Oscilent Corporation | 202 Page 1 of 3 SMD Quartz Crystal Series Number Package Description Last Modified 202 UM-5 Gull Wing SMD Quartz Crystal Jan. 01 2002 . FEATURES - 10 MHz to 200 MHz frequency range - Smaller footprint than Series 201 - Resistance welded - Low profile - Tape and reel . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS CHARACTERISTICS UNITS fO 10.00 ~ 225.000 MHz Frequency Tolerance Ref @ +25ºC ±10 ~ ±50 PPM Frequency Stability Ref @ +25ºC ±10 ~ ±50 PPM Operating Temperature TOPR -10 ~ +60 (STD) ºC Storage Temperature TSTG -40 ~ +85 (STD) ºC Shunt Capacitance CO 7.0 max. pF Load Capacitance CL (Customer Specified) 16, 20, 30, Series pF DL 10.0 ~ 1000.0 µW Fundamental 10 ~ 50 3rd Overtone 30 ~ 150 5th Overtone 80 ~ 200 Frequency Range Drive Level Overtone Order MHz . MODE OF OSCILLATION AND EQUIVALENT SERIES RESISTANCE . FREQUENCY RANGE (MHz) MODE MAX ESR Ohm FREQUENCY RANGE (MHz) MODE MAX ESR Ohm 10.0 ~ 15.9 Fundamental 60 30.0 ~ 150.0 3rd Overtone 80 16.0 ~ 50.0 Fundamental 50 100.0 ~ 200.0 5th Overtone 120 Oscilent Corporation | 202 Page 2 of 3 . PART NUMBER GUIDE Series Number Frequency Load Capacitance 202 - 10.000M -20 Oscilent UM-5 Surface Mount Crystal Tolerance @ +25oC Tolerance Over Temp ( oC ) Operating Temp ( oC ) G S - 20 See table below for Enter desired frequency standard load e.g. 12.0M for 12.000 capacitances and enter MHz. See table below your required load for standard capacitance. e.g. 20 = frequencies. 20pF Enter SR for Series Blank * = ±30 PPM 50 = ±50 PPM 20 = ±20 PPM 15 = ±15 PPM 10 = ±10 PPM Blank* = G= H= K= L= ±50 PPM ±30 PPM ±20 PPM ±15 PPM ±10 PPM Blank* = S= T= W= -10~+60 -20~+70 -30~+80 -40~+85 NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: - "Blank" part number selections indicate standard variables for that particular characteristic. **PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications . STANDARD FREQUENCIES / LOAD CAPACITANCE - FOR GUIDE ONLY / OTHER FREQ/LOADS AVAILABLE FREQUENCY (MHz) LOAD (pF) Series 12 13 16 17 18 20 30 10.000 Std. - - - - - - - 10.738635 Std. - - - - - - - Oscilent Corporation | 202 Page 3 of 3 11.000 Std. - - - - - - - 11.046 Std. - - - - - - - 11.0592 Std. - - - - - Std. Std. 11.228 Std. - - - - - - - 11.520 Std. - - - - - - - 11.98135 Std. - - - - - - - 12.000 Std. - - - - - Std. Std. - - - - - - - - 12.096 Std. - - - - - - - 12.288 Std. - - - - - Std. - 13.5168 Std. - - - - - - - 14.31818 Std. - - - - - Std. - 14.690 Std. - - - - - - - 14.7456 Std. - - - - - Std. - 15.000 Std. - - - - - - - 16.000 Std. - - - - - Std. - - - - - - - - - 18.000 Std. - - - - - Std. - 18.432 Std. - - - - - Std. - 19.6608 Std. - - - - - Std. - 20.000 Std. - - - - - Std. - 22.1184 Std. - - - - - - - 24.000(F) Std. - - - - - Std. - 24.00014 (F) - - - - - - - - 35.2512 (OT) - - - - - - - - 38.00053 (OT) - - - - - - - - 40.32 (OT) - - - - - - - - 48.00 (OT) Std. - - - - - - - 49.86 (OT) - - - - - - Std. - Series 12 13 16 17 18 20 30 12.000393 16.000312 FREQUENCY (MHz) LOAD (pF) F = Fundamental | OT = 3RD OT NOTE: Other frequencies and load capacitance available. PLEASE SPECIFY IN PART NUMBER GUIDE. Series No.: 202 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map