RECTRON DTC114WUA

DTC114WCA
SOT-23 DIGITAL TRANSISTOR
TRANSISTORS(NPN)
FEATURES
* Built-in bias resistors enable the configuration of an inverter
circuit without connecting external input resistors.
* The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input.
They also have the advantage of almost completely eliminating parasitic effects.
SOT-23
* Only the on/off conditions need to be set for operation marking device design easy.
MECHANICAL DATA
*
*
*
*
*
0.055(1.40)
0.047(1.20)
Case: Molded plastic
Epoxy: UL 94V-O rate flame retardant
Lead: MIL-STD-202E method 208C guaranteed
Mounting position: Any
Weight: 0.008 gram
0.006(0.15)
0.003(0.08)
0.043(1.10)
0.035(0.90)
f 0.022(0.55)
0.100(2.55)
0.089(2.25)
0.020(0.50)
0.012(0.30)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
0.079(2.00)
0.071(1.80)
O
Ratings at 25 C ambient temperature unless otherwise specified.
(2)
0.004(0.10)
0.000(0.00)
(1)
(2)
(3)
0.118(3.00)
0.110(2.80)
(1)
(1) IN
(2) GND
(3) OUT
(3)
Dimensions in inches and (millimeters)
MAXIMUM RATINGES ( @ TA = 25oC unless otherwise noted )
RATINGS
SYMBOL
LIMITS
UNITS
Supply voltage
VCC
50
V
Input voltage
VIN
-10~30
V
IO
100
IC(MAX)
100
Power dissipation
Pd
200
Junction temperature
Tj
150
Tstg
-55 ~150
Output current
Storage temperature
mA
mW
o
C
o
C
o
ELECTRICAL CHARACTERISTICS ( @ TA = 25 C unless otherwise noted )
CHARACTERISTICS
SYMBOL
MIN
TYP
MAX
Input voltage (VCC= 5V, IO= 100mA)
VI(off)
-
-
0.8
Input voltage (VO= 0.3V, IO= 2mA)
VI(on)
3
-
-
Output voltage (IO / II= 10mA / 0.5mA)
Vo(on)
-
0.1
0.3
V
II
Input current (VI= 5V)
UNITS
V
-
-
0.88
mA
Io(off)
-
-
0.5
mA
GI
24
-
-
-
Input resistance
R1
7
10
13
KW
Resistance ratio
R2 / R1
0.37
0.47
0.57
-
fT
-
250
-
MHz
Output current (VCC= 50V,VI= 0)
DC current gain (VO= 5V,IO= 10mA)
Transition frequency (VO= 10V,IO= 5mA, f= 100MHz)
Note : "Fully ROHS compliant", "100% Sn plating (Pb-free)".
2006-3
EQUIVALENT CIRCUIT (DTC114WCA)
IN
OUT
R1
R2
GND
IN
OUT
GND
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.