I&Q NETWORKS IQM-20B Series 1.2 to 2.5 GHz / Minimum 10% Bandwidth / Excellent Phase and Amplitude Balance / SMA Package PRINCIPAL SPECIFICATIONS Model Number RF/LO RF Center Freq., Bandfo , GHz width 90° Phase Accuracy, 10% LO Band LO=fo Typ. Max. Typ. Max. Amplitude Balance, dB, 10% LO Band LO=fo Typ. Max. Typ. Max. ±3° ±5° ±1° ±2° 0.3 0.5 0.1 10% of fo For complete Model Number replace **** with desired Center frequency, fo in MHz IQM-20B-****B 1.2 to 2.5 B-Package Outline 0.2 † 1. Tolerance on 3 place decimals ± .030(.76) except as noted. 2. Dimensions in inches over millimeters. 10 dB 12 dB GENERAL SPECIFICATIONS Input VSWR: RF Input Power Level: LO Input Power Level: Video Bandwidth: Weight, nominal: Impedance: Operating Temp: Higher Frequencies: NOTES: Conver. Loss (RF to I or Q) Typ. Max. 1.5:1 max. 0 dBm nom. +10 dBm nom. DC to†100 MHz nom. 3 oz (84 g) 50 Ω nom. -- 55° to +85°C See IQM-D series Video Bandwidth is typically much greater than 100 MHz General Notes: 1. I & Q networks are integrated networks that produce two quadrature phased, equal amplitude signals when fed RF and LO signals. 2. The IQM-2B and -20B series use both lumped element circuits and distributed circuit technologies for high performance in a proven flatpack design. 3. Merrimac I & Q Networks comply with the relevant sections of MIL-M-28837 and may be supplied screened for compliance with additional specifications for military and space applications requiring the highest reliability. 13Feb96 ForfurtherinformationcontactM ERRIM AC /41 Fairfield Pl.,W estCaldw ell,NJ,07006 / 973-575-1300 /FAX 973-575-0531