SLIM-PACTM Single Phase Rectifier Bridge PSB 15 IdAV VRRM = 21 A = 600-1200 V Preliminary Data Sheet + VRSM VRRM Type VDSM VDRM (V) (V) 700 600 PSB 15/06 900 800 PSB 15/08 1300 1200 PSB 15/12 ~A ~N K Features Symbol Test Conditions I*dAV IFSM TC = 100 °C, (per module) ∫ i2 dt TVJ TVJM Tstg VISOL Maximum Ratings 21 A • • • • • Package with DCB ceramic base plate • UL registered, E 148688 Isolation voltage 3000 V∼ TVJ = 45 °C t = 10 ms (50 Hz), sine 100 A VR = 0 t = 8.3 ms (60 Hz), sine 106 A TVJ = TVJM t = 10 ms (50 Hz), sine 85 A VR = 0 t = 8.3 ms (60 Hz), sine 90 A TVJ = 45 °C t = 10 ms (50 Hz), sine 50 A²s VR = 0 t = 8.3 ms (60 Hz), sine 47 A²s TVJ = TVJM t = 10 ms (50 Hz), sine 36 A²s Applications VR = 0 t = 8.3 ms (60 Hz), sine 33 A²s -40... + 150 150 °C °C -40... + 125 °C 50/60 Hz, RMS t = 1 min 2500 V∼ • • • • IISOL ≤ 1 mA 3000 t=1s Md Mounting torque Weight typ. (M4) 1.5 - 1.8 14 - 16 10 V∼ Nm lb.in. g Low forward voltage drop Leads suitable for PC board soldering Supplies for DC power equipment Input rectifier for PWM inverter Battery DC power supplies Field supply for DC motors Advantages • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Symbol Test Conditions IR VR = VRRM, TVJ = TVJM ≤ 0.3 mA VR = VRRM, TVJ = 25°C ≤ 5 mA IF = 7 A, ≤ 1.12 V Package style and outline 0.8 V Dimensions in mm (1mm = 0.0394“) 0.7 K/W Creeping distance on surface Creeping distance in air Max. allowable acceleration 8.2 9.7 50 mm mm m/s² Data according to IEC 60747 refer to a single diode unless otherwise stated *- for resistive load at bridge output + 0,3 per module 18 -0,3 0,3 21,6+-0,3 0,2 30,3+-0,2 mΩ K/W K/W K/W R2,15 40 2.3 0.575 2.8 per diode; DC per module per diode; DC R0,75 1 ds dA a For power-loss calculations only Small and light weight 5 RthJH TVJ = 25 °C • • 0,5 11,0+-0,2 VF VTO rT RthJC Characteristic Value Planar glass passivated chips 39 0,2 47+-0,2 POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 2005 POWERSEM reserves the right to change limits, test conditions and dimensions