MASTER INSTRUMENT CORPORATION HIGH VOLTAGE SILICON RECTIFIER HVM5-HVM12 VOLTAGE RANGE Forward Current 5000 to 12000 Volts 0.3-0.5 Amperes FEATURES l Low leakage l High surge capability l High current capability l High temperature soldering guaranteed: 200 oC/10 seconds, 0.375” (9.5mm) lead length at 5 lbs. (2.3kg) tension. MECHANICAL DATA l Case: Transfer molded plastic l Epoxy: UL94V-0 rate flame retardant. l Polarity: Color band denotes cathode end . l Lead: Plated axial lead solderable per MIL-STD-202E method 208C l Mounting Position: Any. l Weight: 0.05 ounce, 1.43 gram (DO-27) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20%. Dimension in inches and (millimeters) SYMBOLS HVM5 HVM8 HVM10 HVM12 UNITS Maximum Repetitive Peak Reverse Voltage VRRM 5000 8000 10000 12000 Volts Maximum RMS Voltage VRMS 3500 5600 7000 8400 Volts Maximum DC Blocking Voltage VDC 5000 8000 10000 12000 Volts Maximum Average Forward Rectified (9.5mm) Lead length at TA=50 o C Current,0.375” I(AV) 350 mAmps Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 40 Amps Maximum Instantaneous Forward Voltage Drop at .05A/0.2A VF Maximum DC Reverse Current at rated DC blocking voltage at TA=25 oC TA=100 oC IR 3.5 7.0 9.0 5.0 100 9.5 Volts µAmps Maximum Full Load Reverse Current ,full cycle average 0.375” (9.5mm) lead length at TL=75°C IR(AV) 75 µA Operating and Storage Temperature Range TJ , TSTG -65 to +150 o C NOTES: E-mail: [email protected] Web Site: www.cnmic.com 1/2 MASTER INSTRUMENT CORPORATION HIGH VOLTAGE SILICON RECTIFIER HVM5-HVM12 VOLTAGE RANGE Forward Current 5000 to 12000 Volts 0.3-0.5 Amperes RATINGS AND CHARACTERISTIC CURVES: E-mail: [email protected] Web Site: www.cnmic.com 2/2