OGN Fuseholder Blocks & Clips www.schurter.com/pg02b Fuseholder Open Design, 5 x 20 mm, THT, var. Covers, IEC 60335-1 250 VAC · 4 W / 10 A (VDE) · 500 VAC/DC · 10 A (UL/CSA) Description -Meets the new requirements of IEC 60335-1 Ed. 4.0 for appliances in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. Order number: 0031.82x1.15 -Low profile fuse block with insulation walls -Screw or rivet fastening Standards -IEC 60127-6 -UL 4248-1 / UL 512 -CSA C22.2 no. 39 Applications -Industrial electronic -Household appliances References General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN) Approvals -VDE License Number: 40001042 -UL File Number: E39328 Technical Data Fuse-Link Mounting Mounting Terminal Rated Voltage Rated Current Rated Power Acceptance IEC Soldering Methods Solderability 5 x 20 mm PCB Screw or Rivet Solder THT 250 VAC (VDE), 500 VAC/DC (UL/CSA) 10 A (VDE), 10 A (UL/CSA) 4 W / 10 A @ Ta 23 °C 2.5 W / 10 A with transparant cover, see derating curves Degree of Protection IP 00 / IP 20 Protection Class Suitable for appliances with protection class 1 or 2 acc. to IEC 61140 Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Socket see variants Material: Terminals Tin-Plated Copper Alloy Unit Weight (Socket/Cap) 1.7 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking , Type, Voltage, Power Acc./Current Rating, Approvals Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Resistance to Vibration Fuses Wave 235 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 1 260 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 1A < 5 mΩ at 20 mV > 3 kV between L-N (50 Hz; 1 min) > 4 kV between L-N > 10 MΩ between L-N (500 VDC; 1 min) I - III acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 acc. to IEC 60068-2-6, test Fc OGN Fuseholder Blocks & Clips www.schurter.com/pg02b Abmessungen 22.5 mm 25 +0.1 0 9.6 90˚ 1.3 12.7 4 11.5 22.5 ø 2.7 22.5 25 1.1 10.8 22.5 25 Drilling diagram Admissible Power Acceptance in Watt 2.5 2.0 I = 1.0 In 1.5 I = 0.7 In I = << In 1.0 0.5 0.0 0 20 40 4.0 Admissible Power Acceptance in Watt Derating Curves for Fuseholders With Transparent Cover 60 80 100 3.5 3.0 I = 1.0 In 2.5 I = 0.7 In 2.0 I = < < In 1.5 1.0 0.5 0.0 0 20 40 60 80 Ambient Air Temperature Ta °C Ambient Air Temperature Ta °C Variants Holder Pin distance Colour Holder Material Remark Order Number l 22.5 black Thermoplastic - 0031.8201 l 22.5 black Spec. Thermoplastic 1 Approvals pending 0031.8201.15 l 25 black Thermoplastic - 0031.8211 l 25 black Spec. Thermoplastic 1 Approvals pending 0031.8211.15 Spec. thermoplastic meet the new requirements of IEC 60335-1 Ed. 4.0 for appliances in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. Packaging Unit Bulk 128 x 91 x 60 mm (100 pcs.) Accessories Description Covers OGN, OGN-SMD Cover for Holder OGN, OGN-SMD Transparent Cover 0853.0551 Reflow-Cover 0853.0571 Cover, black, meets IEC 60335-1 Ed. 4.0 0853.0575 Reflow-Cover with Clamp 0853.0576 Carriage OGN, OGN-SMD Fuse Carriage with Handle for OGN, OGN-SMD black 0853.1201 white 0853.1202 blue 0853.1203 brown 0853.1204 Fuses 100 OGN Fuseholder Blocks & Clips www.schurter.com/pg02b The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments.