MEANWELL SPR01O-05

SPR01
1W DC-DC Regulated Single Output Converter
series
Features :
1000VDC I/O isolation
Internal SMD technology
Built-in EMI filter
Cooling by free air convection
Non-conductive plastic case
Single in line package
DIP packge is available
100% burn-in test
Low cost / High reliability
Approvals: FCC / CE
2 years warranty
SELECTION GUIDE
ORDER NO.
SPR01L-05
SPR01M-05
SPR01N-05
SPR01O-05
DC OUTPUT VOLTAGE
5V
INPUT CURRENT RANGE
0 ~ 200mA
EFFICIENCY
57%
65%
62%
62%
SPR01L-12
SPR01M-12
SPR01N-12
SPR01O-12
DC OUTPUT VOLTAGE
12V
INPUT CURRENT RANGE
0 ~ 84mA
EFFICIENCY
58%
ORDER NO.
SPR01L-09
SPR01M-09
SPR01N-09
SPR01O-09
57%
60%
60%
56%
SPR01L-15
SPR01M-15
SPR01N-15
SPR01O-15
9V
0 ~ 100mA
15V
0 ~ 67mA
60%
60%
58%
60%
62%
60%
58%
10.8 ~ 13.2V
12V
21.6 ~ 26.4V
24V
43.2 ~ 52.8V
48V
4.5 ~ 5.5V
5V
10.8 ~ 13.2V
12V
21.6 ~ 26.4V
24V
43.2 ~ 52.8V
48V
141mA
67mA
35mA
350mA
141mA
67mA
35mA
15mA
10mA
6mA
32mA
15mA
10mA
6mA
SPECIFICATION
RATED POWER
1W
RIPPLE & NOISE (max.) Note.2 100mVp-p
LINE REGULATION
1.0%
LOAD REGULATION
Note.3 1.0%
VOLTAGE ACCURACY
50KHz min.
VOLTAGE RANGE
NORMAL VOLTAGE
4.5 ~ 5.5V
5V
Full load 350mA
No load 32mA
INPUT CURRENT
INPUT
FILTER
Momentary
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVERLOAD
PROTECTION
Momentary
SHORT CIRCUIT
WORKING TEMP.
Protection type : Hiccup mode, recovers automatically after fault condition is removed
-25 ~ +71 (Refer to output load derating curve)
WORKING HUMIDITY
20% ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
SAFETY &
ISOLATION CAPACITANCE
EMC
EMI CONDUCTION & RADIATION
EMS IMMUNITY
OTHERS
-25 ~ +105 , 10 ~ 95% RH
0.03% / (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
I/P-O/P:1KVDC
I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH
80pF max.
Compliance to EN55022 Class B, FCC part 15 Class B
Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A
MTBF
DIMENSION
700khrs min. MIL-HDBK-217F(25 )
19.6*7.1*10.2mm or 0.77"*0.28"*0.40" inch (L*W*H)
WEIGHT
2.3g
Unit: mm (inch)
10.14 (0.40)
19.6 (0.77)
3.81 (0.15)
7.1 (0.28) 1 2
FRONT VIEW
5.08 (0.20)
0.5 (0.02)
4
Derating Curve
Pin Configuration
Mechanical Specification
6
1.2 (0.05)
NOTE
3.0%(max.)
Capacitor type
Fuse recommended
PROTECTION
(Note. 4)
2.0%(Typ.)
SWITCHING FREQUENCY
Pin No.
Output
1
+Vin
2
4
-Vin
-Vout
6
+Vout
100
LOAD (%)
OUTPUT
80
BOTTOM VIEW
-25
0
25
50 60 71
100
Ta (
)
1.All parameters are specified at normal input, rated load, 25 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
3.Load regulation is measured from 10% to 100% rated load.
4.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.
File Name: SPR01-SPEC 2008-05-08