I&Q NETWORKS IQP-4R Series 10 to 300 MHz RF/LO Center Frequency / Octave LO BW / Hi-Rel Hermetic Package PRINCIPAL SPECIFICATIONS Model Number RF/LO Center Frequency, fo IQP-4R-***B 10 -- 300 MHz † Bandwidth MHz GENERAL SPECIFICATIONS RF and LO Input Characteristics Impedance: VSWR: RF Power Level: LO Power Level 67% of fo For complete Model Number replace *** with desired LO Center Frequency, fo in MHz. Meri-Pac R-Package Outline 50 Ω nom. 1.5:1 max. 0 dBm nom. +10 dBm nom. I & Q Output Characteristics Video Bandwidth: DC to †50 MHz nom. Output Impedance: Conversion Loss (RF to I or Q): IF Balance (I to Q) Phase: Amplitude: 10 dB typ, 12 dB max. 90° ±4° typ., ±5° max. 0.25 dB typ., 0.5 dB max. Weight, nominal: 0.32 oz (9 g) Operating Temp: -- 55° to +85°C † RF and Video Bandwidths are typically much greater than specified. AVAILABLE OPTIONS Higher Freq: (See IQP-4S series) Narrowband LO: (See IQP-20R series) NOTES: 1. Tolerance on 3 place decimals ±.010(.25) except as noted. 2. Dimensions in inches over millimeters. 3. Lead dimensions apply only at body. 4. All unmarked pins are case ground. Phase Balance: 90° ± 3° max. Conversion Loss: 8 dB typ.,10 dB max. 23Feb96 General Notes: 1. I & Q networks are integrated networks that produce two quadrature phased, equal amplitude signals when fed RF and LO signals. 2. The IQP-4R series of I&Q networks includes an octave band quadrature network to maintains a precise 90° relationship across a full octave of LO frequencies as may be required in some frequency agile communications systems. 3. Merrimac I & Q networks comply with the relevant sections of MIL-M-28837 and may be supplied screened for compliance with additional specifications for military and space applications requiring the highest reliability. ForfurtherinformationcontactM ERRIM AC /41 Fairfield Pl.,W estCaldw ell,NJ,07006 / 973-575-1300 /FAX 973-575-0531