QUALTEK QSEC_13

END CAPS
QSEC
HEAT SHRINKABLE CABLE END CAPS, 1000V
WITH SPIRAL ADHESIVE COATING
Features/Applications
QSEC offers an economical means of sealing the ends of power and control cables
to ensure a watertight seal. The internal surface of the end caps has a layer of
Recommended for use both in open air and on underground power distribution
cables with PVC, lead or XLPE sheaths. Protects against oxidation, ozone, UV
radiation, etc.
Operating temperature: -55°C to +110°C, 1000V
Minimum shrink temperature: 120°C
RoHS Compliant
Protection against oxidation,
ozone & UV radiation
L
Dw
A
D
Ensures seal
A-spiral hot melt adhesive
Technical Data
Property
Test Method
Typical Data
IEC 216
-55°C to +110°C
Operating Temperature
Tensile Strength
ASTM D 638
> 14 MPa
Elongation at Break
ASTM D 638
> 400%
Density
ASTM D 792
1.05
150°C, 168 hrs.
> 300%
Elongation at Break After Aging
Dielectric Strength
IEC 243
> 15kV/ mm
Volume Resistance
IEC 93
> 10
14
Ω.cm
Product Dimensions
Part Number
As Supplied
(mm)
D (min)
Recovered (mm)
D (max)
A (+ 10%)
L (+ 10%)
Dw (+ 5%)
For Cable
Diameter
(mm)
Standard
Packaging
*(QB)
(Qty)
Standard Length End Cap
QSEC105-12/4-QB200
12
4
15
40
2.6
4-10
200
QSEC110-14/5-QB200
14
5
18
45
2.2
5-12
200
QSEC115-20/6-QB150
20
6
25
55
2.8
6-16
150
QSEC120-25/8.5-QB150
25
8.5
30
68
2.8
10-20
150
QSEC130-35/16-QB100
35
16
35
83
3.3
17-30
100
QSEC135-40/15-QB100
40
15
40
83
3.3
18-32
100
QSEC140-55/26-QB50
55
26
50
103
3.5
28-48
50
QSEC150-75/36-QB40
75
36
55
120
4.0
45-68
40
QSEC160-100/52-QB30
100
52
70
140
4.0
55-90
30
QSEC170-120/60-QB15
120
60
70
150
4.0
65-110
15
QSEC180-145/60-QB15
145
60
70
150
4.0
70-130
15
QSEC190-160/82-QB10
160
82
70
150
4.0
90-150
10
QSEC200-200/90-QB10
200
90
70
160
4.2
100-180
10
Extended Length End Cap
QSEC110L-14/5-QB200
14
5
30
55
2.2
5-12
200
QSEC130L-42/15-QB100
42
15
40
110
3.3
18-34
100
QSEC140L-55/23-QB50
55
23
70
140
3.8
25-48
50
QSEC145L-62/23-QB50
62
23
70
140
3.8
25-55
50
QSEC150L-75/32-QB40
75
32
70
150
4.0
40-68
40
QSEC150XL-75/36-QB40
75
36
70
170
4.2
45-68
40
QSEC160L-105/45-QB30
105
45
65
150
4.0
50-90
30
Notes:
1. End cap with valve stem is available upon request.
2. * See page 13 - Part Number Guide for standard packaging codes.
3. Cross Reference Guide located on page 3.
www.Qualtekusa.com