IDEA J261B

T-1, (3-mm) Round, PCB Mount
Right Angle Array, J261B Series
The J261B is a T-1 size right-angle indicator array and can be CMOS driven to save components. The LEDs are located 0.2" from the
PCB. It is designed to be physically interchangeable with many other manufacturers. This series can also be supplied with pinout
reversed from that shown by adding “-RL” to the order code of the part number. The holder is made from black plastic with a flammability
rating of UL94-V0.
2.5±.5
4.3
(.17)
5.08
(.200)
3 typ
7.1
(.280)
IDEA
6.35
(.250)
IDEA
3.5 min
4.4
(.175)
Pin Assignment
+ –
(typ for single color)
Red or
yellow
Anode
2.54(0.10)
Green
Anode
(typ for bi-color)
Specify part desired as follows:
J261B/Order Code
For example:
“J261B/G” designates an assembly with a green LED.
“J261B/EG-RL” designates a red/green bi-color assembly with pins reversed.
ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT)
LED Lamp
Epoxy & Type
TInted Diffused
Typical Characteristics
Peak
Vf (V)
Iv (mcd)
2Θ1/2
λ (nm)
@If=20mA
@If=2 mA
(Deg)
Recom.
Op. If
(mA)
1.8
4.0
50
2 - 10
Color
Order Code
Red
I
639
Green
G
575
1.7
2.5
60
2 - 10
Yellow
Y
591
1.85
4.0
45
2 - 10
* Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise.
IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A