Single Phase Solid State Relays Series: 20 SJ/K HIGHLIGHTS • • • • • • • • • • INPUT: DC CONTROL OUTPUT: DIRECT COPPER BONDED BACK-TOBACK SCR OPTO ISOLATION 2500 VAC (4000 V optional) ZERO VOLTAGE TURN-ON or RANDOM TURN-ON HIGH DV/DT SAFETY COVER (optional) REVERSE VOLTAGE PROTECTION FOR DC/AC RELAYS CHASSIS MOUNTABLE LED INDICATOR SHOWING RELAY ‘ON’ STATUS Weight = 106 g (J: Zero voltage turn-on; K: Random turn-on) 125 – 205 A ELECTRICAL SPECIFICATIONS Symbol DC CONTROL Control voltage range Control current range Pick-up voltage Input impedance Drop out voltage OUTPUT Main voltage range Repetitive peak off state voltage Rated Load current Zero turn-on voltage Off-state leakage current @ rated voltage Peak one cycle surge current (non-rep) Holding current Critical rate of rise of off-state voltage Thermal resistance (junction to case) Frequency range Operating temperature Turn-on time Turn-off time Fusing current @ 25°C (8.3ms) Type PSB 20 D 1212500 PSB 20 D 1215000 PSB 20 D 1217500 PSB 20 D 1220500 4-32 18-30 4.0 4-32 18-30 4.0 Current 1.0 4-32 18-30 4.0 regulator 1.0 4-32 18-30 4.0 Vdc mA Vdc 1.0 Vdc 1.0 VRMS VDRM IT IDRM ITSM IH dv/dt Rthjc f To T-on T-off Unit 48-660 1200/1600 125 35 1 1250 250 1000 0.35 47-63 -25 to +80 10 10 2 It 5000 48-660 48-660 48-660 1200/1600 1200/1600 1200/1600 150 175 205 35 35 35 1 1 1 1350 1500 2250 250 250 250 1000 1000 1000 0.35 0.25 0.1 47-63 47-63 47-63 -25 to +80 -25 to +80 -25 to +80 10 10 10 10 10 10 8000 15000 25000 Vac Vpk A Vac mA A mA V/µs K/W Hz °C ms ms 2 As released, E 197669 POWERSEM reserves the right to change limits, test conditions and dimensions - [email protected] - www.POWERSEM.net POWERSEM 2005 All rights reserved 75 Single Phase Solid State Relays MECHANICAL SPECIFICATIONS Dimensions in mm 200 220 200 WITH FAN 160 180 140 160 WITHOUT FAN 120 100 80 60 40 C U R R E N T in A M P S C U R R E N T in A M P S 180 140 120 100 80 60 20 40 10 20 30 40 50 60 70 80 90 100 AMBIENT TEMPERATURE IN C HEAT SINK USED: FAN USED: FAN USED: 0,14 K/W 70 CFM FOR 125 A 100 CFM FOR 150 A - 175 A VALID FOR SERIES: PSB 20 SJK ( 125 A - 175 A ) 20 10 20 30 40 50 60 70 80 90 AMBIENT TEMPERATURE IN C HEAT SINK USED: FAN USED: 0,1 K/W 100 CFM FOR 205 A POWERSEM reserves the right to change limits, test conditions and dimensions - [email protected] - www.POWERSEM.net POWERSEM 2007 All rights reserved