MMIC AP409 Product Features Application • 50 ~ 3500MHz • InGaP HBT MMIC • 33.5dBm Output IP3 • 15.5dB Gain • 18.8dBm P1 dB • On Chip Active bias • Pb Free / RoHS Standard • CDMA, W-CDMA Medium Power Amplifier • High Linearity Drive Amplifier Package Type: SOT-89 Description AP409 is a gain block amplifier designed with InGaP HBT MMIC in a low cost SOT-89 package. This MMIC amplifier is designed for use as driver devices for infrastructure equipment in the 50~3500MHz Wireless technologies such as Cellular, GSM, PCS CDMA, W-CDMA. Specifications PARAMETER Units Min Typ Gain (S21) dB 14 15.5 15.3 15.2 Input Return Loss (S11) dB -18 -22 -22 Output Return Loss (S22) dB -20 -19 -19 Output 3rd Order Intercept Point (OIP3) dBm +33.5 +30 +27 Output 1dB compression Point (P1dB) dBm +18.8 +18 +16.5 Noise Figure dB 5 5.1 5.1 DC Operating Current mA 65 52 Supply Voltage Vdc +4.8 +4.5 Thermal Resistance (Rth) ℃/W +30 55 Max 70 85 +5 Typ 150 Test Condition ① 900MHz, Vdc=5V at 25℃ ② OIP3 is measured with two tones, at an output power of +5dBm/tone separated by 1MHz. Absolute Maximum Ratings PARAMETER Rating Operating Case Temperature (℃) -40 ~ +85 Storage Temperature (℃) -50 ~ +150 Supply Voltage +6 Junction Temperature (℃) +220 Remark ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3 MMIC AP409 Performance Charts (Vd=5V, Id=70mA, Tc=25℃) OIP3 vs. Frequency 17 40 16 35 15 14 13 -40℃ 25℃ 80℃ 12 11 OIP3(dBm) Magnitude(dB) Gain vs. Frequency 25 20 10 100 500 1000 1500 2000 2500 3000 3500 Frequency(MHz) -40℃ 25℃ 85℃ 0 500 -5 -10 -15 -20 -25 -30 -35 -40 -45 500 1000 1500 2000 2500 3000 3500 -40℃ 25℃ 85℃ 0 Frequency(MHz) 500 1000 1500 2000 2500 3000 3500 Frequency(MHz) P1dB vs. Frequency 6.5 22 6 20 P1dB(dBm) Noise Figure(dB) Noise Figure vs. Frequency 5.5 5 4.5 18 16 14 12 4 3.5 100 900 1900 2140 2400 2700 3000 Frequency(MHz) Output Return Loss vs. Frequency Magnitude(dB) Magnitude(dB) Input Return Loss vs. Frequency -5 -10 -15 -20 -25 -30 -35 -40 -45 -40℃ 25℃ 85℃ 15 10 0 30 500 900 1900 2140 Frequency(M Hz ) 2400 2700 10 100 500 900 1900 2140 2400 2700 3500 Frequency (MHz) ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3 MMIC AP409 Block Diagram Application Circuit +5V 0 L1 C1 RF Input C3 C4 C5 C2 Z=50 Z=50 L=3mm L=5mm Recommended Component Values 70MHz 500MHz-3000MHz L1 560nH C1,C2,C3 RF Output Recommended Bias Resistor Values Vsupply Rbias(5V) Rbias(4.8V) Rbias(4.5V) 100nH 6V 14 18 28 0.1uF 1000pF 7V 28 33 48 C4 1000pF 0.1uF 8V 42 49 67 C5 4.7uF/16V 4.7uF/16V 9V 57 64 86 ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3 MMIC AP409 Performance Charts (Vd=5V, Id=70mA, Tc=25℃) Frequency MHz 100 500 900 1900 2140 2400 2700 3500 Gain dB 15.6 15.6 15.5 14.8 14.5 14.4 14.1 13.5 S11 dB -11 -17 -18 -35 -33 -29 -26 -15 S22 dB -10 -38 -20 -13 -13 -13 -14 -18 OIP3 dBm 32.5 33.5 33.5 32.5 32 31.5 31.5 P1dB dBm 18 18.9 18.8 18.3 18.4 18.4 18.3 Noise Figure dB 4.75 5 5 5.2 5.3 5.3 5.3 OIP3 vs. Frequency 17 40 16 35 OIP3(dBm) Magnitude(dB) Gain vs. Frequency 15 14 13 12 30 25 20 15 11 0 500 10 100 1000 1500 2000 2500 3000 3500 500 900 1900 2140 2400 2700 3000 Frequency(MHz) Frequency(MHz) Input Return Loss vs. Frequency Output Return Loss vs. Frequency 0 0 -10 -10 Magnitude(dB) Magnitude(dB) 18 -20 -30 -40 -50 -20 -30 -40 -50 -60 -60 0 500 0 1000 1500 2000 2500 3000 3500 Frequency(MHz) 500 1000 1500 2000 2500 3000 3500 Frequency(MHz) 70MHz Performance 24 Typical Specifications 50~200MHz Gain(S21) 16dB Return Loss(S11) -15dB Return Loss(S22) -23dB OIP3 32.5dBm Noise Figure 4.7dB P1dB 19dBm Magnitude(dB) 16 Frequency 8 S11 0 S21 -8 S22 -16 -24 -32 50 80 110 140 Frequency(MHz) 170 200 ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3 MMIC AP409 Performance Charts (Vd=4.8V, Id=65mA, Tc=25℃) Frequency MHz 500 880 960 1860 2140 2700 3500 Gain dB 15.5 15.3 15.3 14.6 14.3 12.6 12.2 S11 dB -19 -22 -23 -27 -26 -26 -17 S22 dB -31 -19 -17 -13 -14 -15 -10 OIP3 dBm 30.5 30 30 30 29 28.5 28 P1dB dBm 18.1 18 18 17.5 17.1 16.5 16 Noise Figure dB 5.1 5.1 5.1 5.2 5.2 5.3 5.3 S-Parameter vs. Frequency 20 OIP3 vs. Frequency Noise Figure vs. Frequency P1dB vs. Frequency 40 OI P3(d B m) M ag ni tud e(d B ) 10 0 -10 -20 30 20 10 -30 -40 500 0 500 1000 1500 2000 2500 3000 3500 1000 F r e q u e n c y (M Hz ) 2000 2500 3000 3500 3000 3500 P1dB vs. Frequency 8 25 7 20 P1d B (d B m) N o i s e F i g ur e(d B ) Noise Figure vs. Frequency 6 5 4 500 1500 F r e q u e n c y (M Hz ) 15 10 1000 1500 2000 2500 F r e q u e n c y (MHz ) 3000 3500 5 500 1000 1500 2000 2500 F r e q u e n c y (M Hz ) ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3 MMIC AP409 Performance Charts (Vd=4.5V, Id=52mA, Tc=25℃) Frequency MHz 500 880 960 1860 2140 2700 3500 Gain dB 15.5 15.2 15.2 14.5 14.1 12.4 12 S11 dB -19 -22 -23 -27 -26 -26 -17 S22 dB -30 -19 -17 -13 -14 -15 -10 OIP3 dBm 27.5 27 27 26 25 24 24 P1dB dBm 16.7 16.5 16.4 15.6 15.2 14.9 14.1 Noise Figure dB 5.1 5.1 5.1 5.2 5.25 5.27 5.3 S-Parameter vs. Frequency OIP3 vs. Frequency 20 40 OI P3(d B m) M ag ni tud e(d B ) 10 0 -10 -20 30 20 10 -30 -40 500 0 500 1000 1500 2000 2500 3000 3500 1000 F r e q u e n c y (MHz ) 3000 3500 3000 3500 P1dB vs. Frequency 8 25 7 20 P1d B (d B m) N o i s e F i g ur e(d B ) 2000 2500 F r e q u e n c y (M Hz ) Noise Figure vs. Frequency 6 5 4 500 1500 15 10 1000 1500 2000 2500 F r e q u e n c y (MHz ) 3000 3500 5 500 1000 1500 2000 2500 F r e q u e n c y (M Hz ) ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3 MMIC AP409 Package Dimensions (Type: SOT-89) Pin No Function 1 Input 2 Ground 3 Output/Bias 4 Ground ! ESD sensitive Observe precautions for handling, testing and packaging. Recommended Pattern Recommended Mounting Configuration RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3