POMONA 6244-48-0

Model 6244
Minigrabber® Test Clip to Right Angle Sheathed Banana Plug
Newly designed Minigrabber® Test Clip Patch Cord complies with IEC 61010-2-31, which is the latest international
safety standard for test accessories.
Grabber width is a slim .36” (9,14 mm) for easier side by side stacking.
Grabber hook is gold plated beryllium copper to ensure signal integrity & attaches onto component leads up to .060”
(1,5 mm) O.D.
Grabber patch cord interfaces directly into the most popular multimeters configured with 4 mm sheathed safety jacks,
including Amprobe, Fluke, H-P, Tektronix and Wavetek.
Plug is molded directly to the cable in an integral one-piece design and the wire is double crimped for a long lasting
Multi-leaf banana spring material is nickel plated beryllium copper for extended insertion life & low contact resistance.
High strand count silicone insulated wire offers excellent flexibility and high temperature resistance.
Body: Polypropylene, Color per Part Number
Hook: Beryllium Copper, Gold Plated, compression Spring: Music Wire
Wire: 18 AWG, 65 x 36 Tinned Copper, Insulation – Silicone, .144” (3,66 mm) O.D., Color per P/N
Banana Plug: Body – Brass, Nickel Plated, Spring – Beryllium Copper, Nickel Plated
Insulation – Polypropylene, Color per P/N
IEC 61010 2-031, Category II, P2 Compliant
Operating Voltage: 300 VRMS/DC Max.
Current: 5 Amperes Max.
Ordering Information
Model 6244-XX-*
XX = Length in Inches, Standard Length: 48” (122 cm)
* = Color Code, -0 Black, -2 Red
Sales: 800-490-2361
Technical Support: [email protected]
Fax: 425-446-5844
Europe: 31-(0) 40 2675 150 International: 425-446-5500
Where to Buy: www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks are
the property of their respective companies.
Copyright © 2009
D1094493 Rev. 100
Page 1 of 1