TVS RECTRON 1.5KE SEMICONDUCTOR TECHNICAL SPECIFICATION SERIES GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 5.0 WATTS STEADY STATE FEATURES * * * * * * Plastic package has underwriters laboratory certificate Glass passivated chip construction 1500 watt surage capability at 1ms Excellent clamping capability Low zener impedance Fast response time 1.5KE 1.0 (25.4) MIN. .042 (1.07) DIA. .038 (0.96) .375 (9.5) .285 (7.2) .210 (5.3) .190 (4.8) Ratings at 25 o C ambient temperature unless otherwise specified. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. DIA. 1.0 (25.4) MIN. Single phase, half wave, 60 Hz, resistive or inductive load, For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA suffix for types 1.5KE 6.8 thru 1.5KE 450 Electrical characteristics apply in both direction o MAXIMUM RATINGS (At TA = 25 C unless otherwise noted) RATINGS SYMBOL VALUE UNITS P PPM Minimum 1500 Watts P M(AV) 5.0 Watts I FSM 200 Amps VF 3.5/5.0 Volts T J , T STG -55 to + 150 Peak Power Dissipation at T A = 25 oC, TP = 1mS ( Note 1 ) Steady State Power Dissipation at TL = 75 oC lead lengths, .375” ( 9.5 mm ) ( Note 2 ) Peak Forward Surge Current, 8.3ms single half sine wavesuperimposed on rated load( JEDEC METHOD ) unidirectional only Maximum Instantaneous Forward Current at 50.0A for unidirectional only ( Note 3 ) Operating and Storage Temperature Range o NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25 C per Fig.2. 2. Mounted on copper pad area of 0.8X0.8” ( 20X20mm ) per Fig.5. 3. VF = 3.5V for devices of V(BR) < 200V and VF = 5.0 Volts max.for devices of V(BR) > 200V. 0 C 2002-12 RATING AND CHARACTERISTIC CURVES ( 1.5KE6.8 THRU 1.5KE450CA ) FIG. 2 - PULSE DERATING CURVE Non-Repetitive Pulse Waveform Shown in Fig.3 TA = 25 10 1.0 0.1 0.1uS 1.0uS 10uS 100uS 1.0mS TP, PULSE WIDTH, sec 10mS PEAK PULSE POWER (PPP) OR CURRENT (IPP) DERATING IN PERCENTAGE,% PPPM, PEAK PULSE POWER, KW FIG. 1 - PULSE POWER RATING CURVE 100 100 75 50 25 0 0 10000 tr = 10usec. Unidirectional----Bidirectional Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of IPPM Peak Value IPPM CJ, CAPACITANCE, pF IPPM, PEAK PULSE CURRENT,% 75 100 125 150 175 200 50 TA, AMBIENT TEMPERATURE,( ) FIG. 4 - TYPICAL JUNCTION CAPACITANCE FIG. 3 - PULSE WAVEFORM 150 100 IPPM 2 10/1000usec. Waveform as Defined by R.E.A. HALF VALUE - 50 VR = 0 1000 f = 1MH Vsig = 50mVp-p TJ = 25 100 VR = RATED STAND-OFF VOLTAGE 10 0 0 1.0 2.0 t, TIME,mS 3.0 4.0 5 L = 0.375"(9.5mm) Lead Lengths 60Hz Resistive or Inductive Load 0.75 0.50 0.8X0.8X0.040" (20X20X1mm) Copper Heat Sinks 0.25 0 AMPERES PEAK FORWARD SURGE CURRENT 1.00 10 100 500 V(BR), BREAKDOWN VOLTACE, VOLTS FIG. 6 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL FIG. 5 - STEADY STATE POWER DERATING CURVE PM(AV), STEADY STATE POWER DISSIATION, WATTS 25 200 8.3ms Single Half Sine-Wave (JEDED Method) TJ = TJ max. 40 20 10 0 0 25 50 75 100 125 150 175 200 TL, LEAD TEMPERATURE ( ) 1 10 NUMBER OF CYCLES AT 60 Hz RECTRON 100 Waveform 8X20 Impulse DVc = Vc-V(BR) 20 1.5KE130 1.5KE100 10 1.5KE75 2.0 1.0 1.5KE39 1.5KE33 1.5KE6.8 1.5KE9.1 1.5KE18 1.5KE12 0.2 0.1 0.5 1 2.0 10 20 IPP, PEAK PULSE CURRENT, AMPS 50 FIG. 9 - INCREMENTAL CLAMPING VOLTAGE CURVE UNIDIRECTIONAL 100 Waveform 8X20 Impulse DVc = Vc-V(BR) 20 1.5KE200C 10 1.5KE75C 1.5KE39C 1.5KE30C 1.5KE15C 1.5KE11C 1.5KE7.5C 2.0 1.0 0.2 0.1 0.5 1 2.0 10 20 IPP, PEAK PULSE CURRENT, AMPS 50 FIG. 11 -INSTANTANEOUS FORWARD VOLTAGE CHARACTERISTICS CURVE 100 FORWARD CURRENT 1.5KE200 10 Pulse Width = 300uS 1% Duty Cycle TJ = 25 1 0.1 0 0.4 0.8 1.2 1.6 2.0 INSTANTANEOUS FORWARD CURRENT, AMPERES DVC, INCREMENTAL CLAMPING VOLTAGE 100 DVC, INCREMENTAL CLAMPING VOLTAGE FIG. 7 - INCREMENTAL CLAMPING VOLTAGE CURVE UNIDIRECTIONAL £KV-TEMPERATURE COEFFICIENT-mV/ DVC, INCREMENTAL CLAMPING VOLTAGE DVC, INCREMENTAL CLAMPING VOLTAGE RATING AND CHARACTERISTIC CURVES ( 1.5KE6.8 THRU 1.5KE450CA ) FIG. 7 - INCREMENTAL CLAMPING VOLTAGE CURVE UNIDIRECTIONAL 100 Waveform 10X1000 Impulse DVc = Vc-V(BR) 20 1.5KE200 1.5KE130 1.5KE75 10 1.5KE39 2.0 1.0 1.5KE33 1.5KE6.8 1.5KE9.1 0.2 0.1 0.5 1 2.0 10 20 IPP, PEAK PULSE CURRENT, AMPS 50 FIG. 7 - INCREMENTAL CLAMPING VOLTAGE CURVE UNIDIRECTIONAL 100 Waveform 10X1000 Impulse DVc = Vc-V(BR) 20 1.5KE200C 1.5KE75C 10 1.5KE39C 1.5KE30C 2.0 1.0 1.5KE15C 1.5KE11C 1.5KE7.5C 0.2 0.1 0.5 1 2.0 10 20 IPP, PEAK PULSE CURRENT, AMPS 50 FIG. 12 - BREAKDOWN VOLTAGE TEMPEATURE COEFFICIENT CURVE 1000 100 Unidirectional Bidirectional 10 1 5 10 20 50 200 100 500 V(BR), BREAKDOWN VOLTAGE, VOLTS RECTRON TRANSIENT VOLTAGE SUPPRESSORS 1500W SERIES TVS DIODES / 1.5KE ( CASE 10 ) 1500W Breakdown Voltage TYPE 1.5KE6.8 1.5KE6.8A 1.5KE7.5 1.5KE7.5A 1.5KE8.2 1.5KE8.2A 1.5KE9.1 1.5KE9.1A 1.5KE10 1.5KE10A 1.5KE11 1.5KE11A 1.5KE12 1.5KE12A 1.5KE13 1.5KE13A 1.5KE15 1.5KE15A 1.5KE16 1.5KE16A 1.5KE18 1.5KE18A 1.5KE20 1.5KE20A 1.5KE22 1.5KE22A 1.5KE24 1.5KE24A 1.5KE27 1.5KE27A 1.5KE30 1.5KE30A 1.5KE33 1.5KE33A 1.5KE36 1.5KE36A 1.5KE39 1.5KE39A 1.5KE43 1.5KE43A 1.5KE47 1.5KE47A 1.5KE51 1.5KE51A 1.5KE56 1.5KE56A MIN. MAX. (mA) Reverse Stand off Voltage VWM (Volts) 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 VBR (Volts) @IT Maximum Reverse Leakage at VWM ID(uA) Maximum Peak Pulse Current IPPM (Amps) Maximum Clamping Voltage at IPPM VC (Volts) 1000 1000 500 500 200 200 50 50 10 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 139 143 128 133 120 124 109 112 100 103 92.6 96.2 86.7 89.8 78.9 82.4 68.2 70.8 63.8 66.7 56.6 59.5 51.5 54.2 47 49 43.2 45.2 38.4 40 34.5 36.2 31.4 32.8 28.8 30.1 26.6 27.8 24.2 25.3 22.1 23.1 20.4 21.4 18.6 19.5 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 RECTRON TRANSIENT VOLTAGE SUPPRESSORS 1500W SERIES TVS DIODES / 1.5KE ( CASE 10 ) 1500W Breakdown Voltage VBR @IT (Volts) TYPE 1.5KE62 1.5KE62A 1.5KE68 1.5KE68A 1.5KE75 1.5KE75A 1.5KE82 1.5KE82A 1.5KE91 1.5KE91A 1.5KE100 1.5KE100A 1.5KE110 1.5KE110A 1.5KE120 1.5KE120A 1.5KE130 1.5KE130A 1.5KE150 1.5KE150A 1.5KE160 1.5KE160A 1.5KE170 1.5KE170A 1.5KE180 1.5KE180A 1.5KE200 1.5KE200A 1.5KE220 1.5KE220A 1.5KE250 1.5KE250A 1.5KE300 1.5KE300A 1.5KE350 1.5KE350A 1.5KE400 1.5KE400A 1.5KE440 1.5KE440A 1.5KE450 1.5KE450A Notes : MIN. MAX. (mA) Reverse Stand off Voltage VWM (Volts) 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 90.0 95.0 99.0 105 108 114 117 124 135 143 144 152 153 162 162 171 180 190 198 209 225 237 270 285 315 333 360 380 396 418 405 427.5 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100 95.5 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210 242 231 275 263 330 315 385 368 440 420 484 462 495 472.5 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 175 185 202 214 243 256 284 300 324 342 356 376 364 385 Maximum Reverse Leakage at VWM ID(uA) Maximum Peak Pulse Current IPPM (Amps) Maximum Clamping Voltage at IPPM VC (Volts) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 16.9 17.6 15.3 16.3 13.9 14.6 12.7 13.3 11.5 12.0 10.4 10.9 9.5 9.9 8.7 9.1 8.0 8.4 7.0 7.2 6.5 6.8 6.1 6.4 5.8 6.1 5.2 5.5 4.4 4.6 4.2 4.4 3.5 3.6 3.0 3.1 2.6 2.7 2.4 2.5 2.2 2.3 89.0 85.0 98.0 92.0 109 104 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 504 482 574 548 631 602 682 652 1. VBR measured after IT applied for 300ms. IT = square pulse or equivalent. 2. For bidirectional use C or CA suffixs for all types (ex. 1.5KE6.8C, 1.5KE450CA) electrical characteristics apply in both directions. 3. For bidirectional types having VWM of 10 volts and less, the ID Iimit is doubled. 4. All devices UL listed file# E211196. RECTRON