END CAPS Qualtek Electronics QSEC HEAT SHRINKABLE CABLE END CAPS, 1000V WITH SPIRAL ADHESIVE COATING Features/Applications QSEC offers an economical means of sealing the ends of power and control cables to ensure a watertight seal. The internal surface of the end caps has a layer of spiral coated hot melt adhesive, which retains its flexible properties after recovery. Recommended for use both in open air and on underground power distribution cables with PVC, lead or XLPE sheaths. Protects against oxidation, ozone, UV radiation, etc. Operating temperature: -55°C to +110°C, 1000V Minimum shrink temperature: 120°C RoHS Compliant Protection against oxidation, ozone & UV radiation Easy to fit on cable end Ensures seal Technical Data Property Test Method Typical Data IEC 216 -55°C to +110°C Tensile Strength ASTM D 638 > 14 MPa Elongation at Break ASTM D 638 > 400% Density ASTM D 792 1.05 150°C, 168 hrs. > 300% Operating Temperature Elongation at Break After Aging Dielectric Strength IEC 243 > 15kV/ mm Volume Resistance IEC 93 > 10 14 Ω.cm Product Dimensions Part Number As Supplied (mm) D (min) Recovered (mm) D (max) A (+ 10%) L (+ 10%) Dw (+ 5%) For Cable Diameter (mm) Standard Packaging *(QB) (Qty) Standard Length End Cap QSEC105-12/4-QB200 12 4 15 40 2.6 4-10 200 QSEC110-14/5-QB200 14 5 18 45 2.2 5-12 200 QSEC115-20/6-QB150 20 6 25 55 2.8 6-16 150 QSEC120-25/8.5-QB150 25 8.5 30 68 2.8 10-20 150 QSEC130-35/16-QB100 35 16 35 83 3.3 17-30 100 QSEC135-40/15-QB100 40 15 40 83 3.3 18-32 100 QSEC140-55/26-QB50 55 26 50 103 3.5 28-48 50 QSEC150-75/36-QB40 75 36 55 120 4.0 45-68 40 QSEC160-100/52-QB30 100 52 70 140 4.0 55-90 30 QSEC170-120/60-QB15 120 60 70 150 4.0 65-110 15 QSEC180-145/60-QB15 145 60 70 150 4.0 70-130 15 QSEC190-160/82-QB10 160 82 70 150 4.0 90-150 10 QSEC200-200/90-QB10 200 90 70 160 4.2 100-180 10 Extended Length End Cap QSEC110L-14/5-QB200 14 5 30 55 2.2 5-12 200 QSEC130L-42/15-QB100 42 15 40 110 3.3 18-34 100 QSEC140L-55/23-QB50 55 23 70 140 3.8 25-48 50 QSEC145L-62/23-QB50 62 23 70 140 3.8 25-55 50 QSEC150L-75/32-QB40 75 32 70 150 4.0 40-68 40 QSEC150XL-75/36-QB40 75 36 70 170 4.2 45-68 40 QSEC160L-105/45-QB30 105 45 65 150 4.0 50-90 30 Notes: End cap with valve stem is available upon request. ISO-9001 Company www.qualtekusa.com QSEC-200C