MMV-110 Micro Micro 1-Channel 15 MHz Video Micro-size One-channel (IM) Video Transmitter Video Audio Data The MMV-110 Micro is an Intensity Modulated (IM), LED-based fiber optic Video transmitter. NTSC, PAL and SECAM compatible, the Micro is ideal for B&W or color CCTV camera transmission. System Design The MMV-110 Micro transmitter has a compact, cylindrical casing and features a BNC mount. This unit is also available without the casing, as a hybrid card suitable for soldering. The MMV-110 Micro transmitter is paired with the MMV-110 Standard or Mini receiver, both of which provide Automatic Gain Control (AGC). Please see the MMV-110 Standard or MMV110 Mini product pages for specific system design features. The MMV-110 Micro transmitter is also compatible with any of Opticomm’s Insert Card receivers, which can be mounted into a Desk Card Rack (DTCR-1, 2, 4 or 7) or the CC-18-80W chassis. This allows for greater flexibility and future expansion. Each of our card housings operates with an appropriate power supply. 865 • 1310 1550 Type Mode Wavelength Suffix LED MM L0 Features • Multimode operation over one fiber • 15 MHz video bandwidth with AGC • True DC Restoration • Flat Frequency Response • Complies with RS-170, & 170A EIA video standards • Compatible with NTSC, PAL, and SECAM video signals • No EMI or RFI and no ground loops • Stand Alone or Rack Mount • Ideal for CCTV camera extensions Fiber Type Output Power Receiver Sensitivity Optical Loss Budget Range* Conn Type 50 /125µ 62.5/125µ -18 dBm -28 dBm 10 dB 2.5 km ST * Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Composite Video, Audio & Data Video Video in/out impedance Video in/out level Video bandwidth Differential gain Differential phase Linearity Tilt Compatibility Signal to noise ratio Connector type General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Vibration Shock 75 Ω 1 volt peak to peak, 1.5 volts max 10 Hz to 15 MHz @ -3dB < 1.5 % typical < 1.5° typical ± 1.1 % typical ≤ 0.5 % typical NTSC, PAL, SECAM, RS-170, RS-170A >67 dB using RS-250C standards @ 1 km BNC Micro cylinder: 2.0” L x 0.65 diameter Hybrid card: 1.8” L x 0.5” W -20° C to +70° C -30° C to +85° C 0 to 95% non-condensing 12 VDC (200 mA) Up to 5 g's Up to 12 g's Diagnostics Status monitoring Optiva™™Configurable Multi-Signal Optiva Transmission Platform Communication Platform LED indication Network Management Management Network SDI HD-SDI SDIand & HD-SDI Composite Video, Video, Composite Audio & & Data Data Audio Audio/FSK/Intercom RGB/VGA/DVI RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) (Ethernet/Serial/USB) Data 1 oz 1 oz CATV/RF & & L-Band L-Band CATV/RF Optical Switching, Switching, Routing Routing Optical & Redundancy & Redundancy Passive Multiplexing Multiplexing Passive Solutions Solutions Enclosures, Racks Racks Enclosures, & Frames Frames & Power Supplies Supplies Power and Accessories & Accessories Emissions: FCC Part 15, ICES-003, AS/NZS, 3548, EN55022 Immunity: ENVS0204, EN61000-4-2,3,4,5,6,11 Safety: UL1950, CAN/CSA 22.2, NO.950-95 MADE IN THE USA Sample Configuration