T-1, (3-mm) Round, PCB Mount Right Angle Array, G261B Series www.ledidea.com The G261B is a T-1 size right-angle indicator array. The LEDs are located 0.2" from the PCB. It is designed to be physically interchangeable with many other manufacturers. This series can also be supplied with pinout reversed from that shown by adding “-RL” to the order code of the part number. The holder is made from black plastic with a flammability rating of UL94-V0. 2.5±.5 4.3 (.17) 5.08 (.200) 3 typ 7.1 (.280) IDEA 6.35 (.250) IDEA 3.5 min 4.4 (.175) Pin Assignment + – (typ for single color) Red or yellow Anode 2.54(0.10) Green Anode (typ for bi-color) Specify part desired as follows: G261B/Order Code For example: “G261B/G” designates an assembly with a green LED. “G261B/EG-RL” designates a red/green bi-color assembly with pins reversed ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type TInted Diffused Resistor Required Tinted Transparent High Brightness Tinted Diffused For 2mA Operation Tinted Diffused 5V Operation White Diffused Bipolar, Bicolor Color Typical Characteristics Order Code Peak Vf (V) Iv (mcd) 2Θ1/2 λ (nm) @If=20mA @If=10mA (Deg) Recom. Op. If (mA) Hi Eff Red I 635 2.0 10 60 10-20 Green G 565 2.1 10 60 10-20 Yellow Y 585 2.0 10 60 10-20 10-20 Orange O 610 2.0 10 60 Hi Eff Red IT 635 2.0 40 40 10-20 Green GT 565 2.1 40 40 10-20 10-20 Yellow YT 585 2.0 40 40 Hi Eff Red I2 635 2.0 1.0 @ 2mA 60 2-10 Green G2 565 2.1 1.0 @ 2mA 60 2-10 2-10 Yellow Y2 585 2.0 1.0 @ 2mA 60 Hi Eff Red I5 635 - 10 60 5V Green G5 565 - 10 60 5V Yellow Y5 585 - 10 60 5V Red/Green EG 635/565 2.0/2.1 4/4 90 10-20 Yellow/Green YG 585/565 2.0/2.1 4/4 90 10-20 Red/Yellow EY 635/585 2.0/2.0 4/4 90 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 2005G