Model 3789 BNC Male To Minigrabber Test Clip Breakout FEATURES: • Minigrabber® test clip hooks attach to terminal sizes up to .060” diameter • Converts BNC (Female) jacks to Minigrabber test clips for test versatility • BNC connector and Minigrabber test clip caps are molded directly onto the wire for pull strength durability and dust and moisture resistance • Grabber hook and BNC center contact are Gold-plated Beryllium Copper for optimum strength, excellent corrosion resistance and low contact resistance to ensure test signal integrity • Schematic: Black Minigrabber test clip to BNC shell, red Minigrabber test clip to BNC center contact MATERIALS: BNC: Nickel plated brass Center Contact: Gold-plated brass Insulation: polypropylene molded to BNC and wire Wire: 20 AWG, PVC Marking: “POMONA 3789” Minigrabber® test clip: Contact: Gold-plated Beryllium Copper, Insulation: Glass filled nylon, color: red and black Marking: “Pomona Electronics”, “Minigrabber” RATINGS: Operating Temperature: +55°C (+131°F) Max. Operating Voltage: Hand-held testing: 30VAC/60VDC Max. Hands free testing in controlled voltage environments: 300VRMS Max. ORDERING INFORMATION: Model 3789 *Custom lengths are available, contact Pomona Technical support: 800-241-2060 ([email protected]) All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1094107 Page 1 of 1