IF SAW Filter Part Number Package Application Last Modified 835-IF65.0M-G 35.0 x 12.80 Base Station & Repeater Apr 18, 2007 . TYPE : 65.0 MHz Bandpass Filter 9.40 MHz Bandwidth PART NUMBER : 835-IF65.0M-G .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency - 65.0 - MHz Insertion Loss at Fo - 21.5 23.0 dB Source Impedance (single ended)* - 50 - ohm Load Impedance (single ended)* - 50 - ohm Bandwidth at -1.0 dB 9.20 9.28 - MHz Bandwidth at -3.0 dB 9.40 9.50 - MHz Bandwidth at -50.0 dB - 10.45 10.55 MHz Amplitude Ripple - 0.7 0.9 dBp-p Group Delay Variation - 80 120 nsec Absolute Delay at Fo - 3.46 - µsec 50 55 - dB - -72 - ppm/°C Ultimate Rejection Temperature Coefficient *With Matching Network (Reference Testing Environment Circuit as shown) Modifiy Impedance Values as necessary. . PACKAGE OUTLINE (mm) TEST FIXTURE Pin Description: IN-1, OUT-5, Ground-2,3,4,6,Case FREQUENCY RESPONSE Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 835-IF65.0M-G