PROTEC PMMAD1103-T7

05089
PMMAD SERIES
STEERING DIODE ARRAY
APPLICATIONS
✔
✔
✔
✔
High Frequency Data Lines
RS-232 & RS-422 Interface Networks
Ethernet - 10/100 Base T
Computer I/O Ports
IEC COMPATIBILITY (EN61000-4)
✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
✔ 61000-4-4 (EFT): 40A - 5/50ns
✔ 61000-4-5 (Surge): 24A, 8/20µs Level 2(Line-Ground) & Level 3(Line-Line)
SO-14
FEATURES
✔ 500 Milliwatt Continuous Power Dissipation
✔ ESD Protection > 40 kilovolts
✔ Low Insertion Loss & Cross-Talk
✔ Provides Protection for 8 I/O Lines
✔ Working Voltage > 50 Volts
✔ Low Leakage Current < 0.1µA
✔ Ultra Low Capacitance: 5pF Per Diode
✔ RoHS Compliant
MECHANICAL CHARACTERISTICS
✔
✔
✔
✔
Molded JEDEC SO-14 Package
Weight 0.15 grams (Approximate)
Available in Lead-Free Pure-Tin Plating(Annealed)
Solder Reflow Temperature:
Pure-Tin - Sn, 100: 260-270°C
✔ Consult Factory for Leaded Device Availability
✔ Flammability Rating UL 94V-0
✔ 16mm Tape and Reel Per EIA Standard 481
✔ Marking: Logo, Part Number, Date Code & Pin One Defined By Dot on Top of Package
PIN CONFIGURATION
+
I/O PORT
GND OR (-)
05089.R9 2/07
1
www.protekdevices.com
PMMAD SERIES
DEVICE CHARACTERISTICS
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
SYMBOL
VALUE
UNITS
PPK
500
Milliwatts
Continuous Power Dissipation
IP
400
mA
Repetitive Peak Forward Current @ tp = 5µs, F = 50kHz
IFRM
700
mA
Operating Temperature
TA
-55 to 150
°C
TSTG
-55 to 150
°C
Continuous Forward Current (Single Diode)
Storage Temperature
ELECTRICAL CHARACTERISTICS PER LINE
PART
NUMBER
See Note 1
@ 25°C Unless Otherwise Specified
REPETITIVE
PEAK
REVERSE
VOLTAGE
MAXIMUM
FORWARD
PEAK PULSE
CURRENT
MAXIMUM
FORWARD
VOLTAGE
MAXIMUM
REVERSE
LEAKAGE
CURRENT
MAXIMUM
CAPACITANCE
(Per Diode)
@ 10µA
VRRM
VOLTS
@ 8/20µs
IFM
AMPS
@ 100mA
VF
VOLTS
VRRM @ 40V
IR
µA
@ 4V, 1MHz
Cj
pF
50
40
1.2
0.1
5
Note 1: Device types include: PMMAD1103, MMAD1105, PMMAD1106 and PMMAD1109. Electrical characteristics apply to all device types.
FIGURE 1
PULSE WAVE FORM
IPP - Peak Pulse Current - % of IPP
120
tf
100
TEST
WAVEFORM
PARAMETERS
tf = 8µs
td = 20µs
Peak Value IPP
80
e-t
60
40
td = t I /2
PP
20
0
0
05089.R9 2/07
5
10
15
t - Time - µs
2
20
25
30
www.protekdevices.com
PMMAD SERIES
PIN CONFIGURATIONS
MMAD1103
MMAD1106
1
14
2
3
5
7
8
9
11
12
2
5
3
7
8
9
11
12
14
16 DIODE ARRAY
NC PINS 4, 6, 10 & 13
8 LINES OF PROTECTION
8 DIODE COMMON ANODE ARRAY
NC PIN 1, 4, 6, 10 & 13
8 LINES OF PROTECTION
MMAD1105
MMAD1109
14
2
3
5
7
8
9
11
12
8 DIODE COMMON CATHODE ARRAY
NC PINS 1, 4, 6, 10 & 13
8 LINES OF PROTECTION
05089.R9 2/07
7
8
5
4
3
2
1
8
9
10
11
12
13
14
7 ISOLATED DIODE ARRAY
(INDEPENDENT)
7 LINES OF PROTECTION
3
www.protekdevices.com
PMMAD SERIES
SO-14 PACKAGE OUTLINE & DIMENSIONS
PACKAGE OUTLINE
SO-14
-A-
8
14
-B1
P
M B M
0.010” (0.25 MM)
7 PL
7
PACKAGE DIMENSIONS
MILLIMETERS
MIN
MAX
DIM
DG
C
A
B
C
D
F
G
J
K
P
R
R X 45º
0º 10º
-TK
0.010” (0.25 MM)
M T B S
F
J
A S
8 PL
8.55
3.80
1.35
0.35
0.40
1.27 BSC
0.19
0.10
5.80
0.25
INCHES
MIN
MAX
10.00
0.386
0.393
4.00
0.150
0.157
1.75
0.054
0.068
0.49
0.014
0.019
1.25
0.016
0.049
1.27 BSC 0.05 BSC 0.05 BSC
0.25
0.008
0.009
0.25
0.004
0.009
6.20
0.229
0.244
0.50
0.010
0.019
NOTES
MOUNTING PAD
1.
2.
3.
4.
5.
6.
0.050” TYP
0.030” ± 0.005”
- T - = Seating Plane and Datum Surface.
Dimensions “A” and “B” are Datum.
Dimensions “A” and “B” do not include mold protrusions.
Maximum mold protrusion is 0.015” (0.380 mm) per side.
Dimensioning and tolerances per ANSI Y14.5M, 1982.
Dimensions are exclusive of mold flash and metal burrs.
TAPE & REEL/BULK ORDERING NOMENCLATURE
0.160” ± 0.005”
1. Surface mount product is taped and reeled in accordance
with EIA-481.
2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 16mm tape,
i.e., PMMAD1107-T7.
3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 16mm tape,
i.e., PMMAD1107-T13.
4. Suffix - LF = Lead-Free, Pure-Tin Plating,
i.e., PMMAD1107-LF-T13.
5. No Suffix = Product Shipped in Tubes of 55 pcs per Tube.
0.245” MIN
0.045” ± 0.005”
Outline & Dimensions: Rev 1 - 11/01, 06006
COPYRIGHT © ProTek Devices 2007
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC).
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is
the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such
products.
05089.R9 2/07
4
ProTek Devices
2929 South Fair Lane, Tempe, AZ 85282
Tel: 602-431-8101 Fax: 602-431-2288
E-Mail: [email protected]
Web Site: www.protekdevices.com
www.protekdevices.com