05165 ET720 Only One Name Means ProTek’Tion™ STEERING DIODE ARRAY APPLICATIONS ✔ Ethernet - 10/100/1000 Base T ✔ Cellular Phones ✔ Handheld Electronics ✔ FireWire ✔ USB Interface IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-Gnd) & Level 2(Line-Line) SO-16 FEATURES ✔ ESD Protection > 40 kilovolts ✔ Provides 14 Lines of Protection ✔ LOW LEAKAGE CURRENT < 20nA ✔ ULTRA LOW CAPACITANCE: 3pF Typical MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-16 ✔ Weight 0.15 grams (Approximate) ✔ Flammability rating UL 94V-0 ✔ 16mm Tape and Reel Per EIA Standard 481 ✔ Marking: Part Number, Logo, Date Code & Pin One Defined By Dot on Top of Package PIN CONFIGURATION 05165.R3 8/03 VCC VIO VI/O VI/O VI/O VI/O VI/O VI/O 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 VI/O VI/O VI/O VI/O VI/O VI/O VI/O GND 1 www.protekdevices.com ET720 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS TJ -55°C to 150°C °C Storage Temperature TSTG -55°C to 150°C °C Continuous Power Dissipation PPC 145 mW PARAMETER Operating Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER DEVICE MARKING ET720 ET720 MAXIMUM PEAK PULSE FORWARD CURRENT MAXIMUM REVERSE LEAKAGE CURRENT MAXIMUM QUIESCENT SUPPLY CURRENT TYPICAL CAPACITANCE (See Note 2) VRRM VOLTS 8/20µs @1A VF VOLTS 8/20µs IFM AMPS VRRM@20V IR nA @20V IRQ nA @0V, 1 MHz Cj pF 30 2 12 20 200 3 REPETITIVE PEAK REVERSE VOLTAGE (See Note 1) TYPICAL FORWARD VOLTAGE Note 1: VRRM is +VCC for pin 16, -VEE for pin 1. Note 2: Measure Cj between any VI/O pins to ground and divide by 2. FIGURE 1 NON-REPETITIVE PEAK PULSE CURRENT CAPABILITY 120 IPP - Peak Pulse Current - % of IPP Peak Pulse Current - Amps 8 6 4 2 0 0.001 05165.R3 8/03 FIGURE 2 PULSE WAVE FORM tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t I /2 PP 20 0 0.01 0.1 1 Square Wave Pulse - ms 10 100 2 0 5 10 15 t - Time - µs 20 25 30 www.protekdevices.com ET720 GRAPHS 200 Forward Current - mA 160 FIGURE 3 TYPICAL LOW CURRENT FORWARD VOLTAGE DROP TA = 25°C SINGLE PULSE See Figure 2 120 80 40 0 600 5 Forward Current - A 4 800 1,000 Forward Voltage Drop - mV 1,200 FIGURE 4 TYPICAL HIGH CURRENT FORWARD VOLTAGE DROP TA = 25°C SINGLE PULSE See Figure 2 3 2 1 0 0 05165.R3 8/03 1 2 Forward Voltage Drop - V 3 3 www.protekdevices.com ET720 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SO-16 -A- 9 16 -B- P 1 0.010” (0.25 MM) M B M 8 PL 8 PACKAGE DIMENSIONS DIM G R X 45º C 0º - 7º -TK 0.010” (0.25 MM) M F D 16 PL M T B S A S 9.80 3.80 1.35 0.35 0.40 1.27 BSC 0.19 0.10 5.80 0.25 INCHES MIN MAX 0.393 10.00 0.386 4.00 0.150 0.157 0.068 1.75 0.054 0.49 0.014 0.019 1.25 0.016 0.049 1.27 BSC 0.05 BSC 0.05 BSC 0.25 0.008 0.009 0.009 0.25 0.004 6.20 0.229 0.244 0.50 0.010 0.019 NOTES MOUNTING PAD 0.050” TYP 0.030” ± 0.005” 0.160” ± 0.005” J A B C D F G J K P R MILLIMETERS MIN MAX 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusions. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL/BULK ORDERING NOMENCLATURE 0.245” MIN 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 16mm tape, i.e., ET720-T7. 3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 16mm tape, i.e., ET720-T13. 4. No Suffix = Product Shipped in Tubes of 37 pcs per Tube. 0.045” ± 0.005” Outline & Dimensions: Rev 1 - 11/01, 06007 COPYRIGHT © ProTek Devices 2003 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05165.R3 8/03 4 www.protekdevices.com