Normally open (N.O.)
Normally closed (N.C.)
30mA max. (resistive load)
1V max. (switching current 30mA)
Voltage drop
26.4V
Output dielectric strength
120Hz
Operating frequency
0.05mm max.
Hysteresis
Supply voltage characteristics
PNP transistor open collector
Normally closed (N.C.)
Switching current
Temperature characteristics
15mm, 1mm thick iron
15% max. of sensing distance
Differential travel
Control
output
15%
0 to 1.8mm
Usable sensing distance
Operation mode
APM- 3E1
High-frequency oscillation type (unshielded type)
Actuation method
Output mode
APM- 3D1
(-S)
15% max. for the range of ~10 to +55˚C when +25˚C is taken as standard temperature in sensing distance
2% max. with
10% voltage fluctuation with rated supply voltage as standard voltage in sensing distance
Lights (red) when object approaches
Indicator lamps
Operating temperature range
~10 to +55˚C
Storage temperature range
~25 to +70˚C
35 to 85% RH
Operating humidity range
50M min. (by 500Vdc megger)
Insulation resistance
Dielectric strength
1,000Vac, 50/60Hz for 1 minute between case and electrically live metals
Vibration resistance
10 to 55Hz, 1.5mm peak-to-peak amplitude, 2hrs in X, Y and Z directions
Shock resistance
500m/s2 3 times in X, Y and Z directions
IP67 (IEC 529)
Protection
Approx. 10g
Weight
Circuit protection
Wiring method
Surge absorption, reverse connection protection circuit
Pre-leaded (oil-resistant cord: 2.5mm O.D., 0.08mm2, 3-core, 1m)
Polyalylate resin
Case material
0.5N-m (M2.6 screw)
Tightening torque
• Installation Instructions No.: CP-UM-3162E
Note:
Normally open: Load operates when object approaches the sensor (output circuit ON when detected).
Normally closed: Load is reset when object approaches the sensor (output circuit ON when not detected).
2
• DC 2-wire type
Stanard catalog listing
APM- 3J1(-S)
APM- 3K1(-S)
High-frequency oscillation type (unshielded type)
Actuation method
12/24Vdc
Rated supply voltage
2.5mm,
Rated sensing distance
15
Standard target object
10 to 30Vdc
Operating voltage range
0.65mA max. (24Vdc)
Leakage current
Control
output
15mm, 1mm thick iron
7% max. of sensing distance
Differential travel
Operation mode
Normally open (N.O.)
Normally open (N.O.)
3 to 50mA
Switching current
3V max.
Voltage drop
30Vdc
Output dielectric strength
1,500Hz
Operating frequency
Temperature characteristics
Supply voltage characteristics
Indicator lamps
15%
0 to 1.8mm
Usable sensing distance
10% max. for the range of ~10 to +55˚C when +25˚C is taken as standard temperature in sensing distance
15% max. for the range of ~25 to +70˚C when +25˚C is taken as standard temperature in sensing distance
2% max. with
10% voltage fluctuation with rated supply voltage as standard voltage in sensing distance
Lights (red) when object approaches
~10 to +55˚C (Note 1)
Operating temperature range
~25 to +70˚C
Storage temperature range
50M min. (by 500Vdc megger)
Insulation resistance
Dielectric strength
1,000Vac, 50/60Hz for 1 minute between case and electrically live metals
Vibration resistance
10 to 55Hz, 1.5mm peak-to-peak amplitude, 2hrs in X, Y and Z directions
Shock resistance
500m/s2 3 times in X, Y and Z directions
IP67 (IEC 529)
Protection
Approx. 10g
Weight
Circuit protection
Surge absorption, reverse connection protection circuit
Wiring method
Pre-leaded (oil-resistant cord: 2.5mm O.D., 0.08mm2, 3-core, 1m)
Case material
Polyalylate resin
0.5N-m (M2.6 screw)
Tightening torque
• Installation Instructions No.: CP-UM-3162E
Note 1: ~25 to +70˚C when APM-PA01 mounting bracket (sold separataly) is used.
3
WIRING DIAGRAMS
• DC 3-wire type
•
NPN transistor, open collector type
(Catalog listing APM- 3A1 , APM- 3B1 )
•
PNP transistor, open collector type
(Catalog listing APM- 3D1 , APM- 3E1 )
• DC 2-wire type
•
All catalog listing
The load can be connected to either of the power supplies.
SENSING AREA DIAGRAMS (typical examples)
• Side sensing type
• Top sensing type
SENSING DISTANCE ACCORDING TO MATERIAL & SIZE OF OBJECT (typical example)
4
EXTERNAL DIMENSIONS
• Top sensing type
•
(unit: mm)
Without locking boss
•
With locking boss
- Vinyl-insulated cord
(oil-resistant: 0.1mm2, 0.08/16, 3-core) 2.5mm dia.
- DC 2-wire type: 2 cores
- Vinyl-insulated cord
(oil-resistant: 0.1mm2, 0.08/16, 3-core) 2.5mm dia.
- DC 2-wire type: 2 cores
• Side sensing type
•
Without locking boss
•
- Vinyl-insulated cord
(oil-resistant: 0.1mm2, 0.08/16, 3-core) 2.5mm dia.
- DC 2-wire type: 2 cores
With locking boss
- Vinyl-insulated cord
(oil-resistant: 0.1mm2, 0.08/16, 3-core) 2.5mm dia.
- DC 2-wire type: 2 cores
• Side sensing type (-S)
•
Without locking boss
•
- Vinyl-insulated cord
(oil-resistant: 0.1mm2, 0.08/16, 3-core) 2.5mm dia.
With locking boss
- Vinyl-insulated cord
(oil-resistant: 0.1mm2, 0.08/16, 3-core) 2.5mm dia.
5
PRECAUTIONS
• Mounting
This sensor is provided with an M2.6 screw (neck length 12mm),
hexagonal head unit, plain washer and spring washer.
Tighten the screw to the torque shown below.
Allowable tightening
torque
Recommended screw
diameter
0.5N-m
M2.6
• Influence of surrounding metal
Metal other than the object surrounding the sensor may influence operating characteristics. Maintain the following space
between the sensor and surrounding metal:
Side (mm)
Top (mm)
A=3
B=8, C=10
Side sensing type
Top sensing type
Side sensing type
Facing each other
isolation
A (mm)
B (mm)
Side sensing type
20(0)
40(10)
Top sensing type
20(0)
40(10)
• Operation at power ON
After the power is turned ON, it takes 40ms or less until the
proximity sensor is ready for sensing.
When the load and the proximity sensor use different power
supplies, be sure to turn the proximity sensor ON before turning
the load ON.
• Minimum cord bending radius (R)
Top sensing type
The minimum bending radius (R) of the cord is 10mm. Take care
not to excessively bend the cord beyond this radius. Also, do not
excessively bend the cord within 30mm of the cord lead-in port.
• Mutual interference prevention
When mounting proximity sensors in parallel or facing each
other, mutual interference may cause the sensor to malfunction.
Maintain at least the spaces indicated in the figures above.
When alternately mounting standard-frequency types and
different-frequency types (Catalog listing APM- 3 1F) in a
row, maintain at least the space indicated by the figure in
parentheses for both dimensions A and B.
RESTRICIONS ON USE
This product has been designed, developed and manufactured for
general-purpose application in machinery and equipment. Accordingly,
when used in applications outlined below, special care should be taken
to implement a fail-safe and/or redundant design concept as well as a
periodic maintenance program.
- Safety devices for plant worker protection
Start/stop control devices for transportation and material
handling machines
- Aeronautical/aerospace machines
- Control devices for nuclear reactors
Never use this product in applications where human safety may be put
at risk.
(01)
6
Printed in Japan (SP)
1st Edition: lssued in Apr., 2002
2nd Edition: Issued in Oct., 2003
Similar pages
PDF